Measurement while drilling systems are becoming an important part of excavation operations for rock characterization and ground support design that require reliable information on rock strength and location ＆ frequen...Measurement while drilling systems are becoming an important part of excavation operations for rock characterization and ground support design that require reliable information on rock strength and location ＆ frequency of joints or voids. This paper focuses on improving rock characterization algorithms for instrumented roof-boRer systems. For this purpose, an improved void detection algorithm is proposed, where the underlying theory is built upon the concept of mean change detection based on the feed pressure signals. In addition, the application of acoustic sensing for void detection is examined and it is shown that the variance of the filtered acoustic signal is correlated to the strength of the material being drilled. The proposed algorithm has been validated on the data collected from full-scale drilling tests in various concrete and rock samples at the J. H. Fletcher facility.展开更多
One-sided ascending or descending Synthetic Aperture Radar（SAR） stereoradargrammetry has limited accuracy of topographic mapping due to the short spatial baseline（-100 km） and small intersection angle. In order to...One-sided ascending or descending Synthetic Aperture Radar（SAR） stereoradargrammetry has limited accuracy of topographic mapping due to the short spatial baseline（-100 km） and small intersection angle. In order to improve the performance and reliability of generating digital elevation model（DEM） from spaceborne SAR radargrammetry, an exploration of two-sided stereoradargrammetry from the combination of ascending and descending orbits with geometric configuration of long spatial baseline（-1000 km） was conducted in this study. The slant-range geometry between SAR sensors to the earth surface and the Doppler positioning equations were employed to establish the stereoscopic intersection model. The measurement uncertainty of two-sided radargrammetric elevation was estimated on the basis of radar parallax of homogeneous points between input SAR images. Two stereo-pairs of ALOS/PALSAR（Advanced Land Observing Satellite/Phased Array type L-band Synthetic Aperture Radar） acquisitions with the orbital separation almost 1080 km over the west Sichuan foreland basin with rolling topography in southwestern China were employed in the study to obtain the up-to-date terrain data after the 2008 Wenchuan earthquake that hit this area. Thequantitative accuracy assessment of two-sided radargrammetric DEM was performed with reference to field GPS observations. The experimental results show that the elevation accuracy reaches 5.5 m without ground control points（GCPs） used, and the accuracy is further improved to 1.5 m with only one GPS GCP used as the least constraint. The theoretical analysis and testing results demonstrate that the twosided long baseline SAR radargrammetry from the ascending and descending orbits can be a very promising technical alternative for large-area and high accuracy topographic mapping.展开更多
The use of landscape covariates to variability of soil properties in similar estimate soil properties is not suitable topographic and vegetation conditions. for the areas of low relief due to the high A new method wa...The use of landscape covariates to variability of soil properties in similar estimate soil properties is not suitable topographic and vegetation conditions. for the areas of low relief due to the high A new method was implemented to map regional soil texture （in terms of sand, silt and clay contents） by hypothesizing that the change in the land surface diurnal temperature difference （DTD） is related to soil texture in case of a relatively homogeneous rainfall input. To examine this hypothesis, the DTDs from moderate resolution imagine spectroradiometer （MODIS） during a selected time period, i.e., after a heavy rainfall between autumn harvest and autumn sowing, were classified using fuzzy-c-means （FCM） clustering. Six classes were generated, and for each class, the sand （〉 0.05 mm）, silt （0.002-0.05 mm） and clay （〈 0.002 mm） contents at the location of maximum membership value were considered as the typical values of that class. A weighted average model was then used to digitally map soil texture. The results showed that the predicted map quite accurately reflected the regional soil variation. A validation dataset produced estimates of error for the predicted maps of sand, silt and clay contents at root mean of squared error values of 8.4%, 7.8% and 2.3%, respectively, which is satisfactory in a practical context. This study thus provided a methodology that can help improve the accuracy and efficiency of soil texture mapping in plain areas using easily available data sources.展开更多
基金funded by National Institute of Occupational Safety and Health (NIOSH) ground control group under the contract No. 211-2011-41138
文摘Measurement while drilling systems are becoming an important part of excavation operations for rock characterization and ground support design that require reliable information on rock strength and location ＆ frequency of joints or voids. This paper focuses on improving rock characterization algorithms for instrumented roof-boRer systems. For this purpose, an improved void detection algorithm is proposed, where the underlying theory is built upon the concept of mean change detection based on the feed pressure signals. In addition, the application of acoustic sensing for void detection is examined and it is shown that the variance of the filtered acoustic signal is correlated to the strength of the material being drilled. The proposed algorithm has been validated on the data collected from full-scale drilling tests in various concrete and rock samples at the J. H. Fletcher facility.
基金supported by the National Natural Science Foundation of China(Grant Nos.41472255,51178404)Open Research Fund by Sichuan Engineering Research Center for Emergency Mapping & Disaster Reduction(Program K2014B006)Fundamental Research Funds for the Central Universities(Grant Nos.SWJTU12ZT07,2682014BR014)
文摘One-sided ascending or descending Synthetic Aperture Radar（SAR） stereoradargrammetry has limited accuracy of topographic mapping due to the short spatial baseline（-100 km） and small intersection angle. In order to improve the performance and reliability of generating digital elevation model（DEM） from spaceborne SAR radargrammetry, an exploration of two-sided stereoradargrammetry from the combination of ascending and descending orbits with geometric configuration of long spatial baseline（-1000 km） was conducted in this study. The slant-range geometry between SAR sensors to the earth surface and the Doppler positioning equations were employed to establish the stereoscopic intersection model. The measurement uncertainty of two-sided radargrammetric elevation was estimated on the basis of radar parallax of homogeneous points between input SAR images. Two stereo-pairs of ALOS/PALSAR（Advanced Land Observing Satellite/Phased Array type L-band Synthetic Aperture Radar） acquisitions with the orbital separation almost 1080 km over the west Sichuan foreland basin with rolling topography in southwestern China were employed in the study to obtain the up-to-date terrain data after the 2008 Wenchuan earthquake that hit this area. Thequantitative accuracy assessment of two-sided radargrammetric DEM was performed with reference to field GPS observations. The experimental results show that the elevation accuracy reaches 5.5 m without ground control points（GCPs） used, and the accuracy is further improved to 1.5 m with only one GPS GCP used as the least constraint. The theoretical analysis and testing results demonstrate that the twosided long baseline SAR radargrammetry from the ascending and descending orbits can be a very promising technical alternative for large-area and high accuracy topographic mapping.
基金Supported by the Basic Research Program of Jiangsu Province,China (No. BK2008058)the Knowledge Innovation Program of Chinese Academy of Sciences (No. KZCX2-YW-409)
文摘The use of landscape covariates to variability of soil properties in similar estimate soil properties is not suitable topographic and vegetation conditions. for the areas of low relief due to the high A new method was implemented to map regional soil texture （in terms of sand, silt and clay contents） by hypothesizing that the change in the land surface diurnal temperature difference （DTD） is related to soil texture in case of a relatively homogeneous rainfall input. To examine this hypothesis, the DTDs from moderate resolution imagine spectroradiometer （MODIS） during a selected time period, i.e., after a heavy rainfall between autumn harvest and autumn sowing, were classified using fuzzy-c-means （FCM） clustering. Six classes were generated, and for each class, the sand （〉 0.05 mm）, silt （0.002-0.05 mm） and clay （〈 0.002 mm） contents at the location of maximum membership value were considered as the typical values of that class. A weighted average model was then used to digitally map soil texture. The results showed that the predicted map quite accurately reflected the regional soil variation. A validation dataset produced estimates of error for the predicted maps of sand, silt and clay contents at root mean of squared error values of 8.4%, 7.8% and 2.3%, respectively, which is satisfactory in a practical context. This study thus provided a methodology that can help improve the accuracy and efficiency of soil texture mapping in plain areas using easily available data sources.
