Based on regional CBM geological characteristics and drainage data of three typical Coalbed Methane(CBM) wells in the southern Qinshui Basin,history matching,productivity prediction and factor analysis of gas producti...Based on regional CBM geological characteristics and drainage data of three typical Coalbed Methane(CBM) wells in the southern Qinshui Basin,history matching,productivity prediction and factor analysis of gas production control are conducted by using COMET3 reservoir modeling software.The results show that in the next 20 years,the cumulative and average daily gas production of the QN01 well are expected to be 800×104 m3 and 1141.1 m3/d,for the QN02 well 878×104 m3 and 1202.7 m3/d and 97.5×104 m3 and 133.55 m3/d for the QN03 well.Gas content and reservoir pressure are the key factors controlling gas production in the area;coal thickness,permeability and porosity are less important;the Langmuir volume,Langmuir pressure and adsorption time have relatively small effect.In the process of CBM recovery,the material source and driving force are the key features affecting gas productivity,while the permeation process is relatively important and the desorption process has some impact on gas recovery.展开更多
The Yajiang earthquake sequence in 2001, with the major events of M S 5.1 on Feb. 14 and of M S 6.0 on Feb.23, are significant events in the Sichuan region during the last 13 years. Eighty-eight earthquakes in the seq...The Yajiang earthquake sequence in 2001, with the major events of M S 5.1 on Feb. 14 and of M S 6.0 on Feb.23, are significant events in the Sichuan region during the last 13 years. Eighty-eight earthquakes in the sequence with at least 5 distinct onset parameters for each recorded by the Sichuan Seismic Network in the period of Jan. 1 through June 30, 2001 were chosen for this study. The events are relocated and the focal mechanism is derived from P-wave onsets for 13 events with relatively larger magnitudes. The focal depth of all earthquakes fall between a range of 2km to 16km, with dominant distribution between 9km to 11km. The foreshocks, the M S5.1 earthquake and the M S6.0 earthquake and their aftershocks are all located close to the Zihe fault and the dominant epicentral distribution is in NW direction, identical to that of the fault. The fracture surface of the focal mechanism is determined in accordance to the mass transfer orientation in the recent earth deformation field in the Yajiang region. The P axes of the principal compressive stress in focal mechanism solutions of the 13 events show bigger vertical components, and the horizontal projection trending SE. The earthquakes are of left-lateral, strike-slip normal, and normal strike-slip types. The rupture surface of most earthquakes strike NW-SE, dipping SW. Based on the above information, we conclude that the Zihe fault that crosses the earthquake area, striking NW and dipping SW, is the seismogenic fault for the Yajiang earthquake sequence.展开更多
Lithology is one of the important factors influencing the stability of roof of coal seams. In order to investigate this, the phenomenon of underground pressure and distribution of pressure were studied by using the lo...Lithology is one of the important factors influencing the stability of roof of coal seams. In order to investigate this, the phenomenon of underground pressure and distribution of pressure were studied by using the local observation and simulation test with similar materials. The observation results show that the distance of initial weighting and periodic weighting of the mudstone roof is shorter than that of sandstone roofs. The sandstone roof with a high strength has a longer distance of initial weighting and periodic weighting, the abutment stress on the working face is big and the height of caving and fracture zone is high. The peak point of abutment stress in the sandstone roof is near to the working face and the pressure bump is inclined to occur. The result is contrary to that in case of the mudstone roof with a low strength. While in the transition zone of nipped sandstone, roof rock-mass is broken and is poor in stability, therefore, it is difficult to hold the roof.展开更多
Solenoid valve is one of the executive parts of weft insertion control system. According to the response characteristics of the solenoid valve, an improved design becomes a necessity. Firstly, the numerical model was ...Solenoid valve is one of the executive parts of weft insertion control system. According to the response characteristics of the solenoid valve, an improved design becomes a necessity. Firstly, the numerical model was established after analyzing the solenoid valve during its start-up and shut-down. Comparing the simulation data with the practical data, it is verified that the numerical simulation model has a high feasibility. Secondly, excitation voltage and spring pre-compression were adjusted respectively, and the response rules after adjusting were investigated. The research of the study shows: the response time tends to be inverse proportional to the excitation voltage during start-up, and it becomes a constant value with the increase of the excitation voltage; the response time is proportional to the spring pre-compression when the solenoid valve starts up, it is inverse proportional to spring pre-compression when the solenoid valve shuts down. And the total response time is a constant value with the increase of the spring pre-compression. Therefore, the value of the excitation voltage and the spring pre-compression should be selected when the curve is becoming flatten. The results of the research can provide the reference to the further development of the solenoid valve.展开更多
基金the National Basic Research Program of China (No.2009 CB219605)the Key Program of the National Natural Science Foundation of China (No.4073042)the Key Program of the National Science and Technology of China (No.2008ZX05034-04)
文摘Based on regional CBM geological characteristics and drainage data of three typical Coalbed Methane(CBM) wells in the southern Qinshui Basin,history matching,productivity prediction and factor analysis of gas production control are conducted by using COMET3 reservoir modeling software.The results show that in the next 20 years,the cumulative and average daily gas production of the QN01 well are expected to be 800×104 m3 and 1141.1 m3/d,for the QN02 well 878×104 m3 and 1202.7 m3/d and 97.5×104 m3 and 133.55 m3/d for the QN03 well.Gas content and reservoir pressure are the key factors controlling gas production in the area;coal thickness,permeability and porosity are less important;the Langmuir volume,Langmuir pressure and adsorption time have relatively small effect.In the process of CBM recovery,the material source and driving force are the key features affecting gas productivity,while the permeation process is relatively important and the desorption process has some impact on gas recovery.
文摘The Yajiang earthquake sequence in 2001, with the major events of M S 5.1 on Feb. 14 and of M S 6.0 on Feb.23, are significant events in the Sichuan region during the last 13 years. Eighty-eight earthquakes in the sequence with at least 5 distinct onset parameters for each recorded by the Sichuan Seismic Network in the period of Jan. 1 through June 30, 2001 were chosen for this study. The events are relocated and the focal mechanism is derived from P-wave onsets for 13 events with relatively larger magnitudes. The focal depth of all earthquakes fall between a range of 2km to 16km, with dominant distribution between 9km to 11km. The foreshocks, the M S5.1 earthquake and the M S6.0 earthquake and their aftershocks are all located close to the Zihe fault and the dominant epicentral distribution is in NW direction, identical to that of the fault. The fracture surface of the focal mechanism is determined in accordance to the mass transfer orientation in the recent earth deformation field in the Yajiang region. The P axes of the principal compressive stress in focal mechanism solutions of the 13 events show bigger vertical components, and the horizontal projection trending SE. The earthquakes are of left-lateral, strike-slip normal, and normal strike-slip types. The rupture surface of most earthquakes strike NW-SE, dipping SW. Based on the above information, we conclude that the Zihe fault that crosses the earthquake area, striking NW and dipping SW, is the seismogenic fault for the Yajiang earthquake sequence.
基金National Natural Science Foundation of China(No.40 172 0 5 9)
文摘Lithology is one of the important factors influencing the stability of roof of coal seams. In order to investigate this, the phenomenon of underground pressure and distribution of pressure were studied by using the local observation and simulation test with similar materials. The observation results show that the distance of initial weighting and periodic weighting of the mudstone roof is shorter than that of sandstone roofs. The sandstone roof with a high strength has a longer distance of initial weighting and periodic weighting, the abutment stress on the working face is big and the height of caving and fracture zone is high. The peak point of abutment stress in the sandstone roof is near to the working face and the pressure bump is inclined to occur. The result is contrary to that in case of the mudstone roof with a low strength. While in the transition zone of nipped sandstone, roof rock-mass is broken and is poor in stability, therefore, it is difficult to hold the roof.
基金supported by the National Natural Science Foundation of China(No.51006090)
文摘Solenoid valve is one of the executive parts of weft insertion control system. According to the response characteristics of the solenoid valve, an improved design becomes a necessity. Firstly, the numerical model was established after analyzing the solenoid valve during its start-up and shut-down. Comparing the simulation data with the practical data, it is verified that the numerical simulation model has a high feasibility. Secondly, excitation voltage and spring pre-compression were adjusted respectively, and the response rules after adjusting were investigated. The research of the study shows: the response time tends to be inverse proportional to the excitation voltage during start-up, and it becomes a constant value with the increase of the excitation voltage; the response time is proportional to the spring pre-compression when the solenoid valve starts up, it is inverse proportional to spring pre-compression when the solenoid valve shuts down. And the total response time is a constant value with the increase of the spring pre-compression. Therefore, the value of the excitation voltage and the spring pre-compression should be selected when the curve is becoming flatten. The results of the research can provide the reference to the further development of the solenoid valve.
