This is an improved design based on the existing plate type solar water heaters. It aims at making full use of solar energy. To fully absorb radiation, it absorbs coating selectively by adopting the magnetron sputteri...This is an improved design based on the existing plate type solar water heaters. It aims at making full use of solar energy. To fully absorb radiation, it absorbs coating selectively by adopting the magnetron sputtering technology AL-N/AL. this design conduct heat through aluminum material which can reduce the cost meanwhile conduct heat effectively. To ensure the quality of the water at the same time improve the utilization rate of solar energy, this design use phase change for second heat exchange. Take Shanghai for example, where this design and heat transfer model are applied, the average efficiency of water heaters can achieve 68%, which has proven the feasibility of the design. In a word, this design can achieve the goal of energy conservation and emissions reduction and has broad market prospects.展开更多
An experimental study was performed to evaluate the suitability of using an electrical capacitance tomography (ECT) system to visualize the flow patterns, and to measure the film thickness of the annular flow in a two...An experimental study was performed to evaluate the suitability of using an electrical capacitance tomography (ECT) system to visualize the flow patterns, and to measure the film thickness of the annular flow in a two-phase closed thermosyphon (TPCT). The performance of the ECT system was examined over a range of flow conditions.The experimental data were compared with the visual observations and existing correlations. Results indicated that the ECT system, with the linear back projection (LBP) algorithm, could be used to give an on-line qualitative image of the flow patterns. The Landweber iteration algorithm with optimal step length was implemented off-line to reconstruct high-resolution images. Then, the images were analyzed to obtain the film thickness of the annular flow. The experimental data compared well with the Nusselt's equation in low vapor velocity range, but showed an increasing deficiency with the increase of vapor velocity.展开更多
文摘This is an improved design based on the existing plate type solar water heaters. It aims at making full use of solar energy. To fully absorb radiation, it absorbs coating selectively by adopting the magnetron sputtering technology AL-N/AL. this design conduct heat through aluminum material which can reduce the cost meanwhile conduct heat effectively. To ensure the quality of the water at the same time improve the utilization rate of solar energy, this design use phase change for second heat exchange. Take Shanghai for example, where this design and heat transfer model are applied, the average efficiency of water heaters can achieve 68%, which has proven the feasibility of the design. In a word, this design can achieve the goal of energy conservation and emissions reduction and has broad market prospects.
文摘An experimental study was performed to evaluate the suitability of using an electrical capacitance tomography (ECT) system to visualize the flow patterns, and to measure the film thickness of the annular flow in a two-phase closed thermosyphon (TPCT). The performance of the ECT system was examined over a range of flow conditions.The experimental data were compared with the visual observations and existing correlations. Results indicated that the ECT system, with the linear back projection (LBP) algorithm, could be used to give an on-line qualitative image of the flow patterns. The Landweber iteration algorithm with optimal step length was implemented off-line to reconstruct high-resolution images. Then, the images were analyzed to obtain the film thickness of the annular flow. The experimental data compared well with the Nusselt's equation in low vapor velocity range, but showed an increasing deficiency with the increase of vapor velocity.
