In order to investigate the influence of intermediate principal stress on the stress-strain and strength behaviour of a coarse-grained soil, a series of true triaxial tests were performed. The tests were conducted in ...In order to investigate the influence of intermediate principal stress on the stress-strain and strength behaviour of a coarse-grained soil, a series of true triaxial tests were performed. The tests were conducted in a recently developed true triaxial apparatus with constant minor principal stress σ3 and constant value of intermediate principal stress ratio b=（σ2-σ3）/（σ1-σ3） （al is the vertical stress, and % is the horizontal stress）. It is found that the intermediate principal strain, ε2, increases from negative to positive value with the increase of parameter b from zero to unity under a constant minor principal stress. The minor principal strain, ε3, is always negative. This implies that the specimen exhibits an evident anisotropy. The relationship between b and friction angle obtained from the tests is different from that predicted by LADE-DUNCAN and MATSUOKA-NAKAI criteria. Based on the test results, an empirical equation of g（b） that is the shape function of the failure surface on re-plane was presented. The proposed equation is verified to be reasonable by comparing the predicted results using the equation with true triaxial test results of soils, such as coarse-grained soils in this study, sands and gravels in other studies.展开更多
In order to explore the influence of coal mining disturbance on the rockburst occurring in fault zone, this research constructed a mechanical model for the evolution of fault stress, and analyzed the influence of the ...In order to explore the influence of coal mining disturbance on the rockburst occurring in fault zone, this research constructed a mechanical model for the evolution of fault stress, and analyzed the influence of the ratio of horizontal stress to vertical stress on the stability of fault, and the spatial distribution of the stress in fault zone as well as its evolution rule. Furthermore, the rockburst danger at different spatial areas of fault zone was predicated. Results show that: when both sides of the working face are mined out, the fault zone in the working face presents greater horizontal and vertical stresses at its boundaries but exhibits smaller stresses in its middle section; however, the ratio of horizontal stress to vertical stress is found to be greater at middle section and smaller at boundaries. As the working face advances towards the fault, the horizontal and vertical stresses of the fault firstly increases and then decreases; conversely,the ratio of horizontal stress to vertical stress keeps decreasing all the time. Therefore, if the fault zones are closer to the goaf and the coal wall, the stress ratio will be smaller, and the fault slip will be more prone to occur, therefore rockburst danger will be greater. This research results provide guidance for the rockburst prevention and hazard control of the coal mining in fault zone.展开更多
A new analytical study on stresses around a post-tensioned anchor in rocks with two perpendicular joint sets is presented. The assumptions of orthotropic elastic rock with plane strain conditions are made in derivatio...A new analytical study on stresses around a post-tensioned anchor in rocks with two perpendicular joint sets is presented. The assumptions of orthotropic elastic rock with plane strain conditions are made in derivation of the formulations. A tri-linear bond-slip constitutive law is used for modeling the tendon-grout interface behavior and debonding of this interface. The bearing plate width is also considered in the analysis. The obtained solutions are in the integral forms and numerical techniques that have been used for evaluation. In the illustrative example given, the major principal stress is compressive in the anchor free zone and compressive stress concentrations of 815 k Pa and 727 k Pa(for the anchor load of 300 k N) are observed under the bearing plate and the bond length proximal end, respectively. However, large values of tensile stresses with the maximum of-434 k Pa are formed at the bond length distal end. The results obtained using the proposed solution are compared very those of numerical method(FEM).展开更多
It is considered thai the damage of the underground structures caused by earthquakes is minor for a long time. However, the catastrophic damages induced by several recent earthquakes （e. g. Kobe earthquake in 1995 ）...It is considered thai the damage of the underground structures caused by earthquakes is minor for a long time. However, the catastrophic damages induced by several recent earthquakes （e. g. Kobe earthquake in 1995 ） revealed that the study on the dynamic properties of the underground structures is indispensable. The dynamic behavior and damage mechanism of underground structure are analyzed by using shaking table tests （ both shallow-and deep-buried） and numerical simulation （3D FEM） including horizontal and vertical input motions, individually and simultaneously. From the results, the underground structure collapsed due to strong horizontal forces although vertical deformation is not negligible. The vertical excitation increases the response of structure, especially the stress and shear stress at the upper section; the soil influenced the property of soilstructure system. In the same excitation, the response in shallow-buried test is larger than deep case. Both overburden and vertical earthquake play important roles in the response of structure and those are two critical aspects in the design of the large-span underground structures, such as subway stations.展开更多
The objective of this study was to develop, as well as validate the strongly coupled method (two-way fluid structural interaction (FSI)) used to simulate the transient FSI response of the vertical axis tidal turbine (...The objective of this study was to develop, as well as validate the strongly coupled method (two-way fluid structural interaction (FSI)) used to simulate the transient FSI response of the vertical axis tidal turbine (VATT) rotor, subjected to spatially varying inflow. Moreover, this study examined strategies on improving techniques used for mesh deformation that account for large displacement or deformation calculations. The blade's deformation for each new time step is considered in transient two-way FSI analysis, to make the design more reliable. Usually this is not considered in routine one-way FSI simulations. A rotor with four blades and 4-m diameter was modeled and numerically analyzed. We observed that two-way FSI, utilizing the strongly coupled method, was impossible for a complex model; and thereby using ANSYS-CFX and ANSYS-MECHANICAL in work bench, as given in ANSYS-WORKBENCH, helped case examples 22 and 23, by giving an error when the solution was run. To make the method possible and reduce the computational power, a novel technique was used to transfer the file in ANSYS-APDL to obtain the solution and results. Consequently, the results indicating a two-way transient FSI analysis is a time- and resource-consuming job, but with our proposed technique we can reduce the computational time. The ANSYS STRUCTURAL results also uncover that stresses and deformations have higher values for two-way FSI as compared to one-way FSI. Similarly, fluid flow CFX results for two-way FSI are closer to experimental results as compared to one-way simulation results. Additionally, this study shows that, using the proposed method we can perform coupled simulation with simple multi-node PCs (core i5).展开更多
Strain engineering is a powerful tool to tailor the physical properties of materials coherently stacked in an epitaxial heterostructure. Such an approach, applied to the mature field of planar heteroepitaxy, has yield...Strain engineering is a powerful tool to tailor the physical properties of materials coherently stacked in an epitaxial heterostructure. Such an approach, applied to the mature field of planar heteroepitaxy, has yielded a variety of new phenomena and devices. Recently, heteroepitaxial vertically aligned nanocomposites have emerged as alternatives to planar structures. Owing to the peculiar geometry of such nanoarchitectures, efficient strain control can be achieved, opening the way to novel functionalities. In this paper, we report a very large tensile axial strain in epitaxial transition metal nanowires embedded in an oxide matrix. We show that axial strains in excess of 1.5% can be sustained over a large thickness （a few hundred nanometers） in epitaxial nanowires having ultrasmall diameters （-3-6 nm）. The axial strain depends on the diameter of the nanowires, reflecting its epitaxial nature and the balance of interface and elastic energies. Furthermore, it is experimentally shown that such strain is metastable, in agreement with the calculations performed in the framework of the Frenkel-Kontorova model. The diameter dependence and metastability provide effective ways to control the strain, an appealing feature for the design of functional nanoarchitectures.展开更多
基金Project(50639050) supported by the National Natural Science Foundation of China and Er-Tan Hydraulicpower Limited CompanyProject(50579014) supported by the National Natural Science Foundation of China+3 种基金Project(09KJD560003) supported by the Natural Science Foundation of Jiangsu Higher Education Institutions of ChinaProject(BK2007582) supported by Jiangsu Provincial Natural Science Foundation of ChinaProject(20070294002) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of ChinaProject(GH200904) supported by Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering,Hohai University,China
文摘In order to investigate the influence of intermediate principal stress on the stress-strain and strength behaviour of a coarse-grained soil, a series of true triaxial tests were performed. The tests were conducted in a recently developed true triaxial apparatus with constant minor principal stress σ3 and constant value of intermediate principal stress ratio b=（σ2-σ3）/（σ1-σ3） （al is the vertical stress, and % is the horizontal stress）. It is found that the intermediate principal strain, ε2, increases from negative to positive value with the increase of parameter b from zero to unity under a constant minor principal stress. The minor principal strain, ε3, is always negative. This implies that the specimen exhibits an evident anisotropy. The relationship between b and friction angle obtained from the tests is different from that predicted by LADE-DUNCAN and MATSUOKA-NAKAI criteria. Based on the test results, an empirical equation of g（b） that is the shape function of the failure surface on re-plane was presented. The proposed equation is verified to be reasonable by comparing the predicted results using the equation with true triaxial test results of soils, such as coarse-grained soils in this study, sands and gravels in other studies.
基金Financial support for this work,provided by the National Natural Science Foundation of China(Nos.51104150,51204165,51404243)the Twelfth Five-Year National Science and Technology Support Program of China(No.2012BAK09B01)the Priority Academic Program Development of Jiangsu Higher Education Institutions of China,are gratefully acknowledged
文摘In order to explore the influence of coal mining disturbance on the rockburst occurring in fault zone, this research constructed a mechanical model for the evolution of fault stress, and analyzed the influence of the ratio of horizontal stress to vertical stress on the stability of fault, and the spatial distribution of the stress in fault zone as well as its evolution rule. Furthermore, the rockburst danger at different spatial areas of fault zone was predicated. Results show that: when both sides of the working face are mined out, the fault zone in the working face presents greater horizontal and vertical stresses at its boundaries but exhibits smaller stresses in its middle section; however, the ratio of horizontal stress to vertical stress is found to be greater at middle section and smaller at boundaries. As the working face advances towards the fault, the horizontal and vertical stresses of the fault firstly increases and then decreases; conversely,the ratio of horizontal stress to vertical stress keeps decreasing all the time. Therefore, if the fault zones are closer to the goaf and the coal wall, the stress ratio will be smaller, and the fault slip will be more prone to occur, therefore rockburst danger will be greater. This research results provide guidance for the rockburst prevention and hazard control of the coal mining in fault zone.
文摘A new analytical study on stresses around a post-tensioned anchor in rocks with two perpendicular joint sets is presented. The assumptions of orthotropic elastic rock with plane strain conditions are made in derivation of the formulations. A tri-linear bond-slip constitutive law is used for modeling the tendon-grout interface behavior and debonding of this interface. The bearing plate width is also considered in the analysis. The obtained solutions are in the integral forms and numerical techniques that have been used for evaluation. In the illustrative example given, the major principal stress is compressive in the anchor free zone and compressive stress concentrations of 815 k Pa and 727 k Pa(for the anchor load of 300 k N) are observed under the bearing plate and the bond length proximal end, respectively. However, large values of tensile stresses with the maximum of-434 k Pa are formed at the bond length distal end. The results obtained using the proposed solution are compared very those of numerical method(FEM).
文摘It is considered thai the damage of the underground structures caused by earthquakes is minor for a long time. However, the catastrophic damages induced by several recent earthquakes （e. g. Kobe earthquake in 1995 ） revealed that the study on the dynamic properties of the underground structures is indispensable. The dynamic behavior and damage mechanism of underground structure are analyzed by using shaking table tests （ both shallow-and deep-buried） and numerical simulation （3D FEM） including horizontal and vertical input motions, individually and simultaneously. From the results, the underground structure collapsed due to strong horizontal forces although vertical deformation is not negligible. The vertical excitation increases the response of structure, especially the stress and shear stress at the upper section; the soil influenced the property of soilstructure system. In the same excitation, the response in shallow-buried test is larger than deep case. Both overburden and vertical earthquake play important roles in the response of structure and those are two critical aspects in the design of the large-span underground structures, such as subway stations.
基金supported by the National Natural Science Foundation of China (Nos. 51209060 and 51106034)the ‘111’ Project Foundation from Ministry of Education and State Administration of Foreign Experts Affairs (No. B07019), Chinathe National Special Foundation for Ocean Energy (No. GHME2010CY01)
文摘The objective of this study was to develop, as well as validate the strongly coupled method (two-way fluid structural interaction (FSI)) used to simulate the transient FSI response of the vertical axis tidal turbine (VATT) rotor, subjected to spatially varying inflow. Moreover, this study examined strategies on improving techniques used for mesh deformation that account for large displacement or deformation calculations. The blade's deformation for each new time step is considered in transient two-way FSI analysis, to make the design more reliable. Usually this is not considered in routine one-way FSI simulations. A rotor with four blades and 4-m diameter was modeled and numerically analyzed. We observed that two-way FSI, utilizing the strongly coupled method, was impossible for a complex model; and thereby using ANSYS-CFX and ANSYS-MECHANICAL in work bench, as given in ANSYS-WORKBENCH, helped case examples 22 and 23, by giving an error when the solution was run. To make the method possible and reduce the computational power, a novel technique was used to transfer the file in ANSYS-APDL to obtain the solution and results. Consequently, the results indicating a two-way transient FSI analysis is a time- and resource-consuming job, but with our proposed technique we can reduce the computational time. The ANSYS STRUCTURAL results also uncover that stresses and deformations have higher values for two-way FSI as compared to one-way FSI. Similarly, fluid flow CFX results for two-way FSI are closer to experimental results as compared to one-way simulation results. Additionally, this study shows that, using the proposed method we can perform coupled simulation with simple multi-node PCs (core i5).
文摘Strain engineering is a powerful tool to tailor the physical properties of materials coherently stacked in an epitaxial heterostructure. Such an approach, applied to the mature field of planar heteroepitaxy, has yielded a variety of new phenomena and devices. Recently, heteroepitaxial vertically aligned nanocomposites have emerged as alternatives to planar structures. Owing to the peculiar geometry of such nanoarchitectures, efficient strain control can be achieved, opening the way to novel functionalities. In this paper, we report a very large tensile axial strain in epitaxial transition metal nanowires embedded in an oxide matrix. We show that axial strains in excess of 1.5% can be sustained over a large thickness （a few hundred nanometers） in epitaxial nanowires having ultrasmall diameters （-3-6 nm）. The axial strain depends on the diameter of the nanowires, reflecting its epitaxial nature and the balance of interface and elastic energies. Furthermore, it is experimentally shown that such strain is metastable, in agreement with the calculations performed in the framework of the Frenkel-Kontorova model. The diameter dependence and metastability provide effective ways to control the strain, an appealing feature for the design of functional nanoarchitectures.
