乘用车内部凸出物头型吸能试验方法分析与研究

GB11552-2009《乘用车内部凸出物》标准作为国家强制性标准之一,对车内许多构件的吸能性提出了要求。本文通过分析GB11552-2009中的有关技术要求,探讨了头型吸能试验方法,通过实例比较介绍了乘用车内部构件吸能性试验,希望能给整车厂设计人员提供参考。

Anchoring effect and energy-absorbing support mechanism of large deformation bolt

To research the anchoring effect of large deformation bolt,tensile and drawing models are established.Then,the evolution laws of drawing force,bolt axial force and interfacial shear stress are analyzed.Additionally,the influence of structure element position on the anchoring effect of large deformation bolt is discussed.At last,the energy-absorbing support mechanism is discussed.Results show that during the drawing process of normal bolt,drawing force,bolt axial force and interfacial shear stress all gradually increase as increasing the drawing displacement,but when the large deformation bolt enters the structural deformation stage,these three values will keep stable;when the structure element of large deformation bolt approaches the drawing end,the fluctuation range of drawing force decreases,the distributions of bolt axial force and interfacial shear stress of anchorage section are steady and the increasing rate of interfacial shear stress decreases,which are advantageous for keeping the stress stability of the anchorage body.During the working process of large deformation bolt,the strain of bolt body is small,the working resistance is stable and the distributions of bolt axial force and interfacial shear stress are steady.When a rock burst event occurs,the bolt and bonding interface cannot easily break,which weakens the dynamic disaster degree.

Effect and mechanism of application in canicular days plus enteral nutrition for cough variant asthma in kids

Objective： To observe the clinical efficacy of application in canicular days plus enteral nutrition in treating cough variant asthma （CVA） in kids, and to explore its action mechanism. Methods： Following a randomized controlled single-blind parallel-group design, 138 eligible kids with CVA were randomized into an observation group, a canicular-day application group, and an enteral nutrition group, 46 kids in each group. The canicular-day application group was intervened by application in canicular days, the enteral nutrition group was by enteral feeding, and the observation group was by both canicular-day application and enteral feeding. The therapeutic efficacies were evaluated after a treatment course. Results： The recovery rate and total effective rate were respectively 50.0% and 98.0% in the observation group, versus 23.9% and 91.3% in the canicular-day application group, and 13.0% and 78.6% in the enteral nutrition group. The observation group was significantly superior to the other two groups （both P〈0.05）. In comparing the global symptom score, peak expiratory flow （PEF）, forced expiratory volume in one second （FEVl）, CD3^＋, CD4^＋, CD4^＋/CD8^＋, CD8^＋, hemoglobin （Hb）, total protein （TP）, albumin （ALB）, eosinophil cationic protein （ECP）, lipid peroxide （LPO）, leukotriene （LT）, body weight （BW）, triceps skin-fold （TSF）, and arm muscle circumference （AMC）, the observation group was significantly better than the other two groups （both P〈0.05）. Conclusion： Application in canicular days plus enteral nutrition can significantly improve the pulmonary function and symptoms in children＇s CVA, and the effect is possibly produced by regulating cellular immune system, enhancing Hb, TP, ALB, BW, TSF, AMC, and inhibiting the production of ECP, LPO, and LT.

Clinical study of optimizing acupoint combining in treatment of bronchial asthma with acupoint application

Objective:To observe the therapeutic efficacy of acupoint application at different groups of acupoints in treating bronchial asthma in remission stage.Methods:A total of 120 patients with bronchial asthma in remission stage were recruited and divided by the random number table method into acupoint application group 1,acupoint application group 2 and acupoint application group 3,with 40 cases in each group.In all the three groups,Tiantu(CV 22),Dazhui(GV 14)and Feishu(BL 13)were selected,with Dingchuan(EX-B 1)added in acupoint application group 1,Shenshu(BL 23)added in acupoint application group 2,and Gaohuang(BL 43)added in acupoint application group 3.Before intervention,one month and 3 months after intervention,clinical symptoms,peak expiratory flow(PEF)and forced expiratory volume in 1 second percentage of predicted value(FEV1%)of the three groups were observed,and their clinical efficacies were evaluated.Results:Comparing the therapeutic efficacy regarding traditional Chinese medicine symptoms and signs,after 1-month treatment,the total effective rate was 87.5%in acupoint application group 1,versus 62.5%in acupoint application group 2 and 55.0%in acupoint application group 3,and the between-group differences were statistically significant.After 3-month treatment,the total effective rate was 95.0%in acupoint application group 1,versus 70.0%in acupoint application group 2 and 65.0%in acupoint application group 3,and the between-group differences were statistically significant.After intervention,the three groups all showed significant improvements in pulmonary function with statistical significance;among the three groups,the improvement in acupoint application group 1 was more significant than that in the other two groups.Conclusion:Tiantu(CV 22),Dazhui(GV 14)and Feishu(BL 13)as basic prescription plus Dingchuan(EX-B 1)can improve symptoms of bronchial asthma in remission stage,and it works better in improving pulmonary function than the basic prescription plus Shenshu(BL 23)or Gaohuang(BL 43).

Influence of acupuncture on pulmonary function of patients with asthma： a review

Asthma is a common disease with recurrent onset which severely affects patients＇ quality of life. Acupuncture can improve pulmonary functions in asthma patients and thus treat this disorder. To summarize the status of acupuncture treatment for asthma, we have collected clinical literatures published in the recent 20 years and analyzed the influence of acupuncture on pulmonary functions in asthma patients from the aspects of frequently used points, needling techniques, manipulation and mechanisms to provide references for treating asthma with acupuncture.

Comparison of Phosphorus Sorption by Light-Weight Aggregates Produced in the United States

In this study, phosphorus(P) sorption of thirteen light-weight aggregates(LWAs) from USA was compared during batch equilibrium experiments in order to identify those materials which had the highest P sorption capacity for further study. Seven different levels of sorption activity were observed, which were broadly grouped into three categories—high performing, middle performing, and low performing aggregates. Chemical analysis of Ca, Al, Fe, and Mg was used to describe the differences between LWAs. There was a significant correlation between cation(especially Al, Ca, Fe, and Mg) content and P sorbed. Langmuir isotherms were used to describe P sorption maximum and binding affinity for four of the top five performing LWAs, Universal, Stalite "D", Stalite "Mix", and TXI.The fifth aggregate, Lehigh, exhibited more complex sorption, and was better described by the Freundlich isotherm. Universal had a mean P sorption at the highest concentration of 824 mg kg-1, well above its calculated sorption maximum(702 mg kg-1), and also had the highest binding affinity(1.1 L mg-1). This experiment suggests that the top performing LWA(Universal) may perform poorly in column and field studies due to observed precipitates, which could degrade constructed wetland performance. Other LWAs may exhibit superior field performance due to their high calculated sorption maxima. In general, these results highlight the importance of batch experiments as a first step in identifying materials suitable for column and field experiments.

Rational design of new phases of tin monosulfide by first-principles structure searches

Tin monosulfide(Sn S), which is composed of earth-abundant elements, holds promise as useful high-performance solar absorber and thermoelectric material. In addition to the ground-state Pnma phase, a series of metastable phases in different crystalline structures have been reported experimentally or theoretically, yet the phase stability diagrams remain elusive. In this article, we provide a comprehensive materials design study of new phases of Sn S using first-principles global optimization structure search calculations. We find that the two-dimensional layered phases are generally more energetically favored than the three-dimensional connected phases. In addition, we discover several new phases with comparable energetics. Four lower-energy phases show clear phonon stabilities evidenced by an absence of imaginary modes. The electronic band structures, carrier transport properties, and absorption spectra of the newly discovered phases are investigated and discussed toward potential applications for solar cells and thermoelectric devices.