The flotation characteristics of Shenfu coal macerals was researched. Taking flotation recovery and enrichment of macerals as the evaluation objects, the influence of the agent dosage, pulp concentration, impeller spe...The flotation characteristics of Shenfu coal macerals was researched. Taking flotation recovery and enrichment of macerals as the evaluation objects, the influence of the agent dosage, pulp concentration, impeller speed and aeration rate on the separating effect was investigated. And the optimum process conditions of flotation were confirmed. The results show that the agent dosage, pulp concentration, impeller speed and aeration rate have a significant impact on flotation recovery and en- richment of macerals. The float recovery was 73.28% and enrichment ratio of vitrinite was 83.89% when CTAB dosage of 1.0 kg/t, pulp concentration of 100 g/L, impeller speed of 1 700 r/min and aeration rate of 0.25 m3/（m2·min） were used. The tailings yield was 60.30% and enrichment ratio of inertinite was 61.44% when CTAB dosage of 0.5 kg/t, pulp concentration of 100 g/L, impeller speed of I 700 r/min and aeration rate of 0.20 m3/（m2·min） were used.展开更多
In this study, single and interactive effect of three parameters, pH, ferrous and pulp concentration has been investigated by a 2^3 full factorial CCRD （central composite rotatable design） composed of eight factoria...In this study, single and interactive effect of three parameters, pH, ferrous and pulp concentration has been investigated by a 2^3 full factorial CCRD （central composite rotatable design） composed of eight factorial points, six central and six axial points. Initially, ＂none＂ mode from transformation subsection was chosen as the default choice for both responses, i.e. %recovery and gram of recovered zinc. Box-Cox plots give the best Lambda for each response （y^Lambda= f （A, B, C .....）） which occur at 1.91 and 2.16 for %recovey and gram of recovered zinc, respectively. A linear （y^1.91 = f （linear）） and a quadratic （y^2. 16= f （quadratic）） equation were suggested by software as the model for %recovery and gram of recovered zinc, respectively. Analysis of variance （ANOVA） for both models shows a high coefficient of determination （R^2）. In order to optimize and find the best conditions under which three parameters occur appropriately, optimization was done numerically. Desirability plots indicate properly that the best conditions occur at pH = 1.46, ferrous = 6.67 g/L, %pulp = 7.1 （%w/v）, %recovery = 86.5, gram of recovered zinc = 0.63 g and desirability = 0.777. Finally, PRP （progressive route of the process） analysis donates us a proper insight of what is happening during these 30 days. PRP analysis categorizes flasks in two parts, 1- flasks worth economically, 2- flasks with one-time-usable feed materials.展开更多
文摘The flotation characteristics of Shenfu coal macerals was researched. Taking flotation recovery and enrichment of macerals as the evaluation objects, the influence of the agent dosage, pulp concentration, impeller speed and aeration rate on the separating effect was investigated. And the optimum process conditions of flotation were confirmed. The results show that the agent dosage, pulp concentration, impeller speed and aeration rate have a significant impact on flotation recovery and en- richment of macerals. The float recovery was 73.28% and enrichment ratio of vitrinite was 83.89% when CTAB dosage of 1.0 kg/t, pulp concentration of 100 g/L, impeller speed of 1 700 r/min and aeration rate of 0.25 m3/（m2·min） were used. The tailings yield was 60.30% and enrichment ratio of inertinite was 61.44% when CTAB dosage of 0.5 kg/t, pulp concentration of 100 g/L, impeller speed of I 700 r/min and aeration rate of 0.20 m3/（m2·min） were used.
文摘In this study, single and interactive effect of three parameters, pH, ferrous and pulp concentration has been investigated by a 2^3 full factorial CCRD （central composite rotatable design） composed of eight factorial points, six central and six axial points. Initially, ＂none＂ mode from transformation subsection was chosen as the default choice for both responses, i.e. %recovery and gram of recovered zinc. Box-Cox plots give the best Lambda for each response （y^Lambda= f （A, B, C .....）） which occur at 1.91 and 2.16 for %recovey and gram of recovered zinc, respectively. A linear （y^1.91 = f （linear）） and a quadratic （y^2. 16= f （quadratic）） equation were suggested by software as the model for %recovery and gram of recovered zinc, respectively. Analysis of variance （ANOVA） for both models shows a high coefficient of determination （R^2）. In order to optimize and find the best conditions under which three parameters occur appropriately, optimization was done numerically. Desirability plots indicate properly that the best conditions occur at pH = 1.46, ferrous = 6.67 g/L, %pulp = 7.1 （%w/v）, %recovery = 86.5, gram of recovered zinc = 0.63 g and desirability = 0.777. Finally, PRP （progressive route of the process） analysis donates us a proper insight of what is happening during these 30 days. PRP analysis categorizes flasks in two parts, 1- flasks worth economically, 2- flasks with one-time-usable feed materials.
