The Second-generation Wavelet Transform and its Application in Denoising of Seismic Data

This paper discusses the principle and procedures of the second-generation wavelet transform and its application to the denoising of seismic data. Based on lifting steps, it is a flexible wavelet construction method using linear and nonlinear spatial prediction and operators to implement the wavelet transform and to make it reversible. The lifting scheme transform -includes three steps： split, predict, and update. Deslauriers-Dubuc （4, 2） wavelet transforms are used to process both synthetic and real data in our second-generation wavelet transform. The processing results show that random noise is effectively suppressed and the signal to noise ratio improves remarkably. The lifting wavelet transform is an efficient algorithm.

Numerical simulation scattered imaging in deep mines

Conventional seismic exploration,mostly based on reflection theory,hardly has accurate imaging results for disaster geologic bodies which have small scale,steep dip,or complex structure.In this paper,we design two typical geologic models for analyzing the characteristics of scattered waves in mines for forward modeling by finite difference and apply the equivalent offset migration（EOM）and EOM-based interference stack migration methods to mine prospecting.We focus on the analysis of scatted imaging’s technological superiority to reflection imaging.Research shows：1）scattered imaging can improve fold and make the best of weak scattered information,so it shows better results than post-stack migration imaging and 2）it can utilize the diffraction stack migration method-based ray path theory for mine seismic advanced prediction,so it provides an new efficient imaging method for improving resolution of mine seismic exploration.

Seismic Prediction of Prolific Oil Zones in Carbonate Reservoirs with Extremely Low Porosity and Permeability under Salt

The Carboniferous reservoir in KJ oilfield is a carbonate reservoir with extremely low porosity and permeability and high-pressure. The reservoir has severe heterogeneity, is deeply buried, has complex master control factors, is covered with thick salt, all of which result in the serious distortion of reflection time and amplitudes under the salt, the poor seismic imaging, and the low S/N ratio and resolution. The key to developing this kind of reservoir is to correctly predict the distribution of highly profitable oil zones. In this paper we start by analyzing the master control factors, perform seismic-log calibration, optimize the seismic attributes indicating the lithofacies, karst, petrophysical properties, and fractures, and combine these results with the seismic, geology, log, oil reservoir engineering, and well data. We decompose the seismic prediction into six key areas： structural interpretation, prediction of lithofacies, karst, petrophysical properties, fractures, and then perform an integrated assessment. First, based on building the models of faults and fractures, sedimentary facies, and karst, we predict the distribution of the most favorable reservoir zones qualitatively. Then, using multi-parameter inversion and integrated multi-attribute analysis, we predict the favorable reservoir distribution quantitatively and semi-quantitatively to clarify the distribution of high-yield zones. We finally have a reliable basis for optimal selection of exploration and development targets.

Effects of Gabor transform parameters on signa time-frequency resolution

In this paper, it is described that the time-frequency resolution of geophysical signals is affected by the time window function attenuation coefficient and sampling interval and how such effects are eliminated effectively. Improving the signal resolution is the key to signal time-frequency analysis processing and has wide use in geophysical data processing and extraction of attribute parameters. In this paper, authors research the effects of the attenuation coefficient choice of the Gabor transform window function and sampling interval on signal resolution. Unsuitable parameters not only decrease the signal resolution on the frequency spectrum but also miss the signals. It is essential to first give the optimum window and range of parameters through time-frequency analysis simulation using the Gabor transform. In the paper, the suggestions about the range and choice of the optimum sampling interval and processing methods of general seismic signals are given.

Seismic Acquisition in the Beach of the Shengli Oilfield

The beach of the Shengli oilfield, as the prospect for steady continuous development of the Shengli oilfield, has a large area, special geographic and geological conditions, and other technical difficulties so that exploration has been slow. Seismic acquisition methods in the beach area and very shallow water have been investigated and, with the introduction of new equipment, given rise to more sophisticated acquisition geometries. A series of improved seismic exploration methods in the beach area and very shallow water are established by analyzing different shot and receiver parameters. As a result, S/N ratio and resolution of seismic data have been improved significantly to identify subsurface structures, improve reservoir description, and increase reserves and production.

东方物探:管办分离,实现物资采购管理效益最大化

东方地球物理公司是集团公司下属的专门从事全球化地震勘探业务的工程技术服务公司。2008年，公司营业额达128亿元，陆地地震勘探市场占全球陆地勘探市场的30％以上，跃居全球第一位，综合实力位居全球物探行业前4位。

Separation of P. and SV-wavefields from multi-componen seismic data

In multi-component seismic exploration, the horizontal and vertical components both contain P- and SV-waves. The P- and SV-wavefields in a seismic record can be separated by their horizontal and vertical displacements when upgoing P- and SV-waves arrive at the sea floor. If the sea floor P wave velocity, S wave velocity, and density are known, the separation can be achieved in ther-p domain. The separated wavefields are then transformed to the time domain. A method of separating P- and SV-wavefields is presented in this paper and used to effectively separate P- and SV-wavefields in synthetic and real data. The application to real data shows that this method is feasible and effective. It also can be used for free surface data.

The seismic CT method in measuring rock bodies

The seismic computed tomography （CT） method is derived from the basic principles of X-ray section scanning first applied in medical science. The method records P-wave arrivals between shots and receivers in separate boreholes. Using the velocity information from 2D seismic P-wave arrival inversion, we can determine the distribution of velocity in rock and soil bodies. This paper introduces a practical case of using the seismic CT method for detecting the structure of the rocks for tunnel engineering and to utilize SIRT algorithms for doing first arrival time iterative inversion. Compared with other exploration methods, it is more efficient and accurate.

Geology and Exploration of Oil and Gas in the Ordos Basin

The Ordos basin is rich in oil and gas resources. The structures in the basin are generally rather gentle. Most of the oil and gas pools already found are belong to the types of lithologic, lithostratigraphic and paleo-geomorphic with thin reservoirs. The geology of oil and gas and the generation and distribution of oil and gas resources in the Ordos basin is analyzed in detail in the paper. It is also pointed out in the paper that what direction should be taken in oil and gas exploration in the basin, and that the important role of the seismic prospecting technologies in the discovery of large oil and gas fields in the basin could not be replaced.

Application of Catastrophe Theory in 3D Seismic Data Interpretation of Coal Mine

In order to detect fault exactly and quickly, cusp catastrophe theory is used to interpret 3D coal seismic data in this paper. By establishing a cusp model, seismic signal is transformed into standard form of cusp catastrophe and catastrophe parameters, including time-domain catastrophe potential, time-domain catastrophe time, frequency-domain catastrophe potential and frequency- domain degree, are calculated. Catastrophe theory is used in 3D seismic structural interpretation in coal mine. The results show that the position of abnormality of the catastrophe parameter profile or curve is related to the location of fault, and the cusp catastrophe theory is effective to automatically pick up geology information and improve the interpretation precision in 3D seismic data.

Forecasting Fractures in Coal Seams by Using Azimuthal Anisotropy from P-Wave Seismic Data

If the thickness of coal seams and the lithology of both roofs and floors of coal seams have not changed at all or only a little, then it is thought that the elastic anisotropy of coal seams depends mainly on fractures and obeys the horizontally symmetric model of an azimuth anisotropy. For a fixed offset, the amplitude A of the reflection P-wave and the cosine of 2φ has an approximately linear relation, (φ is the source-detector azimuth with respect to the fracture strike. Based on this relationship, many things can be done, such as the extraction of macro bins, the correction of residual normal moveout, the formation of azimuth gather, the transformation and normalization of azimuth gathers and the extraction of reflection wave amplitudes of coal seams. The least squares method was used to inverse theoretically the direction and density of fractures of coal seams. The result is in good agreement with the regional geological structure, indicating that the azimuth anisotropic analysis of the P-wave is feasible in evaluating the density and direction of fractures in coal seams.

A Case History of Secondary 3D Seismic Exploration in the Liaohe Basin: An Example from the Rongshengpu–Qianjin Area

The working area is located in the industrially developed region of Rongshengpu-Qianjin, where a surface water system is developed, surface-layer lithology is complicated, and various kinds of hydrocarbon traps are buried at depth. The seismic data acquired previously couldn＇t be interpreted due to the complex surface and geological conditions. Taking secondary 3D seismic from the Rongshengpu-Qianjin area as an example, this paper describes a set of techniques designed to overcome these difficulties and improve the quality of seismic data. The applied techniques included flexible acquisition geometry, low-noise receiver conditions, quantitative quality control, and so on.

Application of a New Qeneration of Geophonesto Improve Seismic Acquisitionin Onshore-offshore Transition Areas

In this paper, we review the differences between velocity geophones （VG） and acceleration geophones （AG） and their effect on seismic signals acquired in onshore-offshore transition areas. We present a new generation of Land Piezoelectric Geophone （LPG） and analyze its performance. Our field experiments demonstrate that our new LPG can be used to substitute for VGs in order to eliminate phase, frequency and energy differences between different geophone systems commonlv used in transition areas.

Feasibility study using simulation mode for offshore field SZ36-1

Field SZ36-1 is a water-flooded heavy oil reservoir with high porosity and unconsolidated sand. The recovery rate is low so that it becomes a challenge for production. Time-lapse seismic data is studied to improve the oil recovery for this field, This feasibility study analyzes the possible time-lapse seismic attribute spatial distribution using dynamic data and the reservoir model to determine the optimum time to acquire a new seismic survey. Based on the study, it is found that the time-lapse seismic response for this unconsolidated sand has a strong signature due to solution gas when the reservoir pressure is below the bubble point. This indicates that acquiring a new survey after 10 years of production is appropriate for a time-lapse seismic application.

An analysis of the multi-fold method for GPR exploration

Multi-fold technology is widely applied in seismic exploration as a method of enhancing useful signals and suppressing noise interference to greatly increase the signal to noise ratio （S/N）. The authors introduce it to ground-penetrating radar （GPR） surveys and compare the experimental results to the conventional profiling method to demonstrate the feasibility and advantages of the technique for GPR exploration. Based on the experimental data, the authors summarize the GPR wave propagation rules and the parameters of multi- fold acquisition and processing. It is proven to be a useful attempt to enrich the GPR survey technology.