To better understand the mechanism of the Mw6.3 L＇Aquila （Central Italy） earthquake occurred in 2009, global positioning system （GPS） and interferometric synthetic aperture radar （InSAR） data were used to deriv...To better understand the mechanism of the Mw6.3 L＇Aquila （Central Italy） earthquake occurred in 2009, global positioning system （GPS） and interferometric synthetic aperture radar （InSAR） data were used to derive the coseismic slip distribution of the earthquake fault. Firstly, based on the homogeneous elastic half-space model, the fault geometric parameters were solved by the genetic algorithm. The best fitting model shows that the fault is a 13.7 km×14.1 km rectangular fault, in 139.3° strike direction and 50.2° southwest-dipping. Secondly, fixing the optimal fault geometric parameters, the fault plane was extended and discretized into 16× 16 patches, each with a size of 1 kmx 1 krn, and the non-uniform slip distribution of the fault was inverted by the steepest descent method with an appropriate smoothing ratio based on the layered crustal structure model. The preferred solution shows that the fault is mainly a normal fault with slight right-lateral strike slip, the maximum slip of 1.01 m is located in the depth of 8.28 km, the average rake is -100.9°, and the total geodetic moment is about 3.34× 1018 N.m （Mw 6.28）. The results are much closer than previous studies in comparison with the seismological estimation. These demonstrate that the coseismic fault slip distribution of the L＇Aauila earthauake inverted by the crustal model considering layered characters is reliable.展开更多
Using GPS observations of horizontal movement from 2001 to 2003 and the cross-fault mobile short-levelling data of 1988～2003, and with the aid of the improved negative dislocation model and the time-varying curve of ...Using GPS observations of horizontal movement from 2001 to 2003 and the cross-fault mobile short-levelling data of 1988～2003, and with the aid of the improved negative dislocation model and the time-varying curve of strain intensity ratio of fault deformation, the regional tectonic deformation background and medium- and short-term precursors related to the preparation of the Minle-Shandan earthquakes of M S6.1 and M S5.8 on October 25, 2003 are investigated. The results reveal that, under the background of the wide-range deformation adjustment, short-term relaxation and recovery caused by the Kunlun Mountains earthquake of M S8.1, the hypocenters of the earthquakes are located on the north edge of the shear stress enhancement zone between the compressional locked segments of block boundary fault, a place which may represent an accelerated strain accumulation. An obvious anomaly of strain intensity ratio appeared in short-levelling measurements crossing over the fault at the Shihuiyaokou site, the closest to the epicenters, 3 months before the occurrence of the earthquakes. In addition, the variation in number of anomalies from 10-odd days to months before the earthquakes in the entire monitoring area and the anomaly concentration and local enhancement relative to near source in the 3 months before the earthquakes are regarded to be precursors to the two events.展开更多
In the proximity of an active fault, spatial variation of peak ground motion is significantly affected by the faulting mechanism. It has been observed that near fault ground motions consists of different characteristi...In the proximity of an active fault, spatial variation of peak ground motion is significantly affected by the faulting mechanism. It has been observed that near fault ground motions consists of different characteristics compared to the far fault ground motions. Near fault records, in the distance range of less than 100 m from the faults are not available except for few cases. Therefore numerical simulation of ground motions for such near-fault situations is necessary. In addition to the understanding of the phenomenon of near fault ground motion there is a need to enhance our understanding of the possible potential hazard that can be caused due to the future rupture activity by understanding the phenomenon of surface faulting. In this paper we propose numerical simulation based on discrete modeling to investigate the fault rupture propagation and its effect on the surface peak ground acceleration. In the present two dimensional study rupture propagation due to bedrock motion has been observed for different shear wave velocity. A model of size 1000× 150 m is selected for this purpose. It has been observed that as the stiffness of the media is decreasing, the affected surface is decreasing and also width of the shear crack zone is decreasing. Secondly, we attempted to study the ground motion on the surface due to the bedrock motion in presence of boulders in the soil media by keeping the boulder at different positions. We find that there is an increase in the shear zone as well as the PGA on the surface when the boulder is present on the foot wall and in the vicinity of the rupture zone. Finally, we performed the analysis using layered media and studied the affect of crack propagation and also the variation of peak accelerations. Findings from the study can be utilized to assess the damage potential of the near fault areas.展开更多
基金Projects(40974006,40774003) supported by the National Natural Science Foundation of ChinaProject(NCET-08-0570) supported by the Program for New Century Excellent Talents in Chinese Universities+2 种基金Projects(2011JQ001,2009QZZD004) supported by the Fundamental Research Funds for the Central Universities in ChinaProjects(09K005,09K006) supported by the Key Laboratory for Precise Engineering Surveying & Hazard Monitoring of Hunan Province,ChinaProject(1343-74334000023) supported by the Graduate DegreeThesis Innovation Foundation of Central South University,China
文摘To better understand the mechanism of the Mw6.3 L＇Aquila （Central Italy） earthquake occurred in 2009, global positioning system （GPS） and interferometric synthetic aperture radar （InSAR） data were used to derive the coseismic slip distribution of the earthquake fault. Firstly, based on the homogeneous elastic half-space model, the fault geometric parameters were solved by the genetic algorithm. The best fitting model shows that the fault is a 13.7 km×14.1 km rectangular fault, in 139.3° strike direction and 50.2° southwest-dipping. Secondly, fixing the optimal fault geometric parameters, the fault plane was extended and discretized into 16× 16 patches, each with a size of 1 kmx 1 krn, and the non-uniform slip distribution of the fault was inverted by the steepest descent method with an appropriate smoothing ratio based on the layered crustal structure model. The preferred solution shows that the fault is mainly a normal fault with slight right-lateral strike slip, the maximum slip of 1.01 m is located in the depth of 8.28 km, the average rake is -100.9°, and the total geodetic moment is about 3.34× 1018 N.m （Mw 6.28）. The results are much closer than previous studies in comparison with the seismological estimation. These demonstrate that the coseismic fault slip distribution of the L＇Aauila earthauake inverted by the crustal model considering layered characters is reliable.
文摘Using GPS observations of horizontal movement from 2001 to 2003 and the cross-fault mobile short-levelling data of 1988～2003, and with the aid of the improved negative dislocation model and the time-varying curve of strain intensity ratio of fault deformation, the regional tectonic deformation background and medium- and short-term precursors related to the preparation of the Minle-Shandan earthquakes of M S6.1 and M S5.8 on October 25, 2003 are investigated. The results reveal that, under the background of the wide-range deformation adjustment, short-term relaxation and recovery caused by the Kunlun Mountains earthquake of M S8.1, the hypocenters of the earthquakes are located on the north edge of the shear stress enhancement zone between the compressional locked segments of block boundary fault, a place which may represent an accelerated strain accumulation. An obvious anomaly of strain intensity ratio appeared in short-levelling measurements crossing over the fault at the Shihuiyaokou site, the closest to the epicenters, 3 months before the occurrence of the earthquakes. In addition, the variation in number of anomalies from 10-odd days to months before the earthquakes in the entire monitoring area and the anomaly concentration and local enhancement relative to near source in the 3 months before the earthquakes are regarded to be precursors to the two events.
文摘In the proximity of an active fault, spatial variation of peak ground motion is significantly affected by the faulting mechanism. It has been observed that near fault ground motions consists of different characteristics compared to the far fault ground motions. Near fault records, in the distance range of less than 100 m from the faults are not available except for few cases. Therefore numerical simulation of ground motions for such near-fault situations is necessary. In addition to the understanding of the phenomenon of near fault ground motion there is a need to enhance our understanding of the possible potential hazard that can be caused due to the future rupture activity by understanding the phenomenon of surface faulting. In this paper we propose numerical simulation based on discrete modeling to investigate the fault rupture propagation and its effect on the surface peak ground acceleration. In the present two dimensional study rupture propagation due to bedrock motion has been observed for different shear wave velocity. A model of size 1000× 150 m is selected for this purpose. It has been observed that as the stiffness of the media is decreasing, the affected surface is decreasing and also width of the shear crack zone is decreasing. Secondly, we attempted to study the ground motion on the surface due to the bedrock motion in presence of boulders in the soil media by keeping the boulder at different positions. We find that there is an increase in the shear zone as well as the PGA on the surface when the boulder is present on the foot wall and in the vicinity of the rupture zone. Finally, we performed the analysis using layered media and studied the affect of crack propagation and also the variation of peak accelerations. Findings from the study can be utilized to assess the damage potential of the near fault areas.
