To solve the problem of excavation face dust control,the theory of dust removal after collection was put forward.Through a large number of theoretical and experimental researches,a new wind screen dust-collection syst...To solve the problem of excavation face dust control,the theory of dust removal after collection was put forward.Through a large number of theoretical and experimental researches,a new wind screen dust-collection system which was applied to comprehen- sive excavation face was developed.To set a wind dam in jet stream box,achieve the function of multi-stage and multiple-level regulation,lots of experimentation was carried out to obtain higher jet stream velocity with the minimum loss of energy.Experiments show that the slit width in the exports of wind screen dust-collection system should be 10 to 15 mm.For the general excavation roadway,after wind attenuation,the velocity can be greater than 3 m/s at the roof which meets the requirements of respirable dust control.展开更多
After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a h...After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a high percentage of respirable dust. Considering these factors, this paper improved the efficiency of dustfall by reducing the surface tension of the liquid used as a wetting agent, then configuring five kinds of wetting agents by adopting various doses and types of surfactants, neutral inorganic salts and chemical additives, etc. After purchasing DA-85 and SRJ-1 wetting agent, the surface tension and critical micelle concentration of seven kinds of wetting agents were measured using the capillary rise method. Wetting agent A was confirmed to have the best comprehensive effect. The experiments were optimized by measuring and comparatively analyzing contact angles of pure water, SRJ-1 wetting agent and wetting agent A on the surface of different coal samples using a contact angle measurement instrument （HARKE- SPCA）. By comparative analysis, dust-proof effects of seam, dynamic pressure water infusion and high- pressure spray in the tunneling face at the Daning coal mine using pure water, wetting agent SRJ-1 and A, it was determined that after using wetting agent A, the average dust concentration in the place of the mining machine driver, 10 m and 110 m away from the tunneling front is approximately 300 rag/ m^3, 240 mg/m^3 and 100 mg/m^3, respectively, This practice increased the dust-proof efficiency dramati- cally and achieved a good comprehensive dust-proof effect.展开更多
In order to understand the migration law of respirable dust and gain reasonable design parameters for dust control on a super-long double-shearer fully mechanized working face, this paper describes research carried ou...In order to understand the migration law of respirable dust and gain reasonable design parameters for dust control on a super-long double-shearer fully mechanized working face, this paper describes research carried out using a numerical simulation package(Fluent) based on gas-solid coupling dispersed multiphase flow model and field measurement to research different technology modes, dust distribution law at different intervals where shearers work in opposite directions on the lower 9303 face, No. 2 Jining Mine,Yankuang Coal Mining Co. Results show that the concentration of dust 3–6 m away from the shearers working in the same directions was large, while the impact area of respirable dust near the shearer increased significantly to 5–6 m with the distance between two shearers working in opposite directions.The concentration of dust on a double-shearer face was considerably higher than that of a face with one shear under the combined effect of wind speed on the face and disturbed wind around the shearer, while the dust concentration near the shearer on the return side was considerably higher than that on the inlet side. The concentration of dust on a double-shearer face along the airflow declined slowly so that dust was hard to control. Simulation results confirmed the results of field measurement, which could provide reference for dust prevention design.展开更多
基金the National Natural Science Foundation of China(f010206)
文摘To solve the problem of excavation face dust control,the theory of dust removal after collection was put forward.Through a large number of theoretical and experimental researches,a new wind screen dust-collection system which was applied to comprehen- sive excavation face was developed.To set a wind dam in jet stream box,achieve the function of multi-stage and multiple-level regulation,lots of experimentation was carried out to obtain higher jet stream velocity with the minimum loss of energy.Experiments show that the slit width in the exports of wind screen dust-collection system should be 10 to 15 mm.For the general excavation roadway,after wind attenuation,the velocity can be greater than 3 m/s at the roof which meets the requirements of respirable dust control.
基金partly supported by the National Natural Science Foundation of China (No.51404263)the National Natural Science Foundation of Jiangsu Province (No.BK20130203)+3 种基金the Coal Mine Joint Funds of the National Natural Science Foundation of China (No.51134023)the State Key Laboratory Cultivation Base for Gas Geology and Gas Control (No.WS2013A05)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)the independent study for State Key Laboratory of Coal Resources and Safe Mining,China University of Mining and Technology (No.SKLCRSM09X04)
文摘After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a high percentage of respirable dust. Considering these factors, this paper improved the efficiency of dustfall by reducing the surface tension of the liquid used as a wetting agent, then configuring five kinds of wetting agents by adopting various doses and types of surfactants, neutral inorganic salts and chemical additives, etc. After purchasing DA-85 and SRJ-1 wetting agent, the surface tension and critical micelle concentration of seven kinds of wetting agents were measured using the capillary rise method. Wetting agent A was confirmed to have the best comprehensive effect. The experiments were optimized by measuring and comparatively analyzing contact angles of pure water, SRJ-1 wetting agent and wetting agent A on the surface of different coal samples using a contact angle measurement instrument （HARKE- SPCA）. By comparative analysis, dust-proof effects of seam, dynamic pressure water infusion and high- pressure spray in the tunneling face at the Daning coal mine using pure water, wetting agent SRJ-1 and A, it was determined that after using wetting agent A, the average dust concentration in the place of the mining machine driver, 10 m and 110 m away from the tunneling front is approximately 300 rag/ m^3, 240 mg/m^3 and 100 mg/m^3, respectively, This practice increased the dust-proof efficiency dramati- cally and achieved a good comprehensive dust-proof effect.
基金the National Natural Science Foundation of China (No.51404249)the Basic Research Program of Jiangsu Province (No.BK20140201)the Priority Academic Program Development of Jiangsu Higher Education Institutions for financial support provided during this research
文摘In order to understand the migration law of respirable dust and gain reasonable design parameters for dust control on a super-long double-shearer fully mechanized working face, this paper describes research carried out using a numerical simulation package(Fluent) based on gas-solid coupling dispersed multiphase flow model and field measurement to research different technology modes, dust distribution law at different intervals where shearers work in opposite directions on the lower 9303 face, No. 2 Jining Mine,Yankuang Coal Mining Co. Results show that the concentration of dust 3–6 m away from the shearers working in the same directions was large, while the impact area of respirable dust near the shearer increased significantly to 5–6 m with the distance between two shearers working in opposite directions.The concentration of dust on a double-shearer face was considerably higher than that of a face with one shear under the combined effect of wind speed on the face and disturbed wind around the shearer, while the dust concentration near the shearer on the return side was considerably higher than that on the inlet side. The concentration of dust on a double-shearer face along the airflow declined slowly so that dust was hard to control. Simulation results confirmed the results of field measurement, which could provide reference for dust prevention design.
