A novel metallo-organic chemical vapor deposition (MOCVD) technique has been applied to the preparation of the photocatalytic titanium dioxide supported on activated carbon. The effects of various condition parameters...A novel metallo-organic chemical vapor deposition (MOCVD) technique has been applied to the preparation of the photocatalytic titanium dioxide supported on activated carbon. The effects of various condition parameters such as carrier gas flow rate, source temperature and deposition temperature on the deposition rate were investigated. The maximum deposition rate of 8.2 mg/(g.h) was obtained under conditions of carrier gas flow rate of 400 ml/min, source temperature of 423 K and deposition temperature of 913 K. The deposition rate followed Arrhenius behavior at temperature of 753 K to 913 K, corresponding to activation energy Ea of 51.09 kJ/mol. TiO2 existed only in anatase phase when the deposition temperature was 773 K to 973 K. With increase of deposition temperature from 1073 K to 1273 K, the rutile content sharply increased from 7% to 70%. It was found that a deposition temperature of 773 K and a higher source temperature of 448 K resulted in finely dispersed TiO2 particles, which were mainly in the range of 10-20 nm.展开更多
This paper analyzes the problem of testing for parameters change in ARCH errors models with deterministic trend based on residual cusum test. It is shown that the asymptotically limiting distribution of the residual c...This paper analyzes the problem of testing for parameters change in ARCH errors models with deterministic trend based on residual cusum test. It is shown that the asymptotically limiting distribution of the residual cusum test statistic is still the sup of a standard Brownian bridge under null hypothesis. In order to check this, we carry out a Monte Carlo simulation and examine the return of IBM data. The results from both simulation and real data analysis support our claim. We also can explain this phenomenon from a theoretical viewpoint that the variance in ARCH model in mainly determined by its parameters.展开更多
文摘A novel metallo-organic chemical vapor deposition (MOCVD) technique has been applied to the preparation of the photocatalytic titanium dioxide supported on activated carbon. The effects of various condition parameters such as carrier gas flow rate, source temperature and deposition temperature on the deposition rate were investigated. The maximum deposition rate of 8.2 mg/(g.h) was obtained under conditions of carrier gas flow rate of 400 ml/min, source temperature of 423 K and deposition temperature of 913 K. The deposition rate followed Arrhenius behavior at temperature of 753 K to 913 K, corresponding to activation energy Ea of 51.09 kJ/mol. TiO2 existed only in anatase phase when the deposition temperature was 773 K to 973 K. With increase of deposition temperature from 1073 K to 1273 K, the rutile content sharply increased from 7% to 70%. It was found that a deposition temperature of 773 K and a higher source temperature of 448 K resulted in finely dispersed TiO2 particles, which were mainly in the range of 10-20 nm.
基金the National Natural Science Foundation of China (Nos.60375003 60972150)the Science and Technology Innovation Foundation of Northwestern Polytechnical University (No.2007KJ01033)
文摘This paper analyzes the problem of testing for parameters change in ARCH errors models with deterministic trend based on residual cusum test. It is shown that the asymptotically limiting distribution of the residual cusum test statistic is still the sup of a standard Brownian bridge under null hypothesis. In order to check this, we carry out a Monte Carlo simulation and examine the return of IBM data. The results from both simulation and real data analysis support our claim. We also can explain this phenomenon from a theoretical viewpoint that the variance in ARCH model in mainly determined by its parameters.
