期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
包装件回弹的理论分析 被引量:1
1
作者 向红 汤伯森 《包装工程》 CAS CSCD 北大核心 2001年第2期43-45,53,共4页
对包装件的回弹进行了系统的理论分析 ,得出了包装产品和包装箱回弹时的加速度时间函数、回弹高度 。
关键词 缓冲包装 包装件 缓冲设计 包装箱 加速度时间函数 回弹高度
下载PDF
体操助跳板弹性系数实验研究
2
作者 杨冬 朱曹奇 +6 位作者 杨江湃 金仁操 叶欢欢 钱雯 呼格吉乐 王辉 周彩丽 《科技资讯》 2012年第9期220-220,共1页
对于助跳板国家标准对助跳板是否符合体操器械规定进行测量。本文详细介绍测量助跳板的方法和原理。
关键词 体操助跳板 变形量 回弹高度 软板 硬板
下载PDF
微型板-板连接器结构的仿真分析 被引量:1
3
作者 刘绪磊 周德俭 黄春跃 《机电元件》 2008年第3期9-15,共7页
利用有限元分析软件ANSYS建立了SEL系列微型板-板连接器的试验有限元模型,以连接器簧片的加载压缩和卸载回弹过程为研究对象,分析了簧片完全压缩后的接触法向力及卸载回弹后的回弹高度,与SAMTEC公司的试验数据对比,误差都不超过10%,验... 利用有限元分析软件ANSYS建立了SEL系列微型板-板连接器的试验有限元模型,以连接器簧片的加载压缩和卸载回弹过程为研究对象,分析了簧片完全压缩后的接触法向力及卸载回弹后的回弹高度,与SAMTEC公司的试验数据对比,误差都不超过10%,验证了所建立的簧片有限元模型的可靠性;然后根据实际应用,建立了应用有限元模型并进行仿真分析,分析结果表明:在实际应用中,连接器簧片会产生比试验时更大的塑性变形,回弹高度为0.45 mm,低于试验模型时的回弹高度0.565 mm;最后根据仿真结果进行预测可知,至少要在上PCB板上施加62N的压力才能保证SEL连接器正常工作。 展开更多
关键词 接触压力 有限元仿真 板-板连接器 回弹高度
下载PDF
压装装药双向压药的模具设计 被引量:11
4
作者 姜庆禄 《兵工自动化》 2013年第1期93-96,共4页
为了解决弹药装药中压装药柱的密度不均匀的问题,提出一种在单向压机上实现双向压药模具的设计方法。从单向压机压制药柱双向压药模具的总体设计方案、双向压药垫块及模体的设计方法、使用的原材料和热处理要求等出发,通过分析影响轴向... 为了解决弹药装药中压装药柱的密度不均匀的问题,提出一种在单向压机上实现双向压药模具的设计方法。从单向压机压制药柱双向压药模具的总体设计方案、双向压药垫块及模体的设计方法、使用的原材料和热处理要求等出发,通过分析影响轴向压力降的各种原因,得到药柱的密度分布,并找到了取得密度均匀和平均密度大的药柱的方法。结果表明:该方法能取得密度均匀和平均密度大的药柱,解决了压装工艺中常见的问题。 展开更多
关键词 双向压药垫块 高度尺寸 径向尺寸 配合间隙的确定
下载PDF
Research on spring-back behavior of high strength steel sheets
5
作者 Zhang Junping Fang Gang +1 位作者 Ma Mingtu Jin Qingsheng 《Engineering Sciences》 EI 2014年第5期54-58,共5页
To investigate the spring-back behavior of dual-phase (DP) steel, V-shape spring-back experiments with different bending angles, relative bending radii and blank holding forces were carried out in this paper. It is ... To investigate the spring-back behavior of dual-phase (DP) steel, V-shape spring-back experiments with different bending angles, relative bending radii and blank holding forces were carried out in this paper. It is concluded that with the increase of V-shape angle or blank holding force, the spring-back of DP steel sheets decreases; while raising fiIlet radius of punch, which has the most apparent effects on spring-back, advances spring-back angle. Among DP590, DP780 and DP980, higher strength yields more notable spring-back due to larger elastic deformation. The difference of spring-back among these materials is relevant with the microstructure and mechanical properties. The total elastic deformation approximately equals the ratio of the strength corresponding to the applied load to the modulus of elasticity. 展开更多
关键词 SPRING-BACK V-shape bending blank holding force relative bending radius
下载PDF
Transparent,stretchable and anti-freezing hybrid double-network organohydrogels 被引量:3
6
作者 Liwei Zhu Jing Xu +4 位作者 Jianchun Song Minglin Qin Shijia Gu Wei Sun Zhengwei You 《Science China Materials》 SCIE EI CAS CSCD 2022年第8期2207-2216,共10页
Stretchable ionic conductors with high transparency and excellent resilience are highly desired for flexible electronics,but traditional ionic conductive hydrogels are easy to dry and freeze.Herein,a newly hybrid cros... Stretchable ionic conductors with high transparency and excellent resilience are highly desired for flexible electronics,but traditional ionic conductive hydrogels are easy to dry and freeze.Herein,a newly hybrid crosslinking strategy is presented for preparing a stretchable and transparent hydrogel by using sodium alginate(SA)and acrylamide based on the unique physically and covalently hybrid crosslinking mechanism,which is transformed into organohydrogel by simple solvent replacement.Due to the combination of hybrid crosslinking double network and hydrogen bond interactions introduced by the glycerin-water binary solvent,the SA-poly(acrylamide)-organohydrogel(SPOH)demonstrates excellent anti-freezing(-20℃)property,stability(>2 days),transparency,stretchability(~1600%)and high ionic conductivity(17.1 mS cm^(-1)).Thus,a triboelectric nanogenerator made from SPOH(O-TENG)shows an instantaneous peak power density of 262 mW m^(-2)at a load resistance of 10 MΩand efficiently harvests biomechanical energy to drive an electronic watch and light-emitting diode.Moreover,The O-TENG exhibits favorable long-term stability(2 weeks)and temperature tolerance(-20℃).In addition,the raw materials can be prepared into SPOH fibers by a simple tubular mold method,exhibiting high transparency,which can be used for laser transmission.The various abilities of the SPOH promise the application of energy harvesting and laser transmission for wearable electronics and biomedical field. 展开更多
关键词 double network GLYCERIN organohydrogel antifreezing triboelectric nanogenerator
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部