Drop-weight impact tests were conducted on 2024-T3 aluminum plates with five types of impactors, and then the effects of the dent on the residual ultimate strength of the 2024-T3 specimens were investigated through ax...Drop-weight impact tests were conducted on 2024-T3 aluminum plates with five types of impactors, and then the effects of the dent on the residual ultimate strength of the 2024-T3 specimens were investigated through axial compression tests. Results indicate that with increase in dent depth, the five types of dents affect the ultimate strength of the plate in different trends. Nevertheless, other than the plate global deflection caused by impacting, the dent itself has unremarkable effect on the ultimate strength. The mathematical expressions are derived regarding the relationship between impact energy factor and the dent depth factor as well as the compressive ultimate strength reduction rate and the dent depth factor.展开更多
The influences of intense magnetic pinch effect caused by electromagnetic field with high frequency on discharge channel expansion and plasma configuration change are discussed. The change of Lorentz force exerting on...The influences of intense magnetic pinch effect caused by electromagnetic field with high frequency on discharge channel expansion and plasma configuration change are discussed. The change of Lorentz force exerting on charged particles in discharge channel is calculated under the electromagnetic field with high frequency. Through the theoretical analysis and experimental study, the forming process of discharge channel is conjectured. And it is considered that the changes of discharge channel, such as the decrease of diameter and increase of energy density, coming from the intense magnetic pinch effect in high frequency electromagnetic field, are the main reasons for a series of special phenomena on the machined surface in micro EDM.展开更多
Heat transfer enhancement in vertical tubes plays an important role on the thermal performance of many heat exchangers and thermal devices.In this work,laminar mixed convection of airflow in a vertical dimpled tube wa...Heat transfer enhancement in vertical tubes plays an important role on the thermal performance of many heat exchangers and thermal devices.In this work,laminar mixed convection of airflow in a vertical dimpled tube was numerically investigated.Three-dimensional elliptical governing equations were solved using the finite-volume technique.For a given dimpled pitch,the effects of three different dimple heights(h/D=0.013,0.027,0.037) have been studied at different Richardson numbers(0.1,1.0 and 1.5).The generated vortex in the vicinity of the dimple destructs the thermal boundary layer and enhances the heat transfer.Therefore,lower wall temperature is seen where the dimples are located.Fluid flow velocity at the near-wall region significantly increases because of buoyancy forces with the increase of Richardson numbers.Such an acceleration at the near-wall region makes the dimples more effective at higher Richardson number.Using a dimpled tube enhances the heat transfer coefficient.However,the pressure drop is not important.For instance,in the case of Ri=1.5 and h/D=0.037,20% gains in the heat transfer enhancement only costs2.5% in the pressure loss.In general,it is recommended using a dimpled tube where the effects of buoyancy forces are important.展开更多
Patterning ultrathin MoS2 layers with regular edges or controllable shapes is appealing since the properties of MoS2 sheets are sensitive to the edge structures. In this work, we have introduced a simple, effective an...Patterning ultrathin MoS2 layers with regular edges or controllable shapes is appealing since the properties of MoS2 sheets are sensitive to the edge structures. In this work, we have introduced a simple, effective and well-controlled technique to etch layered MoS2 sheets with well-oriented equilateral triangular pits by simply heating the samples in air. The anisotropic oxidative etching is greatly affected by the surrounding temperature and the number of MoS2 layers, whereby the pit sizes increase with the increase of surrounding temperature and the number of MoS2 layers. First-principles computations have been performed to explain the formation mechanism of the triangular pits. This technique offers an alternative avenue to engineering the structure of MoS2 sheets.展开更多
A correlation study between the observed surface morphology using high-resolution scanning electron microscopy(HRSEM) and the observed structural imperfections using transmission electron microscopy(TEM) has been cond...A correlation study between the observed surface morphology using high-resolution scanning electron microscopy(HRSEM) and the observed structural imperfections using transmission electron microscopy(TEM) has been conducted for a-plane Ga N. There are three different sized asymmetric surface pits: large pit of 500 nm–2 ?m in side length, medium pit of 50 nm in side length, and small pit with side lengths of less than 5 nm, which originate from incomplete island coalescence, screw dislocation, and partial dislocation(PD), respectively. Both screw dislocation and PD can produce pits on the free surface because they have a perpendicular line tension to the surface, which must remain in balance with the surface tension. The two types of dislocation lead to distinctive pit sizes because the PD has a smaller Burgers vector component along the dislocation line than the pure screw dislocation. A pit that is produced in the island-coalescing process is much larger than those caused by dislocations because island coalescence is a kinetic process that involves large-scale mass transportation, whereas the dislocation mediates the surface in the local area. These three types of surface pits sometimes interact with one another in space. The coalescence of the island determines the surface morphology at large scales, whereas the defects affect the details.展开更多
基金Projects(13R21421700,13R21421800)sponsored by Shanghai Postdoctoral Scientific Program,China
文摘Drop-weight impact tests were conducted on 2024-T3 aluminum plates with five types of impactors, and then the effects of the dent on the residual ultimate strength of the 2024-T3 specimens were investigated through axial compression tests. Results indicate that with increase in dent depth, the five types of dents affect the ultimate strength of the plate in different trends. Nevertheless, other than the plate global deflection caused by impacting, the dent itself has unremarkable effect on the ultimate strength. The mathematical expressions are derived regarding the relationship between impact energy factor and the dent depth factor as well as the compressive ultimate strength reduction rate and the dent depth factor.
基金Supported by the National Natural Science Foundation of China(50635040)~~
文摘The influences of intense magnetic pinch effect caused by electromagnetic field with high frequency on discharge channel expansion and plasma configuration change are discussed. The change of Lorentz force exerting on charged particles in discharge channel is calculated under the electromagnetic field with high frequency. Through the theoretical analysis and experimental study, the forming process of discharge channel is conjectured. And it is considered that the changes of discharge channel, such as the decrease of diameter and increase of energy density, coming from the intense magnetic pinch effect in high frequency electromagnetic field, are the main reasons for a series of special phenomena on the machined surface in micro EDM.
文摘Heat transfer enhancement in vertical tubes plays an important role on the thermal performance of many heat exchangers and thermal devices.In this work,laminar mixed convection of airflow in a vertical dimpled tube was numerically investigated.Three-dimensional elliptical governing equations were solved using the finite-volume technique.For a given dimpled pitch,the effects of three different dimple heights(h/D=0.013,0.027,0.037) have been studied at different Richardson numbers(0.1,1.0 and 1.5).The generated vortex in the vicinity of the dimple destructs the thermal boundary layer and enhances the heat transfer.Therefore,lower wall temperature is seen where the dimples are located.Fluid flow velocity at the near-wall region significantly increases because of buoyancy forces with the increase of Richardson numbers.Such an acceleration at the near-wall region makes the dimples more effective at higher Richardson number.Using a dimpled tube enhances the heat transfer coefficient.However,the pressure drop is not important.For instance,in the case of Ri=1.5 and h/D=0.037,20% gains in the heat transfer enhancement only costs2.5% in the pressure loss.In general,it is recommended using a dimpled tube where the effects of buoyancy forces are important.
文摘Patterning ultrathin MoS2 layers with regular edges or controllable shapes is appealing since the properties of MoS2 sheets are sensitive to the edge structures. In this work, we have introduced a simple, effective and well-controlled technique to etch layered MoS2 sheets with well-oriented equilateral triangular pits by simply heating the samples in air. The anisotropic oxidative etching is greatly affected by the surrounding temperature and the number of MoS2 layers, whereby the pit sizes increase with the increase of surrounding temperature and the number of MoS2 layers. First-principles computations have been performed to explain the formation mechanism of the triangular pits. This technique offers an alternative avenue to engineering the structure of MoS2 sheets.
基金supported by the National Natural Science Foundation of China(Grant Nos.11204009&61204011)Beijing Municipal Natural Science Foundation(Grant No.4142005)
文摘A correlation study between the observed surface morphology using high-resolution scanning electron microscopy(HRSEM) and the observed structural imperfections using transmission electron microscopy(TEM) has been conducted for a-plane Ga N. There are three different sized asymmetric surface pits: large pit of 500 nm–2 ?m in side length, medium pit of 50 nm in side length, and small pit with side lengths of less than 5 nm, which originate from incomplete island coalescence, screw dislocation, and partial dislocation(PD), respectively. Both screw dislocation and PD can produce pits on the free surface because they have a perpendicular line tension to the surface, which must remain in balance with the surface tension. The two types of dislocation lead to distinctive pit sizes because the PD has a smaller Burgers vector component along the dislocation line than the pure screw dislocation. A pit that is produced in the island-coalescing process is much larger than those caused by dislocations because island coalescence is a kinetic process that involves large-scale mass transportation, whereas the dislocation mediates the surface in the local area. These three types of surface pits sometimes interact with one another in space. The coalescence of the island determines the surface morphology at large scales, whereas the defects affect the details.
