The deformation characteristic in the forming process of aluminum alloy 7075 cross valve under multi-way loading was investigated by numerical simulation method. The results indicate that there exist 4 deformation pat...The deformation characteristic in the forming process of aluminum alloy 7075 cross valve under multi-way loading was investigated by numerical simulation method. The results indicate that there exist 4 deformation patterns in the multi-way loading forming process of cross valve, such as forward extrusion, backward extrusion, forward-lateral extrusion and backward-lateral extrusion; one or several patterns occur at different forming stages depending on loading path. In general, the main deformation pattern is forward extrusion or backward extrusion at the initial stage; the main deformation pattern is backward extrusion at the intermediate stage, and the backward extrusion and forward-lateral extrusion occur at the final stage. In order to improve the cavity fill and reduce the forming defects, the lateral extrusion deformation should be increased at the initial and intermediate stages, and the forward extrusion deformation at the final forging stage should be reduced or avoided.展开更多
Local mesh refinement is one of the key steps in the implementations of adaptive finite element methods. This paper presents a parallel algorithm for distributed memory parallel computers for adaptive local refinement...Local mesh refinement is one of the key steps in the implementations of adaptive finite element methods. This paper presents a parallel algorithm for distributed memory parallel computers for adaptive local refinement of tetrahedral meshes using bisection. This algorithm is used in PHG, Parallel Hierarchical Grid Chttp：//lsec. cc. ac. cn/phg/）, a toolbox under active development for parallel adaptive finite element solutions of partial differential equations. The algorithm proposed is characterized by allowing simukaneous refinement of submeshes to arbitrary levels before synchronization between submeshes and without the need of a central coordinator process for managing new vertices. Using the concept of canonical refinement, a simple proof of the independence of the resulting mesh on the mesh partitioning is given, which is useful in better understanding the behaviour of the biseetioning refinement procedure.展开更多
A numerical study based on the finite volume method has been performed to study the three-dimension natural convection in a parallelogrammic top side opened cavity filled nanofluid with partially heated square at the ...A numerical study based on the finite volume method has been performed to study the three-dimension natural convection in a parallelogrammic top side opened cavity filled nanofluid with partially heated square at the bottom side.Results are obtained for different governing parameters such as nanoparticle concentration (φ) from 0 to 0.05,inclination angle of the back and front walls (α) from 5° to 75°,Rayleigh number from 10^3 to 10^5,and length of heater changer from 0.1 to 1.The main finding from the obtained result showed that the inclination angle and nanoparticle volume fraction affect the flow structure and enhance the heat transfer.展开更多
We present a detailed theoretical study on the acoustic band structure of two-dimensional （2D） phononic crystal. The 2D pho- nonic crystal with parallelogram lattice structure is considered to be formed by rigid sol...We present a detailed theoretical study on the acoustic band structure of two-dimensional （2D） phononic crystal. The 2D pho- nonic crystal with parallelogram lattice structure is considered to be formed by rigid solid rods embedded in air. For the circu- lar rods, some of the extrema of the acoustic bands appear in the usual high-symmetry points and, in contrast, we find that some of them are located in other specific lines. For the case of elliptic rods, our results indicate that it is necessary to study the whole first Brillouin zone to obtain rightly the band structure and corresponding band gaps. Furthermore, we evaluate the first and second band gaps using the plane wave expansion method and find that these gaps can be tuned by adjusting the side lengths ratio R, inclined angle 0 and filling fraction F of the parallelogram lattice with circular rods. The results show that the largest value of the first band gap appears at θ=90° and F--0.7854. In contrast, the largest value of the second band gap is at θ=60° and F=0.9068. Our results indicate that the improvement of matching degree between scatterers and lattice pattern, ra- ther than the reduction of structural symmetry, is mainly responsible for the enhancement of the band gaps in the 2D phononic crystal.展开更多
基金Project(2011ZX04016-081)supported by the National Science and Technology Major Project of China
文摘The deformation characteristic in the forming process of aluminum alloy 7075 cross valve under multi-way loading was investigated by numerical simulation method. The results indicate that there exist 4 deformation patterns in the multi-way loading forming process of cross valve, such as forward extrusion, backward extrusion, forward-lateral extrusion and backward-lateral extrusion; one or several patterns occur at different forming stages depending on loading path. In general, the main deformation pattern is forward extrusion or backward extrusion at the initial stage; the main deformation pattern is backward extrusion at the intermediate stage, and the backward extrusion and forward-lateral extrusion occur at the final stage. In order to improve the cavity fill and reduce the forming defects, the lateral extrusion deformation should be increased at the initial and intermediate stages, and the forward extrusion deformation at the final forging stage should be reduced or avoided.
基金supported by the 973 Program of China 2005CB321702China NSF 10531080.
文摘Local mesh refinement is one of the key steps in the implementations of adaptive finite element methods. This paper presents a parallel algorithm for distributed memory parallel computers for adaptive local refinement of tetrahedral meshes using bisection. This algorithm is used in PHG, Parallel Hierarchical Grid Chttp：//lsec. cc. ac. cn/phg/）, a toolbox under active development for parallel adaptive finite element solutions of partial differential equations. The algorithm proposed is characterized by allowing simukaneous refinement of submeshes to arbitrary levels before synchronization between submeshes and without the need of a central coordinator process for managing new vertices. Using the concept of canonical refinement, a simple proof of the independence of the resulting mesh on the mesh partitioning is given, which is useful in better understanding the behaviour of the biseetioning refinement procedure.
文摘A numerical study based on the finite volume method has been performed to study the three-dimension natural convection in a parallelogrammic top side opened cavity filled nanofluid with partially heated square at the bottom side.Results are obtained for different governing parameters such as nanoparticle concentration (φ) from 0 to 0.05,inclination angle of the back and front walls (α) from 5° to 75°,Rayleigh number from 10^3 to 10^5,and length of heater changer from 0.1 to 1.The main finding from the obtained result showed that the inclination angle and nanoparticle volume fraction affect the flow structure and enhance the heat transfer.
基金supported by the National Natural Science Foundation of China(Grant No.10974206)
文摘We present a detailed theoretical study on the acoustic band structure of two-dimensional （2D） phononic crystal. The 2D pho- nonic crystal with parallelogram lattice structure is considered to be formed by rigid solid rods embedded in air. For the circu- lar rods, some of the extrema of the acoustic bands appear in the usual high-symmetry points and, in contrast, we find that some of them are located in other specific lines. For the case of elliptic rods, our results indicate that it is necessary to study the whole first Brillouin zone to obtain rightly the band structure and corresponding band gaps. Furthermore, we evaluate the first and second band gaps using the plane wave expansion method and find that these gaps can be tuned by adjusting the side lengths ratio R, inclined angle 0 and filling fraction F of the parallelogram lattice with circular rods. The results show that the largest value of the first band gap appears at θ=90° and F--0.7854. In contrast, the largest value of the second band gap is at θ=60° and F=0.9068. Our results indicate that the improvement of matching degree between scatterers and lattice pattern, ra- ther than the reduction of structural symmetry, is mainly responsible for the enhancement of the band gaps in the 2D phononic crystal.
