[Objective] The aim of this study was to study on expression of Bt protein in transgenic pest-resistant rice. [Method] Enzyme-linked immunosorbent assay （ELISA） was used to measure Bt protein expression in different...[Objective] The aim of this study was to study on expression of Bt protein in transgenic pest-resistant rice. [Method] Enzyme-linked immunosorbent assay （ELISA） was used to measure Bt protein expression in different tissues of transgenic pest-resistant rice at same growth stage. [Result] Absolute content of Bt protein from high to low was as follows： leaves 〉 immature seeds and glumes 〉 roots 〉 stems in different tissues of transgenic rice in grain-filling stage; Bt protein content of trans- genic rice changed a little in different growth stages （including tillering stage, booting stage, and grain-filling stage）; in general, its level declined a little in later growth stage, but the resistibility would not be influenced significantly. [Conclusion] The ex- periment is significant for pest prevention and transgenic rice breeding.展开更多
Stability of Defibrase in various pH buffer solutions was investigated. Enzyme-linked immuno-sorbent assay (ELISA) and coagulating time method were used to assess antigenic stability and coagulating stability, respect...Stability of Defibrase in various pH buffer solutions was investigated. Enzyme-linked immuno-sorbent assay (ELISA) and coagulating time method were used to assess antigenic stability and coagulating stability, respectively. The change of antigenic activities and coagulating activities of Defibrase in the same buffer solutions (pH 6, 7 and 8, with the exception of pH 3.6) showed similar tendency to decline with the time. Concentrated Defi-brase was relatively stable at neutral pH 6~7, more than 95% of its initial activities (100BUmL-1) was kept after a 10-day storage at 40 oC, whereas in pH 3.6 and pH 9 buffer solutions, diluted Defibrase was very labile. Addition of Triton X-100 or bovine serum albumin could effectively prevent loss of Defibrase by minimizing adsorption of De-fibrase to plastic surface (P<0.005). Concentration of Defibrase could also affect its stability in aqueous solutions.展开更多
In this paper,the content and density of adsorbed water in fine-grained soil are determined.According to the test results,the calculation method of compaction degree of the solid-phase and void ration of soil is impro...In this paper,the content and density of adsorbed water in fine-grained soil are determined.According to the test results,the calculation method of compaction degree of the solid-phase and void ration of soil is improved.Four kinds of fine-grained soils from different regions in China were selected,and the adsorbed water content and density of four kinds of fine-grained soils were determined by thermogravimetry and volumetric flask method.Furthermore,SEM and XRD experiments were used to analyze the differences in the ability of each soil sample to absorb water.In order to study the compression characteristics of adsorbed water,four saturated soil samples were tested by consolidation method.The results show that the desorption temperature range of the adsorbed water and its density were equal to 100−115℃and 1.30 g/cm^(3),respectively.Adsorbed water plays a positive role in keeping the compressibility of fine-grained soil at a low rate when it has high water content.Besides,adsorbed water can be a stable parameter and is difficult to discharge during the operation period of subgrade.The settlement of fine-grained soil embankment is predicted by engineering example,and compared with the result of conventional calculation method.The results show that it is more close to the field monitoring results by using the improved void ratio of soil as the parameter.展开更多
Co-crystalline zeolite FAU/LTA-0 was synthesized by hydrothermal method from lithium slag. To make the most of excess silicon and alkali sources in mother liquid derived from FAU/LTA-0, zeolite FAU/LTA-I b was synthes...Co-crystalline zeolite FAU/LTA-0 was synthesized by hydrothermal method from lithium slag. To make the most of excess silicon and alkali sources in mother liquid derived from FAU/LTA-0, zeolite FAU/LTA-I b was synthesized in the same method with the use of mother liquid by adding a certain amount of aluminum source. Influences of different adding ways of aluminum source and recycling dosages of mother liquid on synthesis of zeolites FALl/ LTA with mother liquid were investigated. The phase, microstructure and thermostability of FAU/LTA-0 and FAU/LTA-lb were characterized by XRD, SEM and TG-DTA. The calcium and magnesium cation exchange capacities （CECs） of the zeolites were determined. The results have shown that co-crystalline zeolite can be synthesized with the use of mother liquid by adding aluminum source after 2 h of reaction. Compared with FAU/LTA-0, the crystal twinning structure of FAU/LTA-lb became weaker, the grain size was smaller, and the thermostability was better. With a lower dosage of mother liquid, the content of P-type impurity in product decreased significantly, and the content of LTA phase increased. The reuse rate of mother liquid can reach 48%. The CECs of FAU/LTA-I b-150 can reach 343 mg CaCO3. g-1 and 180 mg MgC03. g-1, showing more excellent adsorption capacities than FAU/LTA-0 and commercial zeolite 4A. The full recycling use of mother liquid to synthesize zeolite FAU/LTA which can be applied for detergent not only improves resource utilization but also reduces oroduction cost.展开更多
A new metal-organic framework of MIL-101 was synthesized by hydrothermal method and the powder prepared was pressed into a desired shape. The effects of molding on specific surface area and pore structure were investi...A new metal-organic framework of MIL-101 was synthesized by hydrothermal method and the powder prepared was pressed into a desired shape. The effects of molding on specific surface area and pore structure were investigated using a nitrogen adsorption method. The water adsorption isotherms were obtained by high vacuum gravimetric method, the desorption temperature of water on shaped MIL-101 was measured by thermo gravimetric analyzer, and the adsorption refrigeration performance of shaped MIL-101-water working pair was studied on the simulation device of adsorption refrigeration cycle system. The results indicate that an apparent hysteresis loop ap-pears in the nitrogen adsorption/desorption isotherms when the forming pressure is 10 MPa. The equilibrium ad-sorption capacity of water is up to 0.95 kg·kg^-1 at the forming pressure of 3 MPa （MIL-101-3）. The desorption peak temperature of water on MIL-101-3 is 82℃, which is 7 ℃ lower than that of silica gel, and the desorption temperature is no more than 100 ℃. At the evaporation temperature of 10 ℃, the refrigeration capacity of MIL-101-3-water is 1059 kJ·kg^-1, which is 2.24 times higher than that of silica gel-water working pair. Thus MIL-101-water working pair presents an excellent adsorption refrigeration performance.展开更多
Objective To investigate the blood lead levels （BLLs） in the duration of pregnancy and 6-12 weeks after delivery, and analyze the influencing factors of BLLs in healthy pregnant women. Methods Pregnant women were r...Objective To investigate the blood lead levels （BLLs） in the duration of pregnancy and 6-12 weeks after delivery, and analyze the influencing factors of BLLs in healthy pregnant women. Methods Pregnant women were recruited from September 2009 to February 2010 at the prenatal clinic in Nanjing Maternity and Child Health Care Hospital. Altogether 174 healthy pregnant women without pregnant or obstetric complications or abnormal pregnancy outcomes were enrolled as the gravida group, and 120 healthy non-pregnant women as the control group. BLLs during pregnancy were determined by flame atomic absorption spectroscopy. Results BLLs in all the three pregnancy trimesters and postpartum were 59.8±24.3, 55.4±20.1, 55.9±19.7, and 67.6±17.4 μ/L, respectively, and the mean BLL in control group was 67.5±21.3 μg/L. BLLs during all the three trimesters were lower in the gravida group than in the control group （P=0.043, 0.021, and 0.028）. Furthermore, occupations, nutrients supplementation, and time of house/apartment painted were associated with BLLs in pregnant women. Lead-related occupations, cosmetics use, and living in a house painted less than 1 year before are risk factors of high BLLs among pregnant women, while calcium, iron, zinc, and milk supplements are protective factors. Conclusion Supplementing calcium, iron, zinc, and milk, or avoiding contact with risk factors may help people, especially pregnant women, to reduce lead exposure.展开更多
Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were wa...Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were water, 80%(v/v) ethanol, 1 mol/L Na Cl,2% HAc and 0.6 mol/L HCl. Zn, Cd and Cu in the extracts and samples were measured by flame atomic adsorption spectrometry. In sequential extraction procedures, water soluble form and ethanol soluble form are the main fractions for Zn, while water soluble form and Na Cl soluble form for Cd, and comparatively uniform distribution for Cu with the residue form most and HCl soluble form second. Single extraction procedures are used to compare the extraction efficiencies of the five reagents to screen appropriate extractants and operating conditions for liquid extraction to deal with large amount of harvested metal-contained biomass, which will pose a threat to the environment if treated improperly. The sequences of extraction efficiencies are HCl>Na Cl≈HAc>Water≈Ethanol for Zn and HCl≈Na Cl≈HAc>Water>Ethanol for Cd. As for Cu, all the five extractants cannot effectively extract Cu, but HCl achieves a higher efficiency(>70% in fresh samples, and 45%-60% in dried samples). Besides, extraction efficiencies for most extractants in fresh samples are higher than those in dried samples, and extraction efficiencies of stems and leaves for the five extractants are close. The two extraction procedures can obtain high degree of accuracy with the relative standard deviation(RSD)lower than 10%, and metal recoveries are controlled between 80%-120% with most of 90%-110%.展开更多
基金Transgenic cry1C Novel Materials of Japonica Rice Resistant Against Snout Moth’s Larva Cultivated with Biotechnology (201205068)The National Program of Transgenic Variety Development of China (2011ZX08001-001)~~
文摘[Objective] The aim of this study was to study on expression of Bt protein in transgenic pest-resistant rice. [Method] Enzyme-linked immunosorbent assay （ELISA） was used to measure Bt protein expression in different tissues of transgenic pest-resistant rice at same growth stage. [Result] Absolute content of Bt protein from high to low was as follows： leaves 〉 immature seeds and glumes 〉 roots 〉 stems in different tissues of transgenic rice in grain-filling stage; Bt protein content of trans- genic rice changed a little in different growth stages （including tillering stage, booting stage, and grain-filling stage）; in general, its level declined a little in later growth stage, but the resistibility would not be influenced significantly. [Conclusion] The ex- periment is significant for pest prevention and transgenic rice breeding.
文摘Stability of Defibrase in various pH buffer solutions was investigated. Enzyme-linked immuno-sorbent assay (ELISA) and coagulating time method were used to assess antigenic stability and coagulating stability, respectively. The change of antigenic activities and coagulating activities of Defibrase in the same buffer solutions (pH 6, 7 and 8, with the exception of pH 3.6) showed similar tendency to decline with the time. Concentrated Defi-brase was relatively stable at neutral pH 6~7, more than 95% of its initial activities (100BUmL-1) was kept after a 10-day storage at 40 oC, whereas in pH 3.6 and pH 9 buffer solutions, diluted Defibrase was very labile. Addition of Triton X-100 or bovine serum albumin could effectively prevent loss of Defibrase by minimizing adsorption of De-fibrase to plastic surface (P<0.005). Concentration of Defibrase could also affect its stability in aqueous solutions.
基金Project(51978085)supported by the National Natural Science Foundation of ChinaProject(K2019G045)supported by the Science and Technology Research and Development Plan of China National Railway Group Co.,Ltd.Project(201808430102)supported by the China Scholarship Council。
文摘In this paper,the content and density of adsorbed water in fine-grained soil are determined.According to the test results,the calculation method of compaction degree of the solid-phase and void ration of soil is improved.Four kinds of fine-grained soils from different regions in China were selected,and the adsorbed water content and density of four kinds of fine-grained soils were determined by thermogravimetry and volumetric flask method.Furthermore,SEM and XRD experiments were used to analyze the differences in the ability of each soil sample to absorb water.In order to study the compression characteristics of adsorbed water,four saturated soil samples were tested by consolidation method.The results show that the desorption temperature range of the adsorbed water and its density were equal to 100−115℃and 1.30 g/cm^(3),respectively.Adsorbed water plays a positive role in keeping the compressibility of fine-grained soil at a low rate when it has high water content.Besides,adsorbed water can be a stable parameter and is difficult to discharge during the operation period of subgrade.The settlement of fine-grained soil embankment is predicted by engineering example,and compared with the result of conventional calculation method.The results show that it is more close to the field monitoring results by using the improved void ratio of soil as the parameter.
基金Supported by the National Natural Science Foundation of China(51476074)
文摘Co-crystalline zeolite FAU/LTA-0 was synthesized by hydrothermal method from lithium slag. To make the most of excess silicon and alkali sources in mother liquid derived from FAU/LTA-0, zeolite FAU/LTA-I b was synthesized in the same method with the use of mother liquid by adding a certain amount of aluminum source. Influences of different adding ways of aluminum source and recycling dosages of mother liquid on synthesis of zeolites FALl/ LTA with mother liquid were investigated. The phase, microstructure and thermostability of FAU/LTA-0 and FAU/LTA-lb were characterized by XRD, SEM and TG-DTA. The calcium and magnesium cation exchange capacities （CECs） of the zeolites were determined. The results have shown that co-crystalline zeolite can be synthesized with the use of mother liquid by adding aluminum source after 2 h of reaction. Compared with FAU/LTA-0, the crystal twinning structure of FAU/LTA-lb became weaker, the grain size was smaller, and the thermostability was better. With a lower dosage of mother liquid, the content of P-type impurity in product decreased significantly, and the content of LTA phase increased. The reuse rate of mother liquid can reach 48%. The CECs of FAU/LTA-I b-150 can reach 343 mg CaCO3. g-1 and 180 mg MgC03. g-1, showing more excellent adsorption capacities than FAU/LTA-0 and commercial zeolite 4A. The full recycling use of mother liquid to synthesize zeolite FAU/LTA which can be applied for detergent not only improves resource utilization but also reduces oroduction cost.
文摘A new metal-organic framework of MIL-101 was synthesized by hydrothermal method and the powder prepared was pressed into a desired shape. The effects of molding on specific surface area and pore structure were investigated using a nitrogen adsorption method. The water adsorption isotherms were obtained by high vacuum gravimetric method, the desorption temperature of water on shaped MIL-101 was measured by thermo gravimetric analyzer, and the adsorption refrigeration performance of shaped MIL-101-water working pair was studied on the simulation device of adsorption refrigeration cycle system. The results indicate that an apparent hysteresis loop ap-pears in the nitrogen adsorption/desorption isotherms when the forming pressure is 10 MPa. The equilibrium ad-sorption capacity of water is up to 0.95 kg·kg^-1 at the forming pressure of 3 MPa （MIL-101-3）. The desorption peak temperature of water on MIL-101-3 is 82℃, which is 7 ℃ lower than that of silica gel, and the desorption temperature is no more than 100 ℃. At the evaporation temperature of 10 ℃, the refrigeration capacity of MIL-101-3-water is 1059 kJ·kg^-1, which is 2.24 times higher than that of silica gel-water working pair. Thus MIL-101-water working pair presents an excellent adsorption refrigeration performance.
基金supported by Nanjing Maternity and Child Health Care Hospital
文摘Objective To investigate the blood lead levels （BLLs） in the duration of pregnancy and 6-12 weeks after delivery, and analyze the influencing factors of BLLs in healthy pregnant women. Methods Pregnant women were recruited from September 2009 to February 2010 at the prenatal clinic in Nanjing Maternity and Child Health Care Hospital. Altogether 174 healthy pregnant women without pregnant or obstetric complications or abnormal pregnancy outcomes were enrolled as the gravida group, and 120 healthy non-pregnant women as the control group. BLLs during pregnancy were determined by flame atomic absorption spectroscopy. Results BLLs in all the three pregnancy trimesters and postpartum were 59.8±24.3, 55.4±20.1, 55.9±19.7, and 67.6±17.4 μ/L, respectively, and the mean BLL in control group was 67.5±21.3 μg/L. BLLs during all the three trimesters were lower in the gravida group than in the control group （P=0.043, 0.021, and 0.028）. Furthermore, occupations, nutrients supplementation, and time of house/apartment painted were associated with BLLs in pregnant women. Lead-related occupations, cosmetics use, and living in a house painted less than 1 year before are risk factors of high BLLs among pregnant women, while calcium, iron, zinc, and milk supplements are protective factors. Conclusion Supplementing calcium, iron, zinc, and milk, or avoiding contact with risk factors may help people, especially pregnant women, to reduce lead exposure.
基金Project(2013CB228106)supported by the National Key Basic Research Program of ChinaProject(2012AA06A204)supported by the National High Technology Research and Development Program of China
文摘Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were water, 80%(v/v) ethanol, 1 mol/L Na Cl,2% HAc and 0.6 mol/L HCl. Zn, Cd and Cu in the extracts and samples were measured by flame atomic adsorption spectrometry. In sequential extraction procedures, water soluble form and ethanol soluble form are the main fractions for Zn, while water soluble form and Na Cl soluble form for Cd, and comparatively uniform distribution for Cu with the residue form most and HCl soluble form second. Single extraction procedures are used to compare the extraction efficiencies of the five reagents to screen appropriate extractants and operating conditions for liquid extraction to deal with large amount of harvested metal-contained biomass, which will pose a threat to the environment if treated improperly. The sequences of extraction efficiencies are HCl>Na Cl≈HAc>Water≈Ethanol for Zn and HCl≈Na Cl≈HAc>Water>Ethanol for Cd. As for Cu, all the five extractants cannot effectively extract Cu, but HCl achieves a higher efficiency(>70% in fresh samples, and 45%-60% in dried samples). Besides, extraction efficiencies for most extractants in fresh samples are higher than those in dried samples, and extraction efficiencies of stems and leaves for the five extractants are close. The two extraction procedures can obtain high degree of accuracy with the relative standard deviation(RSD)lower than 10%, and metal recoveries are controlled between 80%-120% with most of 90%-110%.
