韩国传统医学的国际化发展动态分析

本文回顾了韩国传统医学的国际化发展历史，重点阐述了韩国传统医学相关技术指标的制定及申报WHO及国际化标准组织（international organization for standardization，ISO）相关标准的发展现状，以及韩国传统医学与我国中医药学国际标准化发展的竞争动态。作者认为我国应抓住时机，尽早将中医学“实质性内容”纳入到各种国际标准范围内，以促进中医药学的国际化。

Analysis of external noise spectrum of high-speed railway

A schematic to make the spectra of the exterior noise of high speed railway was put forward. The exterior noise spectrum was defined based on the characteristics of the high-speed train exterior noise. Its characteristics considered here include identifying the exterior main sources and their locations, their frequency components including the Doppler effect due to the noise sources moving at high speed, the sound field intensity around the train in high-speed operation, the sound radiation path out of the train, and the pressure level and frequency components of the noise at the measuring points specified by the International Organization for Standardization(ISO). The characteristics of the high-speed train exterior noise of the high speed railways in operation were introduced. The advanced measuring systems and their principles for clearly indentifying the exterior noise sources were discussed in detail. Based on the concerned noise results measured at sites, a prediction model was developed to calculate the sound level and the characteristics of the exterior noise at any point where it is difficult to measure and to help to make the exterior noise spectrums. This model was also verified with the test results. The verification shows that there is a good agreement between the theoretical and experimental results.

An Accuracy Improvement for the Clinical Test Result by United ISO-GUM and QE

This research developed the technology which united ISO-GUM （International Organization of Standard-Guide to Express of Uncertainty in Measurement） and QE （Quality Engineer） strategically and employed both feature efficiently. Although to tow technology of purpose use is same, each has future. The purpose is scheduled to improve the accuracy as a result of the clinical examinations. The result of research was used for diagnosis by equivalent Quality Control （eqQC） of the same level when and where, that are needed for broader-based medical system of the time of IT-era. Since National Institute of Standard and Technology （NIST） is recommend use of complicated operation by ISO-GUM for uniting, realization required the newest high quality computer technology. The algorithm of the complexity system of operation is that Fast Fourier Transform （FFT）, Inverse Fast Fourier Transform （IFFT） and Multi-variance Analysis （MA） are needed in Fig. 4. The main new improving points are changed of ambiguous expression method of data, and the pursuit which the cause of worsens accuracy put into data. All data with an assurance reported the final result for patient or donor. Medical laboratory quality system service is offered essential in the laboratory to be correct result for health care by Good Laboratory Practices （GLP） useful ISO 15189. Quality Assurance （QA） is achieved though system reliability.

Collaborative Design of Parametric Sustainable Architecture

Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stakeholders integrate and optimize their information in a digital 3D model. Sometimes it is called Green BIM. But what exactly is that？ Is the International Standard Organization IFC standard useful for this？ And is it compatible with new developments in parametric design？ Advantages and disadvantages of BIM are listed. Full parametric design is needed because it keeps the design flexible and open for changes until the end of the design process. However it is not compatible with IFC; only object parametric design is. A possible way out of this paradox could be the use of scripts that only create objects if they are not already in the BIM database and otherwise only adapt their properties. An example of parametric sustainable architectural design explains the mentioned issues.

Numerical Study on Effects of Door-Opening on Airflow Patterns and Dynamic Cross-Contamination in an ISO Class 5 Operating Room

The contamination diffusion to the operating room when the door is open was simulated with a computational fluid dynamic(CFD) method,to give the extent of the contamination diffusion.The influence of the door-opening procedure was ignored since the door of the operating room is normally a sliding one.The flow field in the case of the 16 s course of opening the door was simulated.The simulated and the experimental results demonstrate that the extent of the contamination diffusion is around 1.5 m when there is no temperature difference between indoor and outdoor,and there is hardly any contamination diffusion when the temperature difference is 1 ℃.It can be concluded that the positive pressure difference in the operating room lost its function in preventing the contamination when the door is open.That the temperature of corridor is lower than that of operating room contributes to contamination control.Keeping 1 ℃ temperature difference between corridor and operating room and increasing positive pressure and air flow are suggested.It is more secure to set up an anteroom if persons come in or out of the operation room at the course of surgery.

Study and Evaluation of Aluminum Capsules to Irradiation of Gaseous Samples in Nuclear Reactor

Gas irradiation in research nuclear reactors is an important way to produce radionuclides. Although some nuclear reactors centers offer this type of service, there are few publications about capsules to irradiation of gaseous samples. This paper describes a method to fabricate and evaluate aluminum capsules to irradiate gaseous samples in nuclear reactor. A semi-circular slotted die from a hydraulic presshead was modified to seal aluminum tubes. The aluminum capsules were subjected to leak detection tests, which demonstrated the accordance with standard ISO 9978.

IDE-OTALEX C. The First Crossborder SDI between Portugal and Spain： Background and Development

IDE-OTALEX is the first crossborder spatial data infrastructure between contiguous Portuguese （Alentejo and Centro） and Spanish （Extremadura） regions. It was implemented to share official geographic information from Alentejo and Extremadura, and now Centro region, with everyone. This is the most effective way to have a distributed and flexible system to be used as a territorial observatory for sustainable development and environment protection in these rural and low populated regions. It also contributes to territorial cohesion, one of the tree main pillars of European Cohesion Policy. It＇s characterized for being a distributed, decentralized, modular and collaborative system, based on standards OGC （Open Geospatial Consortium）, W3C （World Wide Web Consortium）, ISO （International Organization for Standardization） and open source technology, developed to guarantee interoperability between the different GIS （Geographic Information System） provided by each project partner. The geoportal is multilingual （Portuguese, Spanish and English） and integrates a Map viewer, Metadata Catalogue and Gazetteer. It consists in central and local nodes which communicate through WMS （Web Map Services）, CSW （Catalogue Service Web） and WFS （Web Feature Services）. It is now implementing SOS （Sensor Observation Services） and WPS （Web Map Processing）. The geographic information available results of an extensive work of data harmonisation adapted to INSPIRE Directive （D 2007/2/EC, the European Parliament and Council, March 14, 2007）. It integrates basic cartography, socio-economic, territorial and environmental indicators.

Standards

China draft ＂Freight containers-RFID cargo shipment tag system＂ becomes ISO publicly criterion The criterion of Freight containers - RFID cargo shipment tag system （ISO/PAS 18186： 2010） was promulgated officially by the International Organization for Standardization （ISO） on July 1st, 2010,

Status and strategies analysis on international standardization of auricular acupuncture points

OBJECTIVE： To supply literature for developing an international standard of auricular acupuncture points. METHODS： Electronic database searches were con- ducted in the Chinese National Knowledge Infra- structure and VlP, and the Western databases, Pubmed, the National Science and Technology Li- brary, and the German Journal of Acupuncture, from 1990 to April, 2012. We also searched the doc- uments of international symposiums for auricular acupuncture points （AAPs）. Keywords were ＂auricu- lar points＂, ＂auricular acupuncture points＂, ＂ear points＂, or ＂auriculotherapy＂ RESULTS： Basic and clinical research on AAPs was performed in China, the United States, France, andGermany. Clinical AAP research was done in Italy, Austria, Switzerland, Spain, the UK, Holland, Japan, Russia, and Africa. However, AAP research was not communicated internationally. The World Federa- tion of Acupuncture-Moxibustion Societies recom- mended international standard of auricular acu- puncture points （ISAAPs）. Standardized nomencla- ture and locations of AAPs would provide a solid basis to draft an international standard organiza- tion. CONCLUSION： Experts need to find common points from different countries or regions, provide evidence of different ideas, and list the proposal as a recommendation for an international standard.

Temporal variation in modal properties of a base-isolated building during an earthquake

Temporal variation of dynamical modal properties of a base-isolated building is investigated using earthquake records in the building. A batch processing least-squares estimation method is applied to segment-wise time-series data. To construct an input-output system,an auto-regressive model with exogenous input (ARX) of second-order including a forgetting coefficient as a weighting coefficient is used for the estimation of modal parameters. The fundamental and second natural frequencies and the damping ratios of the fundamental and second natural modes of the base-isolated building are identified in the time domain. The identified results are consistent with the results obtained from the micro-tremor vibration data,forced-vibration test data and earthquake records in the present base-isolated building in the case of taking into account the amplitude-dependency of the isolators and viscous dampers. It is finally pointed out that several factors,e.g.,amplitude dependency of the isolator and damper system and special characteristics of the series-type viscous damper system,may be related complicatedly with the temporal variation in modal properties of the above-mentioned system.