轧后冷却工艺对模拟CSP含铜Hi-B钢热轧组织和结构的影响

以模拟CSP工艺-真空感应炉熔炼含铜Hi-B钢(/%:0.06C,3.38Si,0.14Mn,0.013P,0.003S,0.019Als,0.37Cu,0.001 50,0.008 7N)模铸成210 mm×120 mm×60 mm板,Φ350 mm二辊热轧机1 065℃开轧经5道次从60 mm轧成3.5 mm板(终轧865℃)为试验基板,研究了轧后水冷和轧后水冷至580℃再空冷两种冷却工艺对实验钢组织和织构的影响。结果表明,热轧后水冷到580℃再空冷到室温的冷却方式有助于获得更高取向精准度的高斯织构、更低比例的黄铜织构以及其他合理的织构组成,较轧后水冷工艺更加适合实验钢。