期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
离心式籽粒均布器的设计 被引量:1
1
作者 云超 朱瑞祥 +1 位作者 陈丽 张李娴 《农机化研究》 北大核心 2009年第2期104-106,共3页
籽粒均布器是千粒质量测试仪的重要组成部分,而千粒质量测试仪是选育优良品种过程中对种子进行评价必不可少的仪器。为此,设计了一种基于离心原理的籽粒均布器,从理论上推导出了实现籽粒均布的籽粒受力和通过性条件,确定了该系统结构参... 籽粒均布器是千粒质量测试仪的重要组成部分,而千粒质量测试仪是选育优良品种过程中对种子进行评价必不可少的仪器。为此,设计了一种基于离心原理的籽粒均布器,从理论上推导出了实现籽粒均布的籽粒受力和通过性条件,确定了该系统结构参数的数学模型,并对软件系统和关键电路进行了设计。该系统能够实现在计数区间内对籽粒进行计数称量,为千粒质量测试仪的成功研发奠定了坚实的基础。 展开更多
关键词 作物籽粒 均布器 离心式 设计
下载PDF
速度均布器均布原理的研究
2
作者 黄凤良 周彦煌 《化工设计通讯》 CAS 1999年第3期38-41,共4页
该文以速度比为衡量标准,详细阐述了截面收缩均布器、孔板均布器、收缩锥管均布器的均布原理,并通过调节实现各自均布的参数,得到相应的流体速度均布时所调参数的值,为工程上设计和选用合理的速度均布器奠定了基础。
关键词 速度 均布器 反应 化工生产 速度比
下载PDF
均布器对LNG绕管式换热器壳侧流体的影响 被引量:1
3
作者 汪耀龙 刘莲 +3 位作者 郑文科 郝泉禧 刘凯月 姜益强 《煤气与热力》 2022年第5期I0016-I0022,I0032,共8页
设计了绕管式换热器实验样件,搭建实验测量系统,以空气和水为工质,在有无均布器两种条件下,研究壳侧流体均布特性变化规律。实验结果表明:无均布器条件下,干度一定,随着总质量流量增大,单相离散系数无明显变化规律,在绝大多数工况下,两... 设计了绕管式换热器实验样件,搭建实验测量系统,以空气和水为工质,在有无均布器两种条件下,研究壳侧流体均布特性变化规律。实验结果表明:无均布器条件下,干度一定,随着总质量流量增大,单相离散系数无明显变化规律,在绝大多数工况下,两相离散系数小于单相离散系数;总质量流量一定,初始时气相离散系数大于液相离散系数,随着干度增大,气相离散系数逐渐减小,最后小于液相离散系数;两相离散系数随干度增大,先减小后增大。设置均布器后,干度一定,当总质量流量增大到一定程度时,随着总质量流量增大,单相和两相离散系数均逐渐减小;总质量流量一定,随着干度增大,液相和两相离散系数没有明显增大的趋势,均布器对液相流体和两相流体均布性能均有所提升。设置均布器后,实验的5种工况两相离散系数最大减小了17.79%。均布器对两相流体周向和径向均布性能均有所提升。 展开更多
关键词 绕管式换热 两相流 均布器 流量比例系数 离散系数
下载PDF
非均布热管换热器的流动及其传热性能 被引量:1
4
作者 钱淼 胡恒蝶 +2 位作者 向忠 马成章 胡旭东 《纺织学报》 EI CAS CSCD 北大核心 2021年第12期151-158,共8页
为降低热管换热器的流动阻力并增强其换热效率,提出一种水滴形非均布热管换热器结构。使用计算流体力学软件ANSYS Fluent对传统错排热管阵列、水滴形热管阵列及非均布水滴形热管阵列的换热性能展开数值模拟,得到了其在不同雷诺数下的努... 为降低热管换热器的流动阻力并增强其换热效率,提出一种水滴形非均布热管换热器结构。使用计算流体力学软件ANSYS Fluent对传统错排热管阵列、水滴形热管阵列及非均布水滴形热管阵列的换热性能展开数值模拟,得到了其在不同雷诺数下的努塞尔数、阻力系数以及综合换热性能指标的变化曲线。对比分析结果表明:相对于传统错排热管阵列,水滴形热管阵列有效传热面积较大,内部流体流动无涡出现,流动摩擦较小,具有更大的努塞尔数以及更小的阻力系数,综合换热性能指标更佳;通过非均布设计,水滴形热管阵列内的流动紊流度增加,努塞尔数变大,换热性能增加。 展开更多
关键词 热管换热 热管阵列 传热性能 数值模拟 设计 换热效率 余热回收
下载PDF
中速磨煤机前圆形一次风道流场模拟及优化设计 被引量:14
5
作者 梅振锋 陈敏 +3 位作者 徐妙锋 彭小敏 王小华 陈宝康 《热力发电》 CAS 北大核心 2016年第11期99-105,113,共8页
针对某大型燃煤电厂1 000MW机组锅炉中速磨煤机入口一次风量测量不准确、磨煤机一次风量控制无法自动投入的问题,采用CFD数值模拟设计了一套适用于磨煤机前圆形一次风道的冷热风混流及均流装置,并通过冷态物理模型实验对该装置的均流性... 针对某大型燃煤电厂1 000MW机组锅炉中速磨煤机入口一次风量测量不准确、磨煤机一次风量控制无法自动投入的问题,采用CFD数值模拟设计了一套适用于磨煤机前圆形一次风道的冷热风混流及均流装置,并通过冷态物理模型实验对该装置的均流性能进行了验证。结果表明:通过特殊设计的冷风均布器、导流板、格栅和均流板的组合布置,能够改善中速磨煤机前圆形一次风道内气流的扭转现象,使一次风测量截面处来流速度方向垂直于测风元件;推荐风速测量截面速度的相对标准差降至6%以下,温度的相对标准差降至2%以下,冷风和热风的压损增加保持在400Pa以内;实现了冷一次风在冷、热风交汇处的均匀分布。 展开更多
关键词 中速磨煤机 一次风 圆形风道 混流 冷态物理模型实验 均布器 导流板 格栅
下载PDF
岩土工程多功能模拟试验装置的研制及应用 被引量:51
6
作者 陈安敏 顾金才 +2 位作者 沈俊 明治清 张向阳 《岩石力学与工程学报》 EI CAS CSCD 北大核心 2004年第3期372-378,共7页
岩土工程多功能模拟试验装置由主机与配套装置组成,具有一机多用的特点。利用它可对洞室、洞群、边坡和基坑进行平面地质力学模型试验;对预应力锚索加固的岩体模拟试件进行抗剪强度试验;对混凝土或钢筋混凝土梁进行抗弯强度试验。它具... 岩土工程多功能模拟试验装置由主机与配套装置组成,具有一机多用的特点。利用它可对洞室、洞群、边坡和基坑进行平面地质力学模型试验;对预应力锚索加固的岩体模拟试件进行抗剪强度试验;对混凝土或钢筋混凝土梁进行抗弯强度试验。它具有双向旋转功能,可使模型平面旋转360°,立面旋转35°。由于采用了首次研制成功的活塞式均布压力加载器加载,可在模型块体内产生大范围的均匀应变场,可对模型边界施加均布荷载和阶梯形荷载,并能满足不同侧压系数的要求。在剪切试验中可给出t-u全过程曲线等。6次工程试验结果表明,该装置具有良好的力学性能,可满足大型岩土工程试验研究的需要。 展开更多
关键词 岩土工程 模型试验 加载装置 压力加载 地质力学模型
下载PDF
Fuzzy logic controller design with unevenly-distributed membership function for high performance chamber cooling system 被引量:2
7
作者 曹健鹏 Seok-Kwon Jeong Young-Mi Jung 《Journal of Central South University》 SCIE EI CAS 2014年第7期2684-2692,共9页
Fuzzy logic controller adopting unevenly-distributed membership function was presented with the purpose of enhancing performance of the temperature control precision and robustness for the chamber cooling system.Histo... Fuzzy logic controller adopting unevenly-distributed membership function was presented with the purpose of enhancing performance of the temperature control precision and robustness for the chamber cooling system.Histogram equalization and noise detection were performed to modify the evenly-distributed membership functions of error and error change rate into unevenly-distributed membership functions.Then,the experimental results with evenly and unevenly distributed membership functions were compared under the same outside environment conditions.The experimental results show that the steady-state error is reduced around 40% and the noise disturbance is rejected successfully even though noise range is 60% of the control precision range.The control precision is improved by reducing the steady-state error and the robustness is enhanced by rejecting noise disturbance through the fuzzy logic controller with unevenly-distributed membership function.Moreover,the system energy efficiency and lifetime of electronic expansion valve(EEV) installed in chamber cooling system are improved by adopting the unevenly-distributed membership function. 展开更多
关键词 chamber cooling system fuzzy logic controller unevenly-distributed membership function steady-state error reduction ROBUSTNESS variable speed refrigeration system
下载PDF
RELOCATION ALGORITHM FOR NON-UNIFORM DISTRIBUTION IN MOBILE SENSOR NETWORK 被引量:1
8
作者 Pei Zhiqiang Xu Changqing Teng Jing 《Journal of Electronics(China)》 2009年第2期222-228,共7页
Energy is the determinant factor for the survival of Mobile Sensor Networks(MSN).Based on the analysis of the energy distribution in this paper,a two-phase relocation algorithm is proposed based on the balance between... Energy is the determinant factor for the survival of Mobile Sensor Networks(MSN).Based on the analysis of the energy distribution in this paper,a two-phase relocation algorithm is proposed based on the balance between the energy provision and energy consumption distribution.Our main objectives are to maximize the coverage percentage and to minimize the total distance of node movements.This algorithm is designed to meet the requirement of non-uniform distribution network applications,to extend the lifetime of MSN and to simplify the design of the routing protocol.In ad-dition,test results show the feasibility of our proposed relocation algorithm. 展开更多
关键词 Mobile Sensor Networks(MSN) Energy balance Energy distribution Non-uniform distribution
下载PDF
Study on the spectral response of fiber Bragg grating sensor under non-uniform strain distribution in structural health monitoring 被引量:20
9
作者 黄红梅 袁慎芳 《Optoelectronics Letters》 EI 2011年第2期109-112,共4页
Many theoretical studies have been developed to study the spectral response of a fiber Bragg grating (FBG) under non-uniform strain distribution along the length of FBG in recent years. However, almost no experiments ... Many theoretical studies have been developed to study the spectral response of a fiber Bragg grating (FBG) under non-uniform strain distribution along the length of FBG in recent years. However, almost no experiments were designed to obtain the evolution of the spectrum when a FBG is subjected to non-uniform strain. In this paper, the spectral responses of a FBG under non-uniform strain distributions are given and a numerical simulation based on the Runge-Kutta method is introduced to investigate the responses of the FBG under some typical non-uniform transverse strain fields, including both linear strain gradient and quadratic strain field. Experiment is carried out by using loads applied at different locations near the FBG. Good agreements between experimental results and numerical simulations are obtained. 展开更多
关键词 Computer simulation EXPERIMENTS Fiber Bragg gratings Fiber optic components Fiber optic sensors Numerical methods Runge Kutta methods Structural health monitoring
原文传递
Two-dimensional finite element model to study temperature distribution in peripheral regions of extended spherical human organs involving uniformly perfused tumors 被引量:1
10
作者 Akshara Makrariya Neeru Adlakha 《International Journal of Biomathematics》 2015年第6期57-86,共30页
Temperature as an indicator of tissue response is widely used in clinical applications. In view of above a problem of temperature distribution in peripheral regions of extended spherical organs of a human body like, h... Temperature as an indicator of tissue response is widely used in clinical applications. In view of above a problem of temperature distribution in peripheral regions of extended spherical organs of a human body like, human breast involving uniformly perfused tumor is investigated in this paper. The human breast is assumed to be spherical in shape with upper hemisphere projecting out from the trunk of the body and lower hemisphere is considered to be a part of the body core. The outer surface of the breast is assumed to be exposed to the environment from where the heat loss takes place by conduction, convection, radiation and evaporation. The heat transfer from core to the surface takes place by thermal conduction and blood perfusion. Also metabolic activity takes place at different rates in different layers of the breast. An elliptical-shaped tumor is assumed to be present in the dermis region of human breast. A finite element model is developed for a two-dimensional steady state case incorporating the important parameters like blood flow, metabolic activity and thermal conductivity. The triangular ring elements are employed to discretize the region. Appropriate boundary conditions are framed using biophysical conditions. The numerical results are used to study the effect of tumor on temperature distribution in the region. 展开更多
关键词 Thermal conductivity triangular ring element uniformly perfused tumor metabolic heat generation.
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部