A series of europium（Ⅲ） complexes of 2-thienyltrifluoroacetonate （HTTA）, terephthalic acid （TPA） and phenanthroline （Phen） were synthesized. The new complexes Eu（TPA）（TTA）Phen and EUE（TPA）（TTA）4Phen2 ...A series of europium（Ⅲ） complexes of 2-thienyltrifluoroacetonate （HTTA）, terephthalic acid （TPA） and phenanthroline （Phen） were synthesized. The new complexes Eu（TPA）（TTA）Phen and EUE（TPA）（TTA）4Phen2 were characterized by elemental analysis, IR spectrum, scanning electron microscope and thermal stability analysis. The results show that the thermal stability of the Eu（Ⅲ） complexes increases in the following order： the mononuclear complex Eu（TTA）3Phen, the binuclear complex EUE（TPA）（TTA）4Phen2, the chain polynuclear complex Eu（TPA）（TTA）Phen. And the formation of the binuclear/polynuclear structure of the new complexes appears to be responsible for the enhancement of their thermal and optical stability. In addition, The fluorescence excitation spectra of these new complexes show more broad excitation bands than that of the complex Eu（TTA）3Phen corresponding to their formation. The enhancement of Eu^3＋ fluorescence in the new complexes can be observed by the addition of Gd^3＋. The bright red luminescent plastics can be obtained when the complex EuGd（TPA）（TTA）4Phen2 is added above 0.5% （mass fraction）.展开更多
Homogeneous oxidation using an oil-soluble oxidant, tert-amyl hydroperoxide （TAHP）, for ultra-deep desulfurization was performed under mild conditions in the presence of molybdenum oxide catalysts. Dibenzothio- phe...Homogeneous oxidation using an oil-soluble oxidant, tert-amyl hydroperoxide （TAHP）, for ultra-deep desulfurization was performed under mild conditions in the presence of molybdenum oxide catalysts. Dibenzothio- phene （DBT）, benzothiophene （BT） and 4, 6-dimethyl-dibenzothiophene （DMDBT）, which are the refractory sulfur compounds for hydrodesulfurization （HDS）, were employed as model substrates for a simulated diesel fuel. Activity of molybdenum oxide supported on a macroporous weak acidic resin was investigated. The mass conversion of DBT reached near 100% at 90℃ and a TAHP/DBT molar ratio of 3 with 1% of molybdenum oxide supported on Amberlite IRC-748 resin for 1 h. It was further found that the activities of the model substrates decreased in the or- der of DMDBT 〉DBT 〉BT. In the flow oxidation using TAHP as the oxidant, mass conversion of DBT increased remarkably from 61.3% to 98.5% when dropping the weight hourly space velocity （WHSV） from 40 h^-1 to 10 h^-1. A series of experiments dealt with selectivity of this oxidation using TAHP revealed that the model unsaturated compounds, i.e. 4, 6, 8-trimethyl-2-nonylene, and 2-methylnaphthalene did not affect the oxidation of DBT. Carbazole had nearly no effect on the conversion of DBT using TAHP, but had some influence on the one using tert-butyl hydroperoxide （TBHP）. The mass conversion of DBT decreased remarkably from 75.2% to 3.6% when the content of carbazole increased from 0 to 500μg·g^-1. In the flow oxidation using TAHP as the oxidant, the concentration of DBT in model fuels was reduced from 500 μg·g^-1 to 7.2 μg·g^-1 at WHSV of 10 h^-1, and then reduced to 3.8 μg·g^-1 by adsorntion of Al2O3.展开更多
Organic solar cells （OSCs） is a new generation of solar cells have emerged as an alternative to conventional Si-based solar cells owing to their advantages of low cost, ease of fabrication and their potential for th...Organic solar cells （OSCs） is a new generation of solar cells have emerged as an alternative to conventional Si-based solar cells owing to their advantages of low cost, ease of fabrication and their potential for the manufacture of flexible and large area solar cells. So we chose that part to beginning study of the material and all parameters effects in environmental condition because the solar cell working in environment. In this study the fabrication of poly（3-hexylthiophene） （P3HT） and [6,6]-phenyl C61-butyric acid methyl ester （PCBM） blend flexible thin film using spin coating was reported. Process parameters like solvent, electron donor to acceptor ratio, concentration and temperature were also studied. We used solvent systems to make active layer of P3HT：PCBM composite and PEDOT：PSS as a buffer layer. Highest absorption was obtained for the flexible thin film made with 1：1 and 1：0.75 ratio of P3HT to PCBM. Chloroform solvent in 40 gm/ml concentration at 90 ~C was the optimum conditions to make flexible device.展开更多
Eight novel lanthanide complexes： {Ln（TDA）I.5（H20）2 },, （Ln = Pr（la）, Nd（2a）） and { Ln（TDA）（Ac）（H2O）}n （Ln = Pr（1）, Nd（2） Eu（3）, Gd（4）, Tb（5）, Dy（6）; TDA = Thiophene-2,5-dicarboxylic acid...Eight novel lanthanide complexes： {Ln（TDA）I.5（H20）2 },, （Ln = Pr（la）, Nd（2a）） and { Ln（TDA）（Ac）（H2O）}n （Ln = Pr（1）, Nd（2） Eu（3）, Gd（4）, Tb（5）, Dy（6）; TDA = Thiophene-2,5-dicarboxylic acid anion） have been constructed by hydrothermal reaction. Structural analyses reveal that complexes Ia and 2a belong to the space group C2/c, exhibiting three-dimensional （3D） frame- works. Complexes 1-6 with P2t/c space group were prepared in the presence of excessive ammonium acetate, giving rise to interesting 3D frameworks different from those of la and 2a. Magnetic property studies of 4-6 reveal the weak antiferromag- netic interaction exists between adjacent Gd3＋ in 4. The complex 6 displays rather rare slow magnetization relaxation behavior in 3D frameworks.展开更多
基金Project(20576142) supported by the National Natural Science Foundation of China Project (05B075) supported by the Foundation of Hunan Provincial Education Department for Young Scholars
文摘A series of europium（Ⅲ） complexes of 2-thienyltrifluoroacetonate （HTTA）, terephthalic acid （TPA） and phenanthroline （Phen） were synthesized. The new complexes Eu（TPA）（TTA）Phen and EUE（TPA）（TTA）4Phen2 were characterized by elemental analysis, IR spectrum, scanning electron microscope and thermal stability analysis. The results show that the thermal stability of the Eu（Ⅲ） complexes increases in the following order： the mononuclear complex Eu（TTA）3Phen, the binuclear complex EUE（TPA）（TTA）4Phen2, the chain polynuclear complex Eu（TPA）（TTA）Phen. And the formation of the binuclear/polynuclear structure of the new complexes appears to be responsible for the enhancement of their thermal and optical stability. In addition, The fluorescence excitation spectra of these new complexes show more broad excitation bands than that of the complex Eu（TTA）3Phen corresponding to their formation. The enhancement of Eu^3＋ fluorescence in the new complexes can be observed by the addition of Gd^3＋. The bright red luminescent plastics can be obtained when the complex EuGd（TPA）（TTA）4Phen2 is added above 0.5% （mass fraction）.
基金Supported by Program for Changjiang Scholars and Innovative Research Team in University
文摘Homogeneous oxidation using an oil-soluble oxidant, tert-amyl hydroperoxide （TAHP）, for ultra-deep desulfurization was performed under mild conditions in the presence of molybdenum oxide catalysts. Dibenzothio- phene （DBT）, benzothiophene （BT） and 4, 6-dimethyl-dibenzothiophene （DMDBT）, which are the refractory sulfur compounds for hydrodesulfurization （HDS）, were employed as model substrates for a simulated diesel fuel. Activity of molybdenum oxide supported on a macroporous weak acidic resin was investigated. The mass conversion of DBT reached near 100% at 90℃ and a TAHP/DBT molar ratio of 3 with 1% of molybdenum oxide supported on Amberlite IRC-748 resin for 1 h. It was further found that the activities of the model substrates decreased in the or- der of DMDBT 〉DBT 〉BT. In the flow oxidation using TAHP as the oxidant, mass conversion of DBT increased remarkably from 61.3% to 98.5% when dropping the weight hourly space velocity （WHSV） from 40 h^-1 to 10 h^-1. A series of experiments dealt with selectivity of this oxidation using TAHP revealed that the model unsaturated compounds, i.e. 4, 6, 8-trimethyl-2-nonylene, and 2-methylnaphthalene did not affect the oxidation of DBT. Carbazole had nearly no effect on the conversion of DBT using TAHP, but had some influence on the one using tert-butyl hydroperoxide （TBHP）. The mass conversion of DBT decreased remarkably from 75.2% to 3.6% when the content of carbazole increased from 0 to 500μg·g^-1. In the flow oxidation using TAHP as the oxidant, the concentration of DBT in model fuels was reduced from 500 μg·g^-1 to 7.2 μg·g^-1 at WHSV of 10 h^-1, and then reduced to 3.8 μg·g^-1 by adsorntion of Al2O3.
文摘Organic solar cells （OSCs） is a new generation of solar cells have emerged as an alternative to conventional Si-based solar cells owing to their advantages of low cost, ease of fabrication and their potential for the manufacture of flexible and large area solar cells. So we chose that part to beginning study of the material and all parameters effects in environmental condition because the solar cell working in environment. In this study the fabrication of poly（3-hexylthiophene） （P3HT） and [6,6]-phenyl C61-butyric acid methyl ester （PCBM） blend flexible thin film using spin coating was reported. Process parameters like solvent, electron donor to acceptor ratio, concentration and temperature were also studied. We used solvent systems to make active layer of P3HT：PCBM composite and PEDOT：PSS as a buffer layer. Highest absorption was obtained for the flexible thin film made with 1：1 and 1：0.75 ratio of P3HT to PCBM. Chloroform solvent in 40 gm/ml concentration at 90 ~C was the optimum conditions to make flexible device.
基金supported by the National Natural Science Foundation of China (20971074, 91122004)Foundation for the Authors of Natural Excellent Doctoral Dissertation of China (200732)+1 种基金the Natural Science Foundation of Tianjin (10JCZDJC21700)the "100 Projects" of Creative Research for the Undergraduates of Nankai University
文摘Eight novel lanthanide complexes： {Ln（TDA）I.5（H20）2 },, （Ln = Pr（la）, Nd（2a）） and { Ln（TDA）（Ac）（H2O）}n （Ln = Pr（1）, Nd（2） Eu（3）, Gd（4）, Tb（5）, Dy（6）; TDA = Thiophene-2,5-dicarboxylic acid anion） have been constructed by hydrothermal reaction. Structural analyses reveal that complexes Ia and 2a belong to the space group C2/c, exhibiting three-dimensional （3D） frame- works. Complexes 1-6 with P2t/c space group were prepared in the presence of excessive ammonium acetate, giving rise to interesting 3D frameworks different from those of la and 2a. Magnetic property studies of 4-6 reveal the weak antiferromag- netic interaction exists between adjacent Gd3＋ in 4. The complex 6 displays rather rare slow magnetization relaxation behavior in 3D frameworks.
