In this paper, a running cost is cheap from the thing used for harmless peening treatment to the environment, health which an influence is rare in toward processing material like heat being only water fundamentally, a...In this paper, a running cost is cheap from the thing used for harmless peening treatment to the environment, health which an influence is rare in toward processing material like heat being only water fundamentally, and economical, and the characteristics is hard to get are given. There is some research about the residual stress improvement by water-jet peening during the high-speed water. In this study, a big bubble cloud ceremony water-jet peening which dissolves the problem of the form of the applicable thing by exposing the whole of the applicable thing in the big bubble cloud as the way of dealing with peening efficiently in a short time is proposed by this research. Moreover, the uniform compression residual stress is added around the surface of the processing side, and connected with the remarkable improvement of the fatigue strength of the part. Furthermore, and safety processing is very possible, and it thinks about the thing which has possible high practical use, and writers to get rid of the problems of the way of processing it with peening until now. Water-jet peening was given by this research during high-speed water with big bubble cloud-type water toward tooth gear manufactured by SCr420H3 V2 to open the effect of water-jet peening during the high-speed water. A change was measured at the time as the sutra of the residual stress on the surface of the test settlement by the X-ray method, and the validity of this law was verified.展开更多
Analytical examination was made to ascertain the effect of the high pressure water flow on the fabric properties.Polyester/cotton blended cambric was spurted by high pressure water flow. Fabric properties such as hand...Analytical examination was made to ascertain the effect of the high pressure water flow on the fabric properties.Polyester/cotton blended cambric was spurted by high pressure water flow. Fabric properties such as handle,thickness, tensile strength , stiffness and air permeability after the water treatment were investigated.展开更多
The existence of liquid water was found very important in incineration flue gas clean-up systems for enhancing the absorption of acid components contained. In a newly developed incineration flue gas clean-up tower, wh...The existence of liquid water was found very important in incineration flue gas clean-up systems for enhancing the absorption of acid components contained. In a newly developed incineration flue gas clean-up tower, which works in a semi-dry mode, the water is injected in the form of spray to maximum its contact surface with the gas. The criteria for the design of the water nozzles would be nigh water concentration but no liquid impinging on the solid wall and complete evaporation inside the tower. In order to optimize the atomizer design, the effects of the spray type (hollow or solid cone), their initial droplet she distribution and water flow rate on the performance of the acid gas absorption were investigated. The liquid behaviour was studied with a fluid dynamic simulation code, and the overall performance was checked experimentally. This paper presents the use of a commercial CFD code, FLUENT, and some modifications made during such investigation. The modification includes the viscosity of the flue gas defined as a function of the temperature, and the initial mass fraction of different droplet size group described with an exponential distribution formula of Rosin-Rammler. The investigation results (the optimal spray parameters) were used to guide the water nozzle design. The general performance of the flue gas clean-up system measured during the plant operation complied with the design criteria.展开更多
基金high technology research center of Saitama Institute of Technology
文摘In this paper, a running cost is cheap from the thing used for harmless peening treatment to the environment, health which an influence is rare in toward processing material like heat being only water fundamentally, and economical, and the characteristics is hard to get are given. There is some research about the residual stress improvement by water-jet peening during the high-speed water. In this study, a big bubble cloud ceremony water-jet peening which dissolves the problem of the form of the applicable thing by exposing the whole of the applicable thing in the big bubble cloud as the way of dealing with peening efficiently in a short time is proposed by this research. Moreover, the uniform compression residual stress is added around the surface of the processing side, and connected with the remarkable improvement of the fatigue strength of the part. Furthermore, and safety processing is very possible, and it thinks about the thing which has possible high practical use, and writers to get rid of the problems of the way of processing it with peening until now. Water-jet peening was given by this research during high-speed water with big bubble cloud-type water toward tooth gear manufactured by SCr420H3 V2 to open the effect of water-jet peening during the high-speed water. A change was measured at the time as the sutra of the residual stress on the surface of the test settlement by the X-ray method, and the validity of this law was verified.
文摘Analytical examination was made to ascertain the effect of the high pressure water flow on the fabric properties.Polyester/cotton blended cambric was spurted by high pressure water flow. Fabric properties such as handle,thickness, tensile strength , stiffness and air permeability after the water treatment were investigated.
文摘The existence of liquid water was found very important in incineration flue gas clean-up systems for enhancing the absorption of acid components contained. In a newly developed incineration flue gas clean-up tower, which works in a semi-dry mode, the water is injected in the form of spray to maximum its contact surface with the gas. The criteria for the design of the water nozzles would be nigh water concentration but no liquid impinging on the solid wall and complete evaporation inside the tower. In order to optimize the atomizer design, the effects of the spray type (hollow or solid cone), their initial droplet she distribution and water flow rate on the performance of the acid gas absorption were investigated. The liquid behaviour was studied with a fluid dynamic simulation code, and the overall performance was checked experimentally. This paper presents the use of a commercial CFD code, FLUENT, and some modifications made during such investigation. The modification includes the viscosity of the flue gas defined as a function of the temperature, and the initial mass fraction of different droplet size group described with an exponential distribution formula of Rosin-Rammler. The investigation results (the optimal spray parameters) were used to guide the water nozzle design. The general performance of the flue gas clean-up system measured during the plant operation complied with the design criteria.
