The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and ...The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and under the stress of 140-210 MPa for 16 h.Based on these experimental data,material constitutive equations which can well characterize creep aging behaviors of the tested alloy were developed.The effect of interior stress distributed along the sheet thickness on springback was simulated using FE software MSC.MARC by compiling the established constitutive models into the user subroutine.The simulation results showed that the amount of sheet springback was 61.12% when merely considering tensile stress existing along the sheet thickness;while sheet springback was up to 65.93% when taking both tensile and compressive stresses into account.In addition,an AA2524 rectangular sheet was subjected to CAF experiment in resistance furnace.The springback value of the formed rectangular sheet was 68.2%,which was much closer to 65.93%.This confirms that both tensile and compressive stresses across the sheet thickness should be considered in accurately predicting springback of the sheet after forming,which can be more consistent with experimental results.展开更多
The dynamic theory of die swell deduced in a previous paper was extensively applied to study the extrudate swelling behaviors of two entangled polymeric liquids （HDPE and PBD） in a simple shear flow at steady shear ...The dynamic theory of die swell deduced in a previous paper was extensively applied to study the extrudate swelling behaviors of two entangled polymeric liquids （HDPE and PBD） in a simple shear flow at steady shear stress. The mechanism and dynamics for the recoils and the recoveries of viscoelastic strains in the extrudate were investigated under the free recovery and dynamic states. It was found that in the course of recovery the free recoil and the growth of die swell in the extrudate may be divided into two recovery regions （instantaneous and delayed regions） and three growth stages （instantaneous, delayed, and ultimate extrudate swelling stages）. The free recoil and the extrudate swelling behaviors may be expressed as a function of shear stress. The correlations of instantaneous, delayed, total and ultimate extrudate swell effects to the molecular parameters and the operational variables in the simple shear flow at steady shear stress were derived from the dynamic theory of die swell. Also, two sets of new universal equations on the total extrudate swelling effect （TESE） and ultimate extrudate swelling effect （UESE） were deduced. The first is the universal equation of the logarithmic correlation between the TESE and the growth time under the free and dynamic states; the second is the universal equation of the logarithmic correlation between the UESE and the operational variables under the free and equilibrium states. The first equation was verified by experimental data of PBD with different molecular weights at different operational variables. The second equation was verified by experimental data of HDPE at two temperatures and different operational variables. An excellent agreement result was obtained. The excellent agreement shows that the two universal equations can be used directly to predict the correlations of the TESE and UESE to the growth time, the molecular parameters, and the operational variables under the dynamic and equilibrium states.展开更多
基金Project(2014CB046602)supported by the National Basic Research Program of ChinaProject(20120162110003)supported by Ph D Programs Foundation of Ministry of Education of China
文摘The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and under the stress of 140-210 MPa for 16 h.Based on these experimental data,material constitutive equations which can well characterize creep aging behaviors of the tested alloy were developed.The effect of interior stress distributed along the sheet thickness on springback was simulated using FE software MSC.MARC by compiling the established constitutive models into the user subroutine.The simulation results showed that the amount of sheet springback was 61.12% when merely considering tensile stress existing along the sheet thickness;while sheet springback was up to 65.93% when taking both tensile and compressive stresses into account.In addition,an AA2524 rectangular sheet was subjected to CAF experiment in resistance furnace.The springback value of the formed rectangular sheet was 68.2%,which was much closer to 65.93%.This confirms that both tensile and compressive stresses across the sheet thickness should be considered in accurately predicting springback of the sheet after forming,which can be more consistent with experimental results.
文摘The dynamic theory of die swell deduced in a previous paper was extensively applied to study the extrudate swelling behaviors of two entangled polymeric liquids （HDPE and PBD） in a simple shear flow at steady shear stress. The mechanism and dynamics for the recoils and the recoveries of viscoelastic strains in the extrudate were investigated under the free recovery and dynamic states. It was found that in the course of recovery the free recoil and the growth of die swell in the extrudate may be divided into two recovery regions （instantaneous and delayed regions） and three growth stages （instantaneous, delayed, and ultimate extrudate swelling stages）. The free recoil and the extrudate swelling behaviors may be expressed as a function of shear stress. The correlations of instantaneous, delayed, total and ultimate extrudate swell effects to the molecular parameters and the operational variables in the simple shear flow at steady shear stress were derived from the dynamic theory of die swell. Also, two sets of new universal equations on the total extrudate swelling effect （TESE） and ultimate extrudate swelling effect （UESE） were deduced. The first is the universal equation of the logarithmic correlation between the TESE and the growth time under the free and dynamic states; the second is the universal equation of the logarithmic correlation between the UESE and the operational variables under the free and equilibrium states. The first equation was verified by experimental data of PBD with different molecular weights at different operational variables. The second equation was verified by experimental data of HDPE at two temperatures and different operational variables. An excellent agreement result was obtained. The excellent agreement shows that the two universal equations can be used directly to predict the correlations of the TESE and UESE to the growth time, the molecular parameters, and the operational variables under the dynamic and equilibrium states.
