AZ91 Mg alloy recycled by a solid state process and equal channel angular pressing(ECAP)exhibited a superior strength. The mechanical properties of AZ91 Mg alloy recycled from machined chips by extrusion at 623 K and ...AZ91 Mg alloy recycled by a solid state process and equal channel angular pressing(ECAP)exhibited a superior strength. The mechanical properties of AZ91 Mg alloy recycled from machined chips by extrusion at 623 K and ECAP at 573 K and 623 K were compared with those of the reference alloy which was produced from an as-received AZ91 Mg alloy block under the same conditions as the recycled alloy.The recycled specimens show a higher strength at room temperature than the reference alloy.The improvement of the tensile properties is attributed not only to the small grain size,but also to the dispersed oxide contaminants.展开更多
This paper presents a new theoretical model to determine the optimal axial preload of a spindle system, for challenging the traditional method which relies heavily on experience of engineers. The axial preloading stif...This paper presents a new theoretical model to determine the optimal axial preload of a spindle system, for challenging the traditional method which relies heavily on experience of engineers. The axial preloading stiffness was treated as the sum of the spindle modal stiffness and the framework elastic stiffness, based on a novel concept that magnitude of preloads can be controlled by measuring the resonant frequency of a spindle system. By employing an example of a certain type of aircraft simulating rotary table, the modal stiffness was measured on the Agilent 35670A Dynamic Signal Analyzer by experimental modal analysis. The equivalent elastic stiffness was simulated by both finite element analysis in ANSYS? and a curve fitting in MATLAB?. Results showed that the static preloading stiffness of the spindle was 7.2125×107 N/m, and that the optimal preloading force was 120.0848 N. Practical application proved the feasibility of our method.展开更多
基金Projects(50201005,50571031)supported by the National Natural Science Foundation of ChinaProject(2009DFA51830)supported by the Ministry of Science and Technology,China
文摘AZ91 Mg alloy recycled by a solid state process and equal channel angular pressing(ECAP)exhibited a superior strength. The mechanical properties of AZ91 Mg alloy recycled from machined chips by extrusion at 623 K and ECAP at 573 K and 623 K were compared with those of the reference alloy which was produced from an as-received AZ91 Mg alloy block under the same conditions as the recycled alloy.The recycled specimens show a higher strength at room temperature than the reference alloy.The improvement of the tensile properties is attributed not only to the small grain size,but also to the dispersed oxide contaminants.
文摘This paper presents a new theoretical model to determine the optimal axial preload of a spindle system, for challenging the traditional method which relies heavily on experience of engineers. The axial preloading stiffness was treated as the sum of the spindle modal stiffness and the framework elastic stiffness, based on a novel concept that magnitude of preloads can be controlled by measuring the resonant frequency of a spindle system. By employing an example of a certain type of aircraft simulating rotary table, the modal stiffness was measured on the Agilent 35670A Dynamic Signal Analyzer by experimental modal analysis. The equivalent elastic stiffness was simulated by both finite element analysis in ANSYS? and a curve fitting in MATLAB?. Results showed that the static preloading stiffness of the spindle was 7.2125×107 N/m, and that the optimal preloading force was 120.0848 N. Practical application proved the feasibility of our method.
