This study focused on developing a risk assessment method for explosion at a coal reclaim tunnel （CRT） facility. The method was developed based on an analytical hierarchy process （AHP）, which is an expert system t...This study focused on developing a risk assessment method for explosion at a coal reclaim tunnel （CRT） facility. The method was developed based on an analytical hierarchy process （AHP）, which is an expert system that quantifies the factors of explosion incidents, based on events and hierarchies. In this paper, the proposed model was modification from original AHP model, specifically modifying the structure from ＂alternative＇s results＂ to ＂total risk-rating＇s results＂. The total risk-rating is obtained by summing up risk-rating of each factor, where the risk-rating is a multiplication product of the risk value by the AHP weighted value. To support decision-making using the expert system, data on the real conditions of the CRT were collected and analyzed. A physical modeling of the CRT with laboratory-scale experiments was carried out to show the impact of a ventilation system in CRT on diluting the methane gas and coal dust, in order to support the quantification of AHP risk value. The criteria to evaluate the risk of explosion was constructed from six components that are： fuel, oxygen, ignition, confinement, dispersion, and monitoring system. Those components had fifty-two factors that serve as sub-components （root causes）. The main causes of explosion in CRT were found to be： mechanical ventilation failure and abnormal ventilation, breakdown of monitoring system, and coal spontaneous-combustion. Assessments of two CRT facilities at Mine A and Mine B were carried out as a case study in order to check the reliability of the developed AHP method. The results showed that the risk rating of Mine A was classified as high and Mine B was classified as medium, which is in a good agreement with the site conditions.展开更多
Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recover...Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recovery ventilator and to investigate the effect of the air supply arrangement. Three types of mixing ventilation are chosen for the analysis of coupling ANSYS/FLUENT （a computational fluid dynamics （CFD） program） with TRNSYS （a building energy simulation （BES） software）. The adoption of mutual complementary boundary conditions for CFD and BES provides more accurate and complete information of indoor air distribution and thermal performance in buildings. A typical office-space situated in a middle storey is chosen for the analysis. The office-space is equipped with air-conditioners on the ceiling. A heat recovery ventilation system directly supplies flesh air to the office space. Its thermal performance and indoor air distribution predicted by the coupled method are compared under three types of ventilation system. When the supply and return openings for ventilation are arranged on the ceiling, there is no critical difference between the predictions of the coupled method and BES on the energy consumption of HVAC because PID control is adopted for the supply air temperature of the occupied zone. On the other hand, approximately 21% discrepancy for the heat recovery estimation in the maximum between the simulated results of coupled method and BES-only can be obviously found in the floor air supply ventilation case. The discrepancy emphasizes the necessity of coupling CFD with BES when vertical air temperature gradient exists. Our future target is to estimate the optimum design of heat recovery ventilation system to control CO2 concentration by adjusting flow rate of flesh air.展开更多
As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to ...As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to improve flotation performance of fine and ultrafine particles, there is still much more to be done. In this paper, the effects of nano-microbubbles （nanobuhbles and microbubbles） on the flotation of fine （-38 ＋ 14.36 μm） and ultrafine （-14.36 ＋ 5μm） chalcopyrite particles were investigated in a laboratory scale Denver flotation cell. Nano-microbubbles were generated using a specially-designed nano- microbubble generator based on the cavitation phenomenon in Venturi tubes. In order to better under- stand the mechanisms of nano-microbubble enhanced froth flotation of fine and ultrafine chalcopyrite particles, the nano-microbubble size distribution, stability and the effect of frother concentration on nano- bubble size were also studied by a laser diffraction method. Comparative flotation tests were performed in the presence and absence of nano-microbubbles to evaluate their impact on the fine and ultrafine chalcopyrite particle flotation recovery. According to the results, the mean size of nano-microbubbles increased over time, and decreased with increase of frother concentration. The laboratory-scale flotation test results indicated that flotation recovery of chalcopyrite fine and ultrafine particles increased by approximately 16-21% in the presence of nano-microbubbles, depending on operating conditions of the process. The presence of nano-microbubbles increased the recovery of ultrafine particles （-14.36 ＋ 5 μm） more than that of fine particles （-38 ＋ 14.36 μm）. Another major advantage is that the use of nano-microbubbles reduced the collector and frother consumptions by up to 75% and 50%, respectively.展开更多
With the rising of IGCC and the second generation PFBC-CC, and with the development of tech-nology of staged combustion to lower emission of NOx, the desulfurization efficiency under reducingatmosphere is raised. In t...With the rising of IGCC and the second generation PFBC-CC, and with the development of tech-nology of staged combustion to lower emission of NOx, the desulfurization efficiency under reducingatmosphere is raised. In this paper, with the application of the fly-ash recycle and tworstage combus-tion technologies in a fluidized bed combustor, the desulfurization test under reducing atmosphere isdescribed. Meanwllile, ammonia injection test was also conducted. Results show that desulfurizationunder reducing atmosphere has higher efficiency, and ammonia injection denitrification effect is veryperfect.展开更多
文摘This study focused on developing a risk assessment method for explosion at a coal reclaim tunnel （CRT） facility. The method was developed based on an analytical hierarchy process （AHP）, which is an expert system that quantifies the factors of explosion incidents, based on events and hierarchies. In this paper, the proposed model was modification from original AHP model, specifically modifying the structure from ＂alternative＇s results＂ to ＂total risk-rating＇s results＂. The total risk-rating is obtained by summing up risk-rating of each factor, where the risk-rating is a multiplication product of the risk value by the AHP weighted value. To support decision-making using the expert system, data on the real conditions of the CRT were collected and analyzed. A physical modeling of the CRT with laboratory-scale experiments was carried out to show the impact of a ventilation system in CRT on diluting the methane gas and coal dust, in order to support the quantification of AHP risk value. The criteria to evaluate the risk of explosion was constructed from six components that are： fuel, oxygen, ignition, confinement, dispersion, and monitoring system. Those components had fifty-two factors that serve as sub-components （root causes）. The main causes of explosion in CRT were found to be： mechanical ventilation failure and abnormal ventilation, breakdown of monitoring system, and coal spontaneous-combustion. Assessments of two CRT facilities at Mine A and Mine B were carried out as a case study in order to check the reliability of the developed AHP method. The results showed that the risk rating of Mine A was classified as high and Mine B was classified as medium, which is in a good agreement with the site conditions.
基金Project supported by Grant-in-Aid for Scientific Research (JSPS KAKENHI for Young Scientists (S), 21676005)
文摘Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recovery ventilator and to investigate the effect of the air supply arrangement. Three types of mixing ventilation are chosen for the analysis of coupling ANSYS/FLUENT （a computational fluid dynamics （CFD） program） with TRNSYS （a building energy simulation （BES） software）. The adoption of mutual complementary boundary conditions for CFD and BES provides more accurate and complete information of indoor air distribution and thermal performance in buildings. A typical office-space situated in a middle storey is chosen for the analysis. The office-space is equipped with air-conditioners on the ceiling. A heat recovery ventilation system directly supplies flesh air to the office space. Its thermal performance and indoor air distribution predicted by the coupled method are compared under three types of ventilation system. When the supply and return openings for ventilation are arranged on the ceiling, there is no critical difference between the predictions of the coupled method and BES on the energy consumption of HVAC because PID control is adopted for the supply air temperature of the occupied zone. On the other hand, approximately 21% discrepancy for the heat recovery estimation in the maximum between the simulated results of coupled method and BES-only can be obviously found in the floor air supply ventilation case. The discrepancy emphasizes the necessity of coupling CFD with BES when vertical air temperature gradient exists. Our future target is to estimate the optimum design of heat recovery ventilation system to control CO2 concentration by adjusting flow rate of flesh air.
基金the Tarbiat Modares University (TMU), the Iran Mineral Processing Research Center (IMPRC) and the IMIDRO for the technical assistance and financial support
文摘As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to improve flotation performance of fine and ultrafine particles, there is still much more to be done. In this paper, the effects of nano-microbubbles （nanobuhbles and microbubbles） on the flotation of fine （-38 ＋ 14.36 μm） and ultrafine （-14.36 ＋ 5μm） chalcopyrite particles were investigated in a laboratory scale Denver flotation cell. Nano-microbubbles were generated using a specially-designed nano- microbubble generator based on the cavitation phenomenon in Venturi tubes. In order to better under- stand the mechanisms of nano-microbubble enhanced froth flotation of fine and ultrafine chalcopyrite particles, the nano-microbubble size distribution, stability and the effect of frother concentration on nano- bubble size were also studied by a laser diffraction method. Comparative flotation tests were performed in the presence and absence of nano-microbubbles to evaluate their impact on the fine and ultrafine chalcopyrite particle flotation recovery. According to the results, the mean size of nano-microbubbles increased over time, and decreased with increase of frother concentration. The laboratory-scale flotation test results indicated that flotation recovery of chalcopyrite fine and ultrafine particles increased by approximately 16-21% in the presence of nano-microbubbles, depending on operating conditions of the process. The presence of nano-microbubbles increased the recovery of ultrafine particles （-14.36 ＋ 5 μm） more than that of fine particles （-38 ＋ 14.36 μm）. Another major advantage is that the use of nano-microbubbles reduced the collector and frother consumptions by up to 75% and 50%, respectively.
文摘With the rising of IGCC and the second generation PFBC-CC, and with the development of tech-nology of staged combustion to lower emission of NOx, the desulfurization efficiency under reducingatmosphere is raised. In this paper, with the application of the fly-ash recycle and tworstage combus-tion technologies in a fluidized bed combustor, the desulfurization test under reducing atmosphere isdescribed. Meanwllile, ammonia injection test was also conducted. Results show that desulfurizationunder reducing atmosphere has higher efficiency, and ammonia injection denitrification effect is veryperfect.
