What are the anomalous seismic reflection bodies at depths of over 6000m？Are they reefs or igneous rock？This is a difficult problem for seismic techniques,but the GMES technique can handle it .The GMES technique is ...What are the anomalous seismic reflection bodies at depths of over 6000m？Are they reefs or igneous rock？This is a difficult problem for seismic techniques,but the GMES technique can handle it .The GMES technique is a joint exploration technique combining gravity,magnetic,electrical,and seismic techniques.The specific procedure is to conduct a 2D interface-constrained CEMP inversion using 2D seismic and log data followed by a property parameter inversion of the anomalous bodics using gravity and seismic data by the stripping technique.We then estimate the physical properties ofthe anomalous bodies,such as density,susceptibility,resistivity,velocity,and etc.to deduce the geological features of the bodies and provide a basis for drilling decisions.The work in the TZ area reported in this paper shows the applicability of the technique.展开更多
In this study,based on the body wave arrival data of 5506 earthquakes recorded by 32 fi xed stations and 94 temporary stations in Yangbi and surrounding areas,the source parameters of Yangbi Ms6.4 earthquake sequence ...In this study,based on the body wave arrival data of 5506 earthquakes recorded by 32 fi xed stations and 94 temporary stations in Yangbi and surrounding areas,the source parameters of Yangbi Ms6.4 earthquake sequence and three-dimensional(3-D)fi ne Vp,Vs,and Vp/Vs were inverted by using the consistency-constrained double-diff erence tomography method.The results showed that the focal depth after relocation was mostly in the range of 3–10 km,evidently nearly horizontally distributed,and concentrated in the weak area of the high-velocity body or at the side of the high-low-velocity body transition zone toward the high-velocity body,showing a good corresponding relationship with the velocity structure.The velocity structure in the Yangbi area has remarkably uneven characteristics.The seismic activity area is dominated by high-velocity bodies prone to brittle fracture near the surface.As the depth increases,low-velocity anomalies appear.A signifi cant diff erence was observed in the wave velocity ratio between the upper and lower sides of the seismically dense strip.Based on the focal mechanism of the Yangbi Ms6.4 earthquake and the fine 3-D velocity structure,this article concludes that the Yangbi Ms6.4 earthquake was caused by a strong regional tectonic stress concentrated in the relatively weak area by hard high-velocity bodies on the northwest sides.The Ms5.6 foreshock broke the inherent balance of regional stress and promoted the occurrence of the Yangbi Ms6.4 mainshock.Afterward,the stress was adjusted to a new equilibrium state through a large number of aftershocks,forming a foreshock–mainshock–aftershock type of seismic activity model.Based on the activity law of the Yangbi Ms6.4 earthquake sequence and characteristics of the 3D velocity structure distribution,this paper speculates that the seismogenic structure of the Yangbi earthquake was possibly a northwest strike-slip buried fault with a depth of 3–10 km on the southwest side of the Weixi–Qiaohou fault.展开更多
The amplitudes of the Earth＇s free oscillations have a close relationship to earthquake focal mechanisms. Focal mechanisms of large earthquakes can be well analyzed and constrained with observations of long period fr...The amplitudes of the Earth＇s free oscillations have a close relationship to earthquake focal mechanisms. Focal mechanisms of large earthquakes can be well analyzed and constrained with observations of long period free oscillations. Although the 2013 Lushan earthquake was only moderately sized, observable spherical normal modes were excited and clearly observed by a su- perconductive gravimeter and a broadband seismometer. We compare observed free oscillations with synthetic normal modes corresponding to four different focal mechanisms for the Lushan earthquake. The results show that source parameters can be analyzed and constrained by spherical normal modes in a 2.3-5 mHz frequency band. The scalar seismic moment M~ has a major influence on the amplitudes of free oscillations; additionally, the strike, dip, rake and depth of the hypocenter have mi- nor influences. We found that the synthetic modes corresponding to the focal mechanism determined by the Global Centroid Moment Tensor show agreement to the observed modes, suggesting that earthquake magnitudes predicted in this way can readily reflect the total energy released by the earthquake. The scalar seismic moment obtained by far-field body wave inver- sion is significantly underestimated. Focal mechanism solutions can be improved by joint inversion of far- and near-field data.展开更多
文摘What are the anomalous seismic reflection bodies at depths of over 6000m？Are they reefs or igneous rock？This is a difficult problem for seismic techniques,but the GMES technique can handle it .The GMES technique is a joint exploration technique combining gravity,magnetic,electrical,and seismic techniques.The specific procedure is to conduct a 2D interface-constrained CEMP inversion using 2D seismic and log data followed by a property parameter inversion of the anomalous bodics using gravity and seismic data by the stripping technique.We then estimate the physical properties ofthe anomalous bodies,such as density,susceptibility,resistivity,velocity,and etc.to deduce the geological features of the bodies and provide a basis for drilling decisions.The work in the TZ area reported in this paper shows the applicability of the technique.
基金supported by the Research Project of Tianjin Earthquake Agency (No. Yb202101, Zd202101)
文摘In this study,based on the body wave arrival data of 5506 earthquakes recorded by 32 fi xed stations and 94 temporary stations in Yangbi and surrounding areas,the source parameters of Yangbi Ms6.4 earthquake sequence and three-dimensional(3-D)fi ne Vp,Vs,and Vp/Vs were inverted by using the consistency-constrained double-diff erence tomography method.The results showed that the focal depth after relocation was mostly in the range of 3–10 km,evidently nearly horizontally distributed,and concentrated in the weak area of the high-velocity body or at the side of the high-low-velocity body transition zone toward the high-velocity body,showing a good corresponding relationship with the velocity structure.The velocity structure in the Yangbi area has remarkably uneven characteristics.The seismic activity area is dominated by high-velocity bodies prone to brittle fracture near the surface.As the depth increases,low-velocity anomalies appear.A signifi cant diff erence was observed in the wave velocity ratio between the upper and lower sides of the seismically dense strip.Based on the focal mechanism of the Yangbi Ms6.4 earthquake and the fine 3-D velocity structure,this article concludes that the Yangbi Ms6.4 earthquake was caused by a strong regional tectonic stress concentrated in the relatively weak area by hard high-velocity bodies on the northwest sides.The Ms5.6 foreshock broke the inherent balance of regional stress and promoted the occurrence of the Yangbi Ms6.4 mainshock.Afterward,the stress was adjusted to a new equilibrium state through a large number of aftershocks,forming a foreshock–mainshock–aftershock type of seismic activity model.Based on the activity law of the Yangbi Ms6.4 earthquake sequence and characteristics of the 3D velocity structure distribution,this paper speculates that the seismogenic structure of the Yangbi earthquake was possibly a northwest strike-slip buried fault with a depth of 3–10 km on the southwest side of the Weixi–Qiaohou fault.
基金supported by the National Basic Research Program of China (Grant No. 2014CB845902)National Natural Science Foundation of China (Grant Nos. 41174022, 4127408 and 41021003)
文摘The amplitudes of the Earth＇s free oscillations have a close relationship to earthquake focal mechanisms. Focal mechanisms of large earthquakes can be well analyzed and constrained with observations of long period free oscillations. Although the 2013 Lushan earthquake was only moderately sized, observable spherical normal modes were excited and clearly observed by a su- perconductive gravimeter and a broadband seismometer. We compare observed free oscillations with synthetic normal modes corresponding to four different focal mechanisms for the Lushan earthquake. The results show that source parameters can be analyzed and constrained by spherical normal modes in a 2.3-5 mHz frequency band. The scalar seismic moment M~ has a major influence on the amplitudes of free oscillations; additionally, the strike, dip, rake and depth of the hypocenter have mi- nor influences. We found that the synthetic modes corresponding to the focal mechanism determined by the Global Centroid Moment Tensor show agreement to the observed modes, suggesting that earthquake magnitudes predicted in this way can readily reflect the total energy released by the earthquake. The scalar seismic moment obtained by far-field body wave inver- sion is significantly underestimated. Focal mechanism solutions can be improved by joint inversion of far- and near-field data.
