期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
不锈钢吸收/氧化反应器焊接工艺研究及现场建造
1
作者 赵向东 《焊管》 2020年第6期18-22,34,共6页
针对不锈钢吸收/氧化反应器的焊接工艺及焊接过程中的控制要点,在对不锈钢吸收/氧化反应器焊接性能分析的基础上,结合现场实际情况,筛选出最佳焊接组合方法,针对锥体、底板、壁板、顶板不同部位,采取不同的焊接工艺及措施确保焊接质量... 针对不锈钢吸收/氧化反应器的焊接工艺及焊接过程中的控制要点,在对不锈钢吸收/氧化反应器焊接性能分析的基础上,结合现场实际情况,筛选出最佳焊接组合方法,针对锥体、底板、壁板、顶板不同部位,采取不同的焊接工艺及措施确保焊接质量。对焊接后的反应器进行了外观检查、尺寸测量和无损探伤,结果表明,焊接后的反应器符合设计要求,证明所选择的焊接工艺、焊接顺序和防变形措施合理可行。 展开更多
关键词 不锈钢 吸收/氧化反应器 焊接工艺
下载PDF
Removal of SO_2 and NO_x by Pulsed Corona Combined with in situ Ca(OH)2 Absorption 被引量:12
2
作者 黄立维 党永霞 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2011年第3期518-522,共5页
Removal of SO2 and NOx by pulsed corona combined with in situ alkali absorption was experimentally investigated.In the reactor,a plate-wire-plate combination is devised for generating pulsed corona and then alkaline a... Removal of SO2 and NOx by pulsed corona combined with in situ alkali absorption was experimentally investigated.In the reactor,a plate-wire-plate combination is devised for generating pulsed corona and then alkaline absorbent slurries were introduced into the reactor by a continuous band conveying system to capture the gaseous reaction products.It was found that both SO2 and NO could be removed by corona combined with in situ alkali absorption.The removal of SO2 increased to 75%with the corona discharge,compared with 60%removal only with Ca(OH)2 absorption.About 40%removal of NO was reached by pulsed corona combined with in situ Ca(OH)2 absorption.It was found that SO2 and NO in the gas stream are oxidized to SO3 and NO2 by pulsed corona respectively,and then absorbed by the alkali in the reactor.The removals of SO2 as well as NO were higher with Ca(OH)2 as the absorbent,compared with using CaCO3 or ZnO. 展开更多
关键词 pulsed corona ABSORPTION DENITRIFICATION DESULFURIZATION REMOVAL Ca(OH)2
下载PDF
Analysis of Absorption and Reaction Kinetics in the Oxidation of Organics in Effluents Using a Porous Electrode Ozonator
3
作者 Alexander P.Mathews Kishora K.Panda 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2012年第3期417-425,共9页
A novel electrode design for the in situ generation of ozone in the reaction zone of a tubular reactor is described in this work.The ozone generator uses a porous inner electrode tube in the corona discharge assembly,... A novel electrode design for the in situ generation of ozone in the reaction zone of a tubular reactor is described in this work.The ozone generator uses a porous inner electrode tube in the corona discharge assembly,and the ozone generated around the outer periphery of the porous tube diffuses into the tubular reactor and reacts with the contaminants in the fluid that is being treated.A mathematical model that includes absorption and second order reaction in the film is developed to describe ozonation kinetics of a contaminant dye in the tubular reactor.The model describes the experimental data for dye decolorization,oxidation byproducts,dissolved ozone,and ozone gas concentrations well.Model analysis indicates that the fast dye decolorization reaction occurs partly in the liquid film and partly in the bulk fluid.The model can be used in the selection of appropriate gas-liquid contactors for efficient oxidation of contaminants in effluents. 展开更多
关键词 ozonation kinetics absorption and reaction ozone generator
下载PDF
High-efficiency removal of NOx by a novel integrated chemical absorption and two-stage bioreduction process using magnetically stabilized fluidized bed reactors
4
作者 Zuoming Zhou Tianming Lin +2 位作者 Guohua Jing Bihong Lv Yixuan Liu 《Science China Chemistry》 SCIE EI CAS CSCD 2015年第10期1621-1630,共10页
To enhance the bioregeneration of Fe(II)EDTA and to avoid the inhibition of the components in nitrogen oxides(NOx) scrubbing solution, a novel integrated process of metal chelate absorption and two-stage bioreduction ... To enhance the bioregeneration of Fe(II)EDTA and to avoid the inhibition of the components in nitrogen oxides(NOx) scrubbing solution, a novel integrated process of metal chelate absorption and two-stage bioreduction was developed. In this process, magnetically stabilized fluidized beds(MSFB) were used as the bioreactors, and the phase diagram for the MSFB operation was determined. Factors including inlet NO, O2 and SO2 concentrations, magnetic field intensity, gas flow rate and liquid circulation rate, were studied experimentally to investigate their effects on NO removal. In addition, a mathematical model for NO removal in this integrated system was developed. The results revealed that the integrated system could be steadily operated with a high NO removal efficiency and elimination capacity, even under the condition of high NO and O2 shock-loading. The established model showed that NO removal efficiency was related to the spray column property and the active Fe(II)EDTA concentration, while the latter depends on the bioregeneration of the disabled absorbent in the MSFB. 展开更多
关键词 nitrogen oxides flue gas immobilized bacteria magnetically stabilized fluidized bed
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部