Almost without exception literature data and modeling effort are understandably devoted to water as the sprayed liquid since it constitutes the most common liquid used in spray drying applications. In selected applica...Almost without exception literature data and modeling effort are understandably devoted to water as the sprayed liquid since it constitutes the most common liquid used in spray drying applications. In selected applications, however, the liquid making up the solution or suspension may not be water. The objective of this work is to examine the differences in flow patterns, thermal behavior and drying rates caused by different liquids having different thermo-physical properties spray into a spray dryer using a computational fluid dynamic model.Numerical experiments were carried out for water (base case), ethyl alcohol and isopropyl alcohol-the latter two as model non-aqueous liquids. The chamber geometry was cylinder type with a co-current axial pressure nozzle and also an axial central exit so that the configuration is two dimensional and axi-symmetric. It is shown that the liquid properties can have major influence on the thermal field, droplet trajectories, residence times and overall evaporation capacity when all parameters of the problem are held fixed. Deviations from the single phase turbulent airflow in the same chamber without spray are different for the three liquids examined.展开更多
Bench-scale soil column experiments were carried out to evaluate the effectiveness of Cr（VI） bioremediation process in soils by using indigenous bacteria with the addition of bacteria nutrient media. Effects of part...Bench-scale soil column experiments were carried out to evaluate the effectiveness of Cr（VI） bioremediation process in soils by using indigenous bacteria with the addition of bacteria nutrient media. Effects of particle size, spray intensity, initial Cr（VI） concentration, circulation mode and soil depth on Cr（VI） remediation were studied. Results show that soils after 6 d remediation with spray intensity controlled in the range of 29.6-59.2 mL/min could well fulfill the requirement of concrete aggregate and roadbed material usage, for the leaching toxicity concentration of the Cr（VI） in treated soils under the chosen condition is far less than 5 mg/L The leaching toxicity and fractions of both hexavalent chromium and trivalent chromium from remediated soils were determined and compared with that of untreated soil. The results show that water soluble Cr（VI） declines from 1520.54 mg/kg to 0.68 mg/kg, exchangeable Cr（VI） decreases from 34.83 mg/kg to 0.01 mg/kg and carbonates-bonded Cr（V1） falls from 13.55 mg/kg to 0.68 mg/kg. Meanwhile, a corresponding increase in carbonate-bonded Cr（III）, Fe and Mn oxides-bonded Cr（III） and organic matter-bonded Cr（III） are found. It reveals that indigenous bacteria can leach out water soluble Cr（VI）, exchangeable Cr（VI） and carbonates-bonded Cr（VI） from contaminated soil followed by converting into carbonate-bonded Cr（III）, Fe and Mn oxides-bonded Cr（IlI）, organic matter-bonded Cr（III） and residual Cr（III）.展开更多
In a gas turbine engine combustor, highly swiding combustion is usually adopted to stabilize flame and reduce pollutant emissions. Swirl cup, as an air blast atomizer, is widely used to provide a uniform presentation ...In a gas turbine engine combustor, highly swiding combustion is usually adopted to stabilize flame and reduce pollutant emissions. Swirl cup, as an air blast atomizer, is widely used to provide a uniform presentation of fuel droplets to the combustor dome. This paper investigated the effect of secondary swirler on the flow field down- stream of the swirl cup using particle image velocimetry （PIV）. Three swirl cups＇ non-reacting flow field were studied： case A, B and C with secondary swirler vane angle 53°, 60° and 68° respectively. Detailed mean and transient velocities and vorticity in the center plane were obtained. From the PIV results, a sharp contrast flow field was obtained for case A to other two cases due to the lower secondary swirling intensity. The recirculation zone is collapsed in disorder for the case A. Ignition tests of the three cups were completed in a single cup com- bustor. In general, the ignition performance increases with the increasing of the secondary swirling intensity. For case A, the ignition performance is very unstable and has much randomness and there is no clear lean ignition boundary can be generated. This work can further understand the swirl behavior and ignition mechanism.展开更多
文摘Almost without exception literature data and modeling effort are understandably devoted to water as the sprayed liquid since it constitutes the most common liquid used in spray drying applications. In selected applications, however, the liquid making up the solution or suspension may not be water. The objective of this work is to examine the differences in flow patterns, thermal behavior and drying rates caused by different liquids having different thermo-physical properties spray into a spray dryer using a computational fluid dynamic model.Numerical experiments were carried out for water (base case), ethyl alcohol and isopropyl alcohol-the latter two as model non-aqueous liquids. The chamber geometry was cylinder type with a co-current axial pressure nozzle and also an axial central exit so that the configuration is two dimensional and axi-symmetric. It is shown that the liquid properties can have major influence on the thermal field, droplet trajectories, residence times and overall evaporation capacity when all parameters of the problem are held fixed. Deviations from the single phase turbulent airflow in the same chamber without spray are different for the three liquids examined.
基金Project(50925417) supported by the National Funds for Distinguished Young Scientist, ChinaProject(50830301) supported by the Key Program of National Natural Science Foundation of ChinaProject(51074191) supported by the National Natural Science Foundation of China
文摘Bench-scale soil column experiments were carried out to evaluate the effectiveness of Cr（VI） bioremediation process in soils by using indigenous bacteria with the addition of bacteria nutrient media. Effects of particle size, spray intensity, initial Cr（VI） concentration, circulation mode and soil depth on Cr（VI） remediation were studied. Results show that soils after 6 d remediation with spray intensity controlled in the range of 29.6-59.2 mL/min could well fulfill the requirement of concrete aggregate and roadbed material usage, for the leaching toxicity concentration of the Cr（VI） in treated soils under the chosen condition is far less than 5 mg/L The leaching toxicity and fractions of both hexavalent chromium and trivalent chromium from remediated soils were determined and compared with that of untreated soil. The results show that water soluble Cr（VI） declines from 1520.54 mg/kg to 0.68 mg/kg, exchangeable Cr（VI） decreases from 34.83 mg/kg to 0.01 mg/kg and carbonates-bonded Cr（V1） falls from 13.55 mg/kg to 0.68 mg/kg. Meanwhile, a corresponding increase in carbonate-bonded Cr（III）, Fe and Mn oxides-bonded Cr（III） and organic matter-bonded Cr（III） are found. It reveals that indigenous bacteria can leach out water soluble Cr（VI）, exchangeable Cr（VI） and carbonates-bonded Cr（VI） from contaminated soil followed by converting into carbonate-bonded Cr（III）, Fe and Mn oxides-bonded Cr（IlI）, organic matter-bonded Cr（III） and residual Cr（III）.
文摘In a gas turbine engine combustor, highly swiding combustion is usually adopted to stabilize flame and reduce pollutant emissions. Swirl cup, as an air blast atomizer, is widely used to provide a uniform presentation of fuel droplets to the combustor dome. This paper investigated the effect of secondary swirler on the flow field down- stream of the swirl cup using particle image velocimetry （PIV）. Three swirl cups＇ non-reacting flow field were studied： case A, B and C with secondary swirler vane angle 53°, 60° and 68° respectively. Detailed mean and transient velocities and vorticity in the center plane were obtained. From the PIV results, a sharp contrast flow field was obtained for case A to other two cases due to the lower secondary swirling intensity. The recirculation zone is collapsed in disorder for the case A. Ignition tests of the three cups were completed in a single cup com- bustor. In general, the ignition performance increases with the increasing of the secondary swirling intensity. For case A, the ignition performance is very unstable and has much randomness and there is no clear lean ignition boundary can be generated. This work can further understand the swirl behavior and ignition mechanism.
