Bridgman-type directional solidification experiments were conducted for Ti-46Al-8Nb （mole fraction, %） alloy. The effects of the growth rate and the diameter on the microstructure, phase transition and hardness of t...Bridgman-type directional solidification experiments were conducted for Ti-46Al-8Nb （mole fraction, %） alloy. The effects of the growth rate and the diameter on the microstructure, phase transition and hardness of the alloy were investigated. The results show that with the increase of the growth rate and the decrease of the diameter, the fullyβphase solidification changes to the peritectic solidification, and the final microstructure is composed of theα2/γlamellar structure and a multiphase microstructure （B2 phase,α2/γlamellar structure） respectively, which can be attributed to the solute enrichment resulting from the decreasing diffusion and convection ability. The occurrence of peritectic reaction at high growth rate promotes the solute segregation heavily and the coarse lamellar spacing in Al-and Nb-rich region, which greatly decreases the hardness values and leads to the discontinuity of the hardness curves with the increase of the growth rate. Comparatively, the Ti-46Al-8Nb alloy has lower hardness values than the other applied TiAl-based alloys in previous studies.展开更多
The properties and thickness of the bubbles in the froth control the flotation process. There is no work showing how to measure bubble film composition and thickness by a straightforward manner. In this work, a novel ...The properties and thickness of the bubbles in the froth control the flotation process. There is no work showing how to measure bubble film composition and thickness by a straightforward manner. In this work, a novel approach, a custom-designed bubble cell associated with layer interferometry(in the UV-vis region) and FT-IR spectroscopy was used to investigate the effect of solid particle type(hydrophilic vs hydrophobic), concentration and bubble diameter on stability of a bubble blown in air. Stability was quantified by measuring bubble lifetime and hydrated film thickness. Kerosene with silicone oil as a foaming agent was used to evaluate the impact of bubble diameter(test series I). Frother solutions(MIBC, Dowfroth 250, Hexanol and F-150) were used for the solid type concentration experiments(test series II). In the first series of experiments, it was determined that as the diameter of a bubble increased from 10 to 25 mm, so did the hydrated film thickness from 350 to 1000 nm. In the second series, as the silica concentration increased(0 to 10%), an increase in bubble lifetime and hydrated film thickness was resulted(130%-250%). An impact of solid hydrophobicity was found but to a lesser degree than expected. It is possible that the small particle size(<0.1 m) of silica was responsible for this behavior. The findings are used to interpret the effect of solids in flotation froth.展开更多
基金Projects(51071062,51274077,51271068)supported by the National Natural Science Foundation of ChinaProject(2011-P03)supported by Open Fund of State Key Laboratory of Mold and Die Technology of Huazhong University of Science and Technology+1 种基金Project(HIT.NSRIF.2013002)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2011CB605504)supported by the National Basic Research Program of China
文摘Bridgman-type directional solidification experiments were conducted for Ti-46Al-8Nb （mole fraction, %） alloy. The effects of the growth rate and the diameter on the microstructure, phase transition and hardness of the alloy were investigated. The results show that with the increase of the growth rate and the decrease of the diameter, the fullyβphase solidification changes to the peritectic solidification, and the final microstructure is composed of theα2/γlamellar structure and a multiphase microstructure （B2 phase,α2/γlamellar structure） respectively, which can be attributed to the solute enrichment resulting from the decreasing diffusion and convection ability. The occurrence of peritectic reaction at high growth rate promotes the solute segregation heavily and the coarse lamellar spacing in Al-and Nb-rich region, which greatly decreases the hardness values and leads to the discontinuity of the hardness curves with the increase of the growth rate. Comparatively, the Ti-46Al-8Nb alloy has lower hardness values than the other applied TiAl-based alloys in previous studies.
基金Project(2013BAB14B05)supported by National Key Technology Research and Development Program of the Ministry of Science and Technology of China
文摘The properties and thickness of the bubbles in the froth control the flotation process. There is no work showing how to measure bubble film composition and thickness by a straightforward manner. In this work, a novel approach, a custom-designed bubble cell associated with layer interferometry(in the UV-vis region) and FT-IR spectroscopy was used to investigate the effect of solid particle type(hydrophilic vs hydrophobic), concentration and bubble diameter on stability of a bubble blown in air. Stability was quantified by measuring bubble lifetime and hydrated film thickness. Kerosene with silicone oil as a foaming agent was used to evaluate the impact of bubble diameter(test series I). Frother solutions(MIBC, Dowfroth 250, Hexanol and F-150) were used for the solid type concentration experiments(test series II). In the first series of experiments, it was determined that as the diameter of a bubble increased from 10 to 25 mm, so did the hydrated film thickness from 350 to 1000 nm. In the second series, as the silica concentration increased(0 to 10%), an increase in bubble lifetime and hydrated film thickness was resulted(130%-250%). An impact of solid hydrophobicity was found but to a lesser degree than expected. It is possible that the small particle size(<0.1 m) of silica was responsible for this behavior. The findings are used to interpret the effect of solids in flotation froth.
