连续-现浇-金属弹簧隔振器式浮置板道床施工研究

本文通过对深圳地铁一期工程单洞双线马蹄形隧道内 ,连续 -现浇 -金属弹簧隔振器式浮置板道床施工工艺的阐述 ,同时综合国内外地铁浮置板式道床施工工艺特点 ,总结了一些经验和认识 ,以供类似工程施工借鉴。

Dynamic response of a beam on a Pasternak foundation and under a moving load

The dynamic response of an infinite beam placed on a Pasternak foundation when the system was subjected to a moving load was investigated.We used the double Fourier transform and its inversion to solve the formulations of the problem.A closed form analytic solution of the beam was obtained by the theorem of residues.We selected a numerical example to illustrate the dynamic response of the beam on Pasternak and Winkler foundations,respectively.We discuss the effect of the moving load velocity on the dynamic displacement response of the beam.The maximum deflection of the beam increases slightly with increased load velocity but increases significantly with reduced shear modulus of subgrade at a given velocity.The maximum deflection of a beam resting on a Pasternak foundation is much smaller than that of a beam on a Winkler foundation.

Lifeline system network reliability calculation based on GIS and FTA

Lifelines, such as pipeline, transportation, communication, electric transmission and medical rescue systems, are complicated networks that always distribute spatially over large geological and geographic units. The quantification of their reliability under an earthquake occurrence should be highly regarded, because the performance of these systems during a destructive earthquake is vital in order to estimate direct and indirect economic losses from lifeline failures, and is also related to laying out a rescue plan. The research in this paper aims to develop a new earthquake reliability calculation methodology for lifeline systems. The methodology of the network reliability for lifeline systems is based on fault tree analysis （FTA） and geological information system （GIS）. The interactions existing in a lifeline system ale considered herein. The lifeline systems are idealized as equivalent networks, consisting of nodes and links, and are described by network analysis in GIS. Firstly, the node is divided into two types： simple node and complicated node, where the reliability of the complicated node is calculated by FTA and interaction is regarded as one factor to affect performance of the nodes. The reliability of simple node and link is evaluated by code. Then, the reliability of the entilre network is assessed based on GIS and FTA. Lastly, an illustration is given to show the methodology.

Effects of freeze-thaw cycle on engineering properties of loess used as road fills in seasonally frozen ground regions,North China

Compacted loess is widely used as fills of road embankments in loess regions of northern China.Generally, densely-compacted loess can satisfy the requirements of embankment strength and postconstruction deformation. However, uneven subsidence, pavement cracks and other related damages can affect the integrity of loess subgrade after several years of operation,and even cause some hazards, especially in North China, where the strong freeze-thaw erosion occurs. In this study, cyclic freeze-thaw tests for both densely and loosely compacted loess samples were performed to determine the variation in engineering properties such as volume, void ratio, collapsible settlement,microstructure, and the related mechanisms were addressed. The experimental results showed that an obvious water migration and redistribution occurred within the samples during freeze-thaw cycles. Ice lenses and fissures could be identified in the upper frozen layers of the samples. After freeze-thaw cycles,the dry densities of the upper layers of samples changed significantly due to strong freeze-thaw erosion. The dry densities decreased for the dense sample and increased for the loose sample. It can be found that dense samples become loose, while loose samples became dense with the increasing number of freeze-thaw cycles. Their related void ratios changed reversely. Both void ratios tended to fall into a certain range, which verified the concept of a residual void ratio proposed by Viklander. The loosening process of densely compacted samples involves the formation of large pores, volume increase and density reduction as well as the related changes in mechanical properties because freeze-thaw cycles may be important contribution to problems of loess road embankments.Adverse effects of freeze-thaw cycles, therefore,should be taken into account in selecting loess parameters for the stability evaluation of road embankment in seasonally frozen ground regions.

Determination of construction art and parameters for passenger dedicated line grouting test within karst area

There are many karst areas within Wuhan-Guangzhou route. Karst grouting is one of the main construction procedures of the sub-grade construction. Through construction art tests,construction principles,water and cementation ratio,grouting construction key points and quality check requirements were determined. Grouting quantity and pressure can be determined according to different geology conditions. Recommendations for quality problems such as bad practicability of grouting,unexpected dissipation of slurry,slurry belching,and overfeeding of slurry going to non-grouting area were proposed.

Stability evaluation and protection of slope for Laosongling-Yanji Highway

The authors analyzed the engineering geological characteristics of the slope of the study area (K75+840-K76+340). Two typical cross-sections have been chosen to analyze the failure modes after the excavation of the highway. Different types of the failure modes have been calculated and analyzed. The results show that some dealing methods have been advised to ensure the stability of the slopes.