重型工业厂房钢柱选型分析与探讨

对重型钢结构厂房的钢柱形式归纳总结,结合某制造基地组装厂房工程案例,对3种不同类型的格构式柱进行计算分析,并综合考虑结构安全性、施工周期、造价等因素,探讨部分类型钢柱的适用性,最终确定了适合本重型钢结构厂房的钢柱形式。

热成型不锈钢圆管混凝土轴压短柱受力性能试验研究

对热成型不锈钢圆管混凝土短柱在轴向压力作用下的承载性能进行试验研究,试验主要参数为混凝土强度(C30和C40)、不锈钢管壁厚t(0.9 mm、1.0 mm和1.2 mm)和试件的高径比λ(3.0、3.5、4.0),试验观测了不锈钢圆管混凝土短柱在轴向压力作用下的破坏现象、试件荷载-轴向变形曲线、荷载-环向应变曲线、荷载-轴向应变曲线等。根据试验的破坏现象,将试件分为5种破坏模式,并分析了不锈钢管壁厚t和试件的高径比λ对试件的承载力、延性、刚度的影响。分析结果表明:试件在屈服后表现出明显的承载力提高;随着钢管壁厚的增加,试件的受压承载力、延性及刚度均有所提高;随着试件高径比增大,试件的延性增大,刚度降低;试件的受压承载力在高径比3.5时最大,4.0时次之,3.0时最小。与普通钢管混凝土相比,不锈钢管混凝土约束放大系数有一定的提高。

Local Tensile Strength of Connection Between H-Steel Beam Flange and Concrete-Filled Circular Column Tube with Through Diaphragm

This paper focused on investigating local tensile strength of connection between steel beam flange and concrete-filled circular column tube with through diaphragm. Three specimens were designed and tested to failure, and the structure behavior was studied by experiment and FEM analysis. On the basis of the results obtained, an estimation for local plastic and ultimate strengths of the connections using yield line theory was attempted, which results in a good prediction.