期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
高吸湿纤维的吸附——解吸等温曲线参数的分析
1
作者 秦传香 朱新生 《国外丝绸》 2002年第4期9-12,共4页
不同织物服装的卫生性和舒适感在很大程度上决定于纤维的吸湿性。纤维材料在加工、储藏和使用过程中,总是暴露于一定的湿度和温度环境中,由于许多纤维材料对湿度很敏感,因此在加工过程中它们的形状、尺寸会发生改变。另外制品的力学性... 不同织物服装的卫生性和舒适感在很大程度上决定于纤维的吸湿性。纤维材料在加工、储藏和使用过程中,总是暴露于一定的湿度和温度环境中,由于许多纤维材料对湿度很敏感,因此在加工过程中它们的形状、尺寸会发生改变。另外制品的力学性能也与纤维和纱线的吸湿率成函数关系。 展开更多
关键词 高吸湿纤维 吸附特性 吸附解吸等温曲线参数
下载PDF
垃圾填埋场衬垫土壤材料对Cr(Ⅵ)的吸附特性研究 被引量:3
2
作者 陆海军 栾茂田 +1 位作者 张金利 于永鲜 《岩土工程学报》 EI CAS CSCD 北大核心 2009年第7期1002-1008,共7页
通过静态平衡吸附试验对采用颗粒活性炭及酸活化膨润土改良的垃圾填埋场衬垫土壤材料吸附重金属的特性进行了观察。试验结果表明:研究中的所有土壤样本对Cr(Ⅵ)的吸附属于非线性的Langmuir模式。经颗粒活性炭及酸活化膨润土改良的衬垫... 通过静态平衡吸附试验对采用颗粒活性炭及酸活化膨润土改良的垃圾填埋场衬垫土壤材料吸附重金属的特性进行了观察。试验结果表明:研究中的所有土壤样本对Cr(Ⅵ)的吸附属于非线性的Langmuir模式。经颗粒活性炭及酸活化膨润土改良的衬垫土壤材料与天然黏土材料相比,对Cr(Ⅵ)的吸附强度有了很大的提高,说明颗粒活性炭和酸活化膨润土可以作为改良衬垫土壤的材料去吸附重金属。所有土壤样本对Cr(Ⅵ)的吸附量均随着温度的升高而增大,随着土壤固体颗粒浓度的增大而减小。Langmuir等温参数(qm,b)随着土壤固体颗粒浓度的增大而呈对数性减小,但随着土壤固体颗粒浓度进一步增大到某一临界值(例如200 g/L),其值基本稳定了,另外等温参数也随着温度的升高呈线性增大的趋势。由试验结果可以得出,采用较低的土壤固体颗粒浓度所确定的吸附参数值不适合模拟实际工程条件,其值将引起对垃圾填埋场衬垫的迟滞因子作出过高估计。因此,为了获得与实际工程条件比较接近的吸附参数值,静态平衡吸附试验必须在一个充分大的固体颗粒浓度条件下进行。 展开更多
关键词 垃圾填埋场衬垫 重金属 吸附等温参数 吸附
下载PDF
Removal of chromium (Ⅵ) from aqueous solutions using quaternized chitosan microspheres 被引量:5
3
作者 Chao Hua Runhu Zhang +2 位作者 Fang Bai Ping Lu Xiangfeng Liang 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2017年第2期153-158,共6页
In this study, quaternized chitosan microspheres (QCMS) were prepared and its Cr (VI) removal potential was investigated. Batch experiments were conducted to examine kinetics, adsorption isotherm, pH effect, and t... In this study, quaternized chitosan microspheres (QCMS) were prepared and its Cr (VI) removal potential was investigated. Batch experiments were conducted to examine kinetics, adsorption isotherm, pH effect, and thermodynamic parameters. Equilibrium was attained within 50 rain and maximum removal of 97.34% was achieved under the optimum conditions at pH 5. Adsorption data for Cr (VI) uptake by the QCMS were analyzed according to Langmuir, Freundlich, and Temkin adsorption models. The maximum uptake of Cr (VI) was 39.1 mg.g-a. Thermodynamic parameters for the adsorption system were determinated at 293 K, 303 K, 313 K and 323 K. (AH° = 16.08 kJ.mol- 1;AG° = -5.84 to -8.08 kJ.mo1-1 and AS° = 74.81 J.K-1 .tool-l). So the positive values of both A/-F and AS° suggest an endothermic reaction and increase in randomness at the solid-liquid interface during the adsorption. AG° values obtained were negative indicating a spontaneous adsorp- tion process. The kinetic process was described by a pseudo-second-order rate equation very well. The results of the present study indicated that the QCMS could he considered as a potential adsorbent for Cr (V1) in aqueous solutions. 展开更多
关键词 Chromium (V1)AdsorptionQ uatemized chitosan microspheresIsothermsThermodynamics
下载PDF
Adsorptive Thermodynamic Properties and Kinetics of trans-1,2-Cyclohexandiol onto AB-8 Resin 被引量:1
4
作者 谢艳新 侯丽丽 +1 位作者 杨倩 蒋登高 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2012年第2期277-283,共7页
AB-8 resin was used as an adsorbent for the removal of trans-1,2-cyclohexandiol(CHD) from aqueous solutions.Batch experiments were carried out to investigate the effect of contact time and temperature on sorption effi... AB-8 resin was used as an adsorbent for the removal of trans-1,2-cyclohexandiol(CHD) from aqueous solutions.Batch experiments were carried out to investigate the effect of contact time and temperature on sorption efficiency.The adsorptive thermodynamic properties and kinetics of CHD from water onto AB-8 resin were studied.The Langmuir and Freundlich isotherm models were employed to discuss the adsorption behavior.Thermodynamic parameters such as G,H and S were calculated.The results indicate that the equilibrium data are perfectly represented by Langmuir isotherm model.Thermodynamic study reveals that it is an exothermic process in nature and mainly physical adsorption enhanced by chemisorption with a decrease of entropy process.The kinetics of CHD adsorption is well described by the pseudo second-order model.The adsorbed CHD can be eluted from AB-8 resin by 5% ethanol aqueous solution with 100% elution percentage. 展开更多
关键词 AB-8 resin trans-1 2-cyclohexandiol ADSORPTION ISOTHERM THERMODYNAMICS KINETICS
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部