环境噪声学进展

本文简要地回顾了30年来中国环境噪声学的发展，并从飞机噪声、地面运输噪声、环境噪声影响与评价以及工业噪声控制四个方面介绍了近年来环境噪声学的进展。

机械振动噪声综合性实验课的革新

在将两门具有内在联系的课程内容整合成一门课程的基础上,针对性地对课程实验进行了革新。新实验满足了两方面对实验的基本要求,不仅注重基础理论知识的综合应用能力的培养,同时还注重学生创新精神的培养。新实验施行表明,学生的兴趣和主动性显著提高,实验的成效明显改善。

电机噪声污染及其防治措施

本文介绍了噪声学的基础理论、电机噪音的主要来源,测试技术及降低电机噪音的措施,并阐述了防治噪音污染的可行性和重要意义。

制冷机组噪声有效控制技术的应用

制冷机组噪声有效控制技术的应用泰安市环境监测站亓培珍，王新１引言随着旅游业的迅猛发展，占据城市繁华位置的宾馆、商场、娱乐场所安装空调制冷设备的日益增多。因地理位置所限，这些制冷设备又往往与居民区较近，制冷设备机组高频带的噪声已成为环境公害。本文以泰安...

建筑环境声学的前沿领域

建筑环境声学研究的目的在于维护良好的人居声环境,关怀人们的听觉感受,使人们能够欣赏音乐和其他美好的声音,摒除或降低噪声与振动干扰;良好的声环境对于保障人们的健康,提升生产力及工作效率以及利于人们的思维和学习都是一个重要的前提.系统地介绍了建筑环境声学及其3个分支学科———厅堂声学、噪声控制学及声景学的研究范围、研究内容和研究现状,提出了建筑环境声学目前值得重视的若干前沿热点研究课题,同时介绍了笔者及所带领的团队在若干热点问题上所取得的研究成果.

Galvanic corrosion behavior of copper/titanium galvanic couple in artificial seawater

The corrosion behaviors of copper and copper/titanium galvanic couple （GC） in seawater were studied by electrochemical impedance spectroscopy （EIS） and electrochemical noise （EN） techniques in conjunction with scanning electron microscopy （SEM） method. The results show that the corrosion process of copper in seawater can be divided into two stages, in which corrosion resistance and SE show the same evolution trend of initial increase and subsequent decrease, while SG changes oppositely. However, the ensemble corrosion process of copper/titanium GC in seawater includes three stages, in which corrosion resistance and SE show the evolution features of initial decrease with a subsequently increase, and the final decrease again;while SG changes oppositely. The potential difference between copper and titanium in their galvanic couple can accelerate the initiation of pitting corrosion of copper, and both the minimum and maximum corrosion potentials of copper/titanium GC are much more positive than those of pure copper.

Characterization of pitting corrosion of 7A60 aluminum alloy by EN and EIS techniques

The pitting corrosion behaviors of 7A60 aluminum alloy in the retrogression and re-aging （RRA） temper were investigated by electrochemical impedance spectroscopy （EIS） and electrochemical noise （EN） techniques, and the microstructure and the second phase content of the alloy were observed and determined by scanning electron microscopy （SEM） and energy dispersive spectrometer （EDS）. The results show that there exist two different corrosion stages for 7A60 alloy in 3.5%NaCl solution, and the corrosion process can be detected by the appearance of EIS spectrum with two capacitive time constants and the wavelet fractal dimension D extracted from EN. SEM and EDS results also demonstrate that severe pitting corrosion in 7A60 alloy is mainly caused by electrochemical active MgZn2 particles, secondly by Al2MgCu and Mg2Si. Al7Cu2Fe particles make little contribution to the pitting corrosion of 7A60 alloy.

三层复合聚丙烯静音排水管道系统的研究

塑料排水管道在房屋建筑中得到了广泛应用,尤其是聚氯乙烯(PVC-U)排水管道,由于价格便宜、施工方便,占据了建筑排水的主要市场,同时聚氯乙烯(PVC-U)管道排水噪声大也是大家普遍关注的问题。对三层复合聚丙烯静音排水管道系统进行研究分析。从管材与管件的加工性能考虑,降噪声学材料的填料用量75%作为优选。管件采用降噪声学材料与耐冲击共聚聚丙烯(PP-B)材料用量之比6∶4作为优选。三层复合聚丙烯静音排水管道系统各项技术性能均符合CJ/T 273—2012《聚丙烯静音排水管材及管件》标准规定要求,是PVC排水管的升级换代产品。

Whisper intelligibility enhancement based on noise robust feature and SVM

A machine learning based speech enhancement method is proposed to improve the intelligibility of whispered speech. A binary mask estimated by a two-class support vector machine （SVM） classifier is used to synthesize the enhanced whisper. A novel noise robust feature called Gammatone feature cosine coefficients （GFCCs） extracted by an auditory periphery model is derived and used for the binary mask estimation. The intelligibility performance of the proposed method is evaluated and compared with the traditional speech enhancement methods. Objective and subjective evaluation results indicate that the proposed method can effectively improve the intelligibility of whispered speech which is contaminated by noise. Compared with the power subtract algorithm and the log-MMSE algorithm, both of which do not improve the intelligibility in lower signal-to-noise ratio （SNR） environments, the proposed method has good performance in improving the intelligibility of noisy whisper. Additionally, the intelligibility of the enhanced whispered speech using the proposed method also outperforms that of the corresponding unprocessed noisy whispered speech.

Study of engine noise based on independent component analysis

Independent component analysis was applied to analyze the acoustic signals from diesel engine. First the basic prin-ciple of independent component analysis (ICA) was reviewed. Diesel engine acoustic signal was decomposed into several inde-pendent components (ICs); Fourier transform and continuous wavelet transform (CWT) were applied to analyze the independent components. Different noise sources of the diesel engine were separated, based on the characteristics of different component in time-frequency domain.

Contrasting initial events of localized corrosion on surfaces of 2219-T42 and 6061-T6 aluminum alloys exposed in Caribbean seawater

Aluminum alloy samples, 6061-T6 and 2219-T42, were exposed to Caribbean seawater for 90 d. The fluctuations of open circuit potential, considered as electrochemical noise (EN), were used to characterize and compare initial pitting events, which appeared on their surfaces. EN analysis was carried out using the power spectral density (PSD) vs frequency. The decrease of the β exponent in PSD graphs indicated a release of spontaneous energy with the progress of pit formation in seawater. The fluctuations were associated with the breakdown and formation of new corrosion layers. The values of β exponent in PSD graphs suggest that corrosion process of AA2219-T42 alloy occurs as a persistent non-stationary process, the dynamics of which is controlled by fractional Brownian motion (fBm), while on AA6061-T6 alloy the corrosion process was dominated by stationary and weakly persistent features, with the contribution of fractional Gaussian noise (fGn). After the exposure in seawater, SEM-EDX analysis revealed insoluble intermetallic particles on the alloys, rich in Cu or Fe and irregularly distributed. The preferential dissolution of Mg and Al occurs from the S-phase (Al2CuMg) of AA2219-T42 alloy.

Online evaluation of electroless deposition rate by electrochemical noise method

Continuous noise resistance calculation(CNRC)technique was used for online determination of the electroless nickel deposition rate on zirconium pretreated magnesium alloy.For this purpose,the noise resistance(R_n) variation with time was calculated for the pretreated alloy surface in the electroless plating solution.The CNRC results were described by energy dispersive X-ray spectroscopy(EDS)and scanning electron microscopy(SEM)techniques.Also,potentiodynamic polarization and gravimetric measurements were used for determination of the electroless deposition rate at the same time period and the results were compared with the CNRC results.The Rn variation with plating time shows that the electroless plating consists of different stages with various deposition rates.The results of the CNRC and polarization methods were not in acceptable agreement due to the limitations of the polarization method for online monitoring of the deposition rate.However,the results of the gravimetric measurements were in complete agreement with the CNRC technique and so,the CNRC can be considered as suitable tool for online evaluation of the electroless deposition rate.

Prediction of Hydrodynamic Noise of Open Cavity Flow

In this paper,the hydrodynamically generated noise by the flow over an open cavity is studied.First,aeroacoustic theories and computational aeroacoustic(CAA) methodologies are reviewed in light of hydrodynamic acoustics,based on which,a hybrid method is presented.In the coupling procedure,the unsteady cavity flow field is computed using large-eddy simulation(LES) ,while the radiated sound is calculated by the Ffowcs Williams-Hawkings(FW-H) acoustic analogy with acoustic source terms extracted from the time-dependent solutions of the unsteady flow.The hybrid LES-FW-H acoustic analogy method is tested with an open cavity flow at Mach number of 0.006 and Reynolds number of 105 .Following the reflection theorem of Powell,the contributions from different source terms are quantified,and the terms involving wall-pressure fluctuations are found to account for most of the radiated intensity.The radiation field is investigated in the frequency domain.For the longitudinal direction,the sound propagates with a dominant radiation downstream the cavity in the near-field and a flatter directivity in the far-field,while for the spanwise direction,the acoustic waves have a similar propagation along+z and-z directions,with no visible directivity.

Characterization of stress corrosion crack growth of 304 stainless steel by electrochemical noise and scanning Kelvin probe

The fatigue pre-cracking 304 stainless steel （SS） specimens with lengths of 1.002 mm （L-crack） and 0.575 mm （S-crack） were prepared. Their corrosion behavior was studied by electrochemical noise （EN） in 4 mol/L NaC1 ＋ 0.01 mol/L Na2S203 solution under slow-strain-rate-testing （SSRT） conditions. Moreover, the characteristics of L-crack＇s surface morphology and potential distribution with scanning Kelvin probe （SKP） before and after SSRT were also discussed. Compared with S-crack, L-crack is propagated and the features of crack propagation can be obtained. After propagation, the noise amplitudes increase with increasing stress and accelerating corrosion, the white noises at low and high frequencies （WE and WH） of the later stage are one order of magnitude larger than that at early stage in the current power spectral densities （PSDs）. The potential PSDs also increase, but WH disappears. In addition, the crack propagation can be demonstrated according to variation of probability distribution, surface morphology and potential distribution.

Shot noise analysis on corrosion behavior of zinc alloy (ZnAl4Cul) under dry-wet cycles

The corrosion behaviors of zinc alloy （ZnAl4Cul） in 3.5% （mass fraction） NaCl, 7.3% （mass fraction） Na2SO4 and simulated acid rain solutions were investigated using electrochemical measurements. The potential noise during dry-wet cycle was monitored and analyzed by fast Fourier transform （FFT）, fast wavelet transform （FWT）, shot noise theory and stochastic theory. Cumulative probability curves of event frequency fn indicate that the corrosion events in the dry cycles are greater than those in the wet cycles. Uniform corrosion was observed in the NaCl solution compared with more localized corrosion in the Na2SO4 solution, which is evidenced by FWT and SEM. Conditional events generation rate r（t） for diffusion controlled reactions decreases with increasing the time. r（t） values for uniform corrosion and diffusion controlled process are the largest in the wet cycle in 3.5% NaCl solution. The values of r（t） for pitting corrosion in Na2SO4 solution are observed to become large during spraying periods, and r（t） for pitting corrosion has the largest value in the Na2SO4 solution. The intergranular corrosion of zinc is serious in simulated acid rain solution.

Handling Label Noise in Air Traffic Complexity Evaluation Based on Confident Learning and XGBoost

Air traffic complexity is a critical indicator for air traffic operation,and plays an important role in air traffic management(ATM),such as airspace reconfiguration,air traffic flow management and allocation of air traffic controllers(ATCos).Recently,many machine learning techniques have been used to evaluate air traffic complexity by constructing a mapping from complexity related factors to air traffic complexity labels.However,the low quality of complexity labels,which is named as label noise,has often been neglected and caused unsatisfactory performance in air traffic complexity evaluation.This paper aims at label noise in air traffic complexity samples,and proposes a confident learning and XGBoost-based approach to evaluate air traffic complexity under label noise.The confident learning process is applied to filter out noisy samples with various label probability distributions,and XGBoost is used to train a robust and high-performance air traffic complexity evaluation model on the different label noise filtered ratio datasets.Experiments are carried out on a real dataset from the Guangzhou airspace sector in China,and the results prove that the appropriate label noise removal strategy and XGBoost algorithm can effectively mitigate the label noise problem and achieve better performance in air traffic complexity evaluation.

Virtual design and performance prediction of a silencing air cleaner used in an I.C.engine intake system

This paper reports results of the authors’ studies on the virtual design method used in the development of low noise intake system of I.C. engine. The resulting high pass-by noise at level above the legislative target at full throttle when engine speed was around 5200 r/min necessitated a BEM-aided redesign task, following the typical process of design and development of an intake system. During the initial design, based on the acoustic theory and the requirements (1. The air flux of the redesigned should equal to or exceed the value of the original flux; 2. The filtering area must not be degraded), and considering the constraint of space in the engine compartment, total volume and rough internal dimensions were determined. During the detailed design, the exact internal dimensions of the air cleaner were determined, and an effective method was applied to improve the acoustic performance at low frequency. The predicted sound power of the intake system indicated that the objective of reducing the overall engine noise by minimizing intake system noise was achieved.

Active and passive behaviors of gold in cyanide solutions

Active and passive behaviors of pure gold（Au） and roasted gold ore（RGO） electrodes were investigated at 25 °C in de-aerated agitated cyanide media.Cyclic voltammetry and potentiodynamic polarization with agitation at 100 r/min in 0.04 mol/L NaCN solution showed different peak positions and current densities.Potentiodynamic tests illustrate that the peak current densities increase greatly with increasing the cyanide concentration.Increasing the pH value from 10 to 11 resultes in a great decrease of current density,while it increases noticeably by decreasing the agitation from 100 to 60 r/min.In the presence of oxygen,Au and RGO electrodes show different characteristics of peak positions and corrosion rates.The potentiostatic studies show that increasing the potential from 1 to 1.4 V at pH value of 11 results in an 80% decrease of current density while decreasing the pH value from 11 to 10 at 1 V gives a 1.7 fold increase of current density,possibly due to more effective passive layer.Following polarization,electrochemical noise measurements（ENM） during decay periods show that Au results in more passive states at high potentials,showing pitting corrosion.The ENM results show that this technique can be a promising tool for a better understanding of gold leaching.The XPS studies prove the presence of passive oxides.

Portable 4-Channel Electrochemical Noise Test System

A portable 4-channel electrochemical noise(EN) test system with high precision was developed.The modular instrument cRIO was used as its core and the signal conditioning module included zero resistance ammeter(ZRA),fly line,screening box and shielded wire.The EN data were acquired from two Q235 carbon steel specimens placed in 0.5 mol/L H2SO4 solution and 0.1 mol/L NaCl solution.The experimental result shows that this system can achieve an accuracy of 10 pA and 10 μV,and it can be applied to on-site multi-channel EN test.