基于正交试验的大学校园室外风环境优化设计——以河北工程大学为例

利用数值模拟技术分析室外风环境状况,以正交试验为研究方法,探讨建筑布局、建筑长度、建筑间距等多因素对室外风环境的影响。通过试验得到的13组试验组合,以平均风速与平均空气龄为风环境的评价指标,利用Design Expert对风环境影响因素进行响应面分析,再根据分析结果确定最优的试验组合。研究表明行列式布局、建筑长度70 m及建筑间距25 m是最优组合,能够有效改善校园风环境现状。

Analysis of the Effects of Slope Geometry on the Dynamic Response of a Near-field Mountain from the Wenchuan Earthquake

Fourier spectra and acceleration response spectra of near-field acceleration records of the 2008 Wenchuan Earthquake have been calculated.Relative fundamental frequencies(or predominant periods) were characterized.Then,the natural frequencies of a range of slopes with different geometric characteristics,such as height,slope ratio,and pattern,were analyzed.The seismic responses of the slopes were compared,and the variability of seismic response with the above geometric elements was found.Results show that if slope height increases,and provided that other conditions are unchanged,the natural frequency of the first mode of a doublesurface slope will change as a power law.However,natural frequencies will diminish(based on a parabolic function) as the slope angle becomes large.Both the surface pattern and the number of surfaces on a slope can have a great impact on the seismic response of the slope.Moreover,within a certain range of slope heights or angles,either height or angle will also greatly influence the variability of the seismic response.The results of this research will be helpful to understanding seismic dynamic response features and explaining the ways that slope stability can be affected by earthquakes.

Effects of zinc on static and dynamic mechanical properties of copper-zinc alloy

The effects of adding alloy element zinc on the static and dynamic mechanical properties of copper-zinc alloy were investigated. Tensile and low cycle fatigue behaviors of the C11000 copper and H63 copper-zinc alloy were obtained by using a miniature tester that combined the functions of in situ tensile and fatigue testing. A piezoelectric actuator was adopted as the actuator for the fatigue testing, and the feasibility of the fatigue actuator was verified by the transient harmonic response analysis based on static tensile preload and dynamic sinusoidal load. The experimental results show that the yield strength and tensile strength of the C11000 copper are improved after adding 37%(mass fraction) zinc, and H63 copper-zinc alloy presents more obvious cyclic hardening behavior and more consumed irreversible plastic work during each stress cycle compared with C11000 copper for the same strain controlled cycling. Additionally, based on the Manson-Coffin theory, the strain-life equations of the two materials were also obtained. C11000 copper and H63 copper-zinc alloy show transition life of 16832 and 1788 cycles, respectively.

Optimization of electrical discharge machining process parameters for Al6061/cenosphere composite using grey-based hybrid approach

Fly ash has congregated considerable attention as a potential reinforcement for aluminum matrix composites(AMCs)to enhance selective properties and reduce the cost of fabrication.However,poor machinability of such AMCs limits their application.The present study focuses on the preparation of cenosphere fly ash reinforced Al6061alloys by compo casting method.X-ray diffraction analysis of the prepared AMCs exposes the presence of cenosphere particles without any formation of other intermetallic compounds.In this study,electrical discharge machining(EDM)was engaged to examine the machinability of the prepared metal matrix composite(MMCs).The measured performance characteristics for the various combinations of input process parameters were considered to be MRR,EWR and SR.Face centered central composite design(CCD)of response surface method(RSM)was employed to design the number of experimental trials required and a hybrid approach of grey-based response surface methodology(GRSM)was imposed for predicting the optimal combination of processing parameter in EDM process.Generous improvement was observed in the performance characteristics obtained by employing both the optimal setting of machining parameters.The optical3D surface profile graphs of the ED machined surface also revealed the improvement in surface quality and texture employing the optimal processing conditions proposed by hybrid GRSM approach.

Uncertainty in projections of the South Asian summer monsoon under global warming by CMIP6 models:Role of tropospheric meridional thermal contrast

Driven by the increase in CO_(2)concentration,climate models reach a consensus that the large-scale circulation of the South Asian summer monsoon(SASM) becomes weakened but with different magnitudes.This study investigates the major uncertainty sources of the SASM response to an abrupt quadrupling of CO_(2)(abrupt-4×CO_(2))in 18 models of phase 6 of the Coupled Model Intercomparison Project.The projected weakening of the SASM indicated by both zonal and meridional monsoon circulation indices is closely linked to decreases in the meridional gradient of upper-tropospheric temperature between Eurasia and the Indian Ocean(EUTT-IUTT).A climate feedback-response analysis method is applied to linearly decompose the uncertainty of changes in EUTT-IUTT into the partial changes due to external forcing and internal processes of the earth-atmosphere column.Results show that the uncertainty of changes in EUTT-IUTT is contributed positively by the dominant atmospheric dynamic process,followed by the cloud shortwave radiative effect,and negatively by the surface latent heat flux and cloud longwave radiative effect.Contributions from CO_(2)forcing and other internal processes including albedo and water vapor feedbacks,oceanic heat storage,and sensible heat flux are found to be minor.

Study on Extraction and Conversion Annatto （Bixa orellana L.） Color into Norbixin to Prepare Food Grade Water-Soluble Norbixin Powder

Response surface methodology was used in this research to optimize the technical parameters of the extraction and conversion color compound in armatto seeds into norbixin. Parameters affected the extraction efficiency and norbixin recovery yield were solvent concentration, rate of solvent/seed, incubation time, and incubation temperature. The optimization results including： concentration of ethanol is 51.82°; concentration of NaOH is 0.52 M; ratio of solvent/seed is 7.1/1; incubation time is 33.12 minutes, incubation temperature is 58.6℃, and the rate of 36% HCl/color solution is 0.5/5 （v/v）.