COS支持蛇型艺廊公园之夜2013

近日，COS宣布今夏与享誉世界的蛇型艺廊（SerpentineGallery）合作，并通过赞助蛇型艺廊公园之夜系列的举动，表明将继续大力支持艺术与创意。

千姿百态的造型艺菊

菊花由于整枝方法的不同，栽培方法也不一样。一般可分为：独本菊；多头菊；大立菊；塔菊及悬崖菊。现分别简介如下：

红木家具精品的标准“型艺材韵”

红木家具和仿古家具的保值增值，需要建立在“精品红木家具”的基础上。

中国兰花优质品种评价研究

对中国兰花的优质品种从花艺、叶艺、型艺三个方而提出了评价标准．

Variable-based Ramberg-Osgood constitutive model of power spinning bushing

The influences of power spinning process parameters on the mechanical properties of spinning parts were analyzed with an SXD100/3-CNC numerical control power spinning machine.The unidirectional tensile tests were carried out.Based on the experimental data,a ternary quadratic regression equation was established by orthogonal experiment.The Ramberg-Osgood constitutive model of tin-bronze connecting rod bushing was obtained.Referred to the constitutive relation of macroscopic incremental,the incremental elastoplastic constitutive relation of spinning parts was deduced based on the Mises yield criterion and kinematic hardening model.The results can be applied to the elastoplastic analysis in finite element numerical simulation.

Differentiation of Barley Genotypes with High Phosphorus Efficiency under Low Phosphorus Stress

[Objective] This study aimed to investigate differences in phosphorus effi-ciency between two-rowed barley and multiple-rowed barley and differences in phos-phorus efficiency among various agronomic traits, and to explore the relationship be-tween agronomic traits and row type with phosphorus efficiency. [Method] Under available phosphorus mass fractions of 1.32 and 36.6 mg/kg, 172 barley varieties, including 79 two-rowed foreign barley, 22 multiple-rowed foreign barley, 58 two-rowed Chinese barley and 13 multiple-rowed Chinese barley, were selected to com-pare differences in phosphorus efficiency-related agronomic traits. Plant height, spike length, number of unfil ed grains, number of unfil ed grains, main panicle weight, to-tal panicle weight, total stem weight, weight of aerial part and heading stage were surveyed for statistical analysis. [Result] The results showed that, various agronomic traits were larger under fertilization condition than under non-fertilization condition ex-cept number of unfil ed grains and heading stage. Plant high, spike length, weight of aerial part and heading stage varied greatly under non-fertilization condition; number of fil ed grains, number of unfil ed grains and total stem weight varied greatly under fertilization condition. In two-rowed barley, plant height and number of fil ed grains of Chinese varieties were higher than those of foreign varieties, while other agronomic traits such as spike length, number of unfil ed grains, main panicle weight, total panicle weight, total stem weight, weight of aerial part and heading stage of foreign varieties were higher than those of Chinese varieties. Spike length and weight of aerial part in multiple-rowed and two-rowed foreign barley were higher than those in Chinese barley. In multiple-rowed barley, plant height, number of unfil ed grains, total panicle weight and total stem weight of foreign varieties were higher under non-fer-tilization condition and lower under fertilization condition compared with those of Chi-nese varieties; number of fil ed grains, main panicle weight and heading stage of foreign varieties were lower under non-fertilization condition and higher under fertil-ization condition compared with those of Chinese varieties. [Conclusion] Heading stage, number of fil ed grains, number of unfil ed grains and total stem weight are more sensitive to phosphorus efficiency. Multiple-rowed barley is more sensitive to phosphorus efficiency than two-rowed barley.

Analysis on Combining Ability and Heritability of the Main Agronomic Characters for JA CMS in Brassica napus L.

Fifteen combinations crossed by five JA cytoplasmic male sterile lines （A1, A2, A3, A4, A5） and three restoring lines （R1, R2, R3） were selected to analyze the combining ability and heritability of nine main agronomic characters of Brassica na-pus L. to definite the application potential of these parent materials. The result showed that （i） the general combining ability （GCA） of male parents was R3＆gt;R2＆gt;R1 and that of female parents was A4＆gt;A1＆gt;A2＆gt;A5＆gt;A3; （i ） the special combining ability （SCA） of A2＆#215;R3 in plant height, number of branches, number of pods per plant and yield per plant was the best. The yield per plant of A2＆#215;R3, A1＆#215;R1 and A2＆#215;R1 ranked the first three places in the 15 combinations; （i i） the broad heritability of yield per plant was the highest, and that of the height of branches was the lowest. The com-prehensive characters of R3, A2 and A4 were better, which could be used to create new materials; （iv） good offspring were more likely to be chosen from the combina-tion with higher parental GCA, so the GCA and SCA should be considered com-prehensively when choosing parent and determining the optimal combinations.

Molecular Markers and Agronomic Traits of a New Kind of Genic Male Sterile Material Mian 7AB-4-2 in Brassica napus L.

[ Objective] The study was to investigate the agronomic traits and breeding characteristics of genic male sterile material Mian 7AB-4- 2 in Brassica napus. [ Method] The differences in agronomic traits and polymorphisms in SSR markers, between the genic male sterile material Mian 7AB-4-2 in Brassica napus and its sisterly line Mian 7AB-4-1 were investigated by hybridization and molecular identification; and the percentage of sterile individuals of Mian 7AB-4-2 and of the hybrids with its sisterly line Mian 7AB-4-1 from test cross and back cross were also studled. [ Result] Mian 7AB-4-2 was not significantly different in agronomic traits from its sisterly line Mian 7AB-4-1 at 0.05 probability level. The per- centages of sterile individuals in the pollinated fertile Mian 7AB-4-2 plants were over 60%, and that in its sisterly line Mian 7AB-4-1 was about 25%. In test crosses with other nine sterile lines, Mian 7AB-4-1 kept the percentage of sterile individuals of sterile lines over 90%, and the percentage of sterile individuals from back cross over 80%. With regard to molecular markers, Mian 7AB-4-2 and its sisterly line Mian 7AB-4-1 were different in the band number from SSR primers a2 and E10. [ Conclusion] The results indicate that Mian 7AB-4-2 is helpful for rapeseed breeding, quickening the application of new materials in field breeding.

STUDY OF FLOW AND TEMPERATURE IN RESIN TRANSFER MOLDING PROCESS BY NUMERICAL MODEL

A mathematical model of resin flow and temperature variation in the filling stage of the resin transfer molding (RTM) is developed based on the control volume/finite element method (CV/FEM). The effects of the heat transfer and chemical reaction of the resin on the flow and temperature are considered. The numerical algorithm of the resin flow and temperature variation in the process of RTM are studied. Its accuracy and convergence are analyzed. The comparison of temperature variations between experimental results and model predictions is carried out for two RTM cases. Result shows that the model is efficient for evaluating the flow and temperature variation in the filling stage of RTM and there is a good coincidence between theory and experiment.

Distributed amplifier of L-type network with 2-μm GaAs HBT process

The characteristic impedances of L-type and T-type networks are first investigated for a distributed amplifier design.The analysis shows that the L-type network has better frequency characteristics than the T-type one.A distribution amplifier based on the L-type network is implemented with the 2-μm GaAs HBT（heterojunction-bipolar transistor） process of WIN semiconductors.The measurement result presents excellent bandwidth performance and gives a gain of 5.5 dB with a gain flatness of ±1dB over a frequency range from 3 to 18 GHz.The return losses S11 and S22 are below-10dB in the designed frequency range.The output 1-dB compression point at 5 GHz is 13.3 dBm.The chip area is 0.95 mm2 and the power dissipation is 95 mW under a 3.5 V supply.

Effects of Genotype and Planting Density on Agronomic Traits and Storage Root of Sweetpotato

The effects ol different genotypes and planting densities on main agronomic traits, storage root traits and yield were studied with 6 high-quality sweetpotato varieties as study objects by 2-factor completely random design. The results showed that there were significant differences in stem diameter, length of the longest vine and top/root （T/R） between different genotypes, T/R differed significantly under dif- ferent planting densities, and number of basal branches decreased with planting density increasing. Genotype and genotype x density showed significant or very sig- nificant effects on fresh root yield per plant, dry matter content and fresh root yield per hectare, fresh root yield per plant gradually decreased with planting density in- creasing, while fresh root yield per hectare increased with planting density increas- ing. Numbers of storage roots in different sizes of the 6 sweetpotato cultivars all exhibited an order of number of large-sized storage roots〈number of medium-sized storage roots〈small-sized storage root; and there were very significant differences in ratio of large-sized storage roots between different genotypes. The number of large- sized storage roots, ratio of large-sized storage roots and number of commercial storage roots deceased with planting density increasing, while there were no signifi- cant differences in number of medium-sized storage roots, number of small-sized storage roots, ratio of medium-sized storage roots and ratio of small-sized storage roots between different densities. Correlation analysis showed that there was signifi- cant positive correlation between number of basal branches and fresh root yield per plant; dry matter content in storage roots was in significant positive correlation with stem diameter, and in significant negative correlation with length of the longest vine; fresh root yield per hectare was in significant positive correlation with fresh root yield per plant, and in very significant negative correlation with dry matter content; and ratio of large-sized storage roots was in very significant positive correlation with number of large-sized storage root and fresh root yield per plant, and in very sig- nificant negative correlation with ratio of medium-sized storage roots and ratio of small-sized storage roots. This experiment showed that under the planting density of 7.5×104 plants/hm2, the 6 sweetpotato cultivars all reached the highest numbers of commercial storage roots and fresh root yields per hectare.

Photolithography Process Simulation for Integrated Circuits and Microelectromechanical System Fabrication

Simulations of photoresist etching,aerial image,exposure,and post-bake processes are integrated to obtain a photolithography process simulation for microelectromechanical system（MEMS） and integrated circuit（IC） fabrication based on three-dimensional （3D） cellular automata（CA）. The simulation results agree well with available experimental results. This indicates that the 3D dynamic CA model for the photoresist etching simulation and the 3D CA model for the post-bake simulation could be useful for the monolithic simulation of various lithography processes. This is determined to be useful for the device-sized fabrication process simulation of IC and MEMS.

Graphical Simulator for Chinese Ink-Wash Drawing

Simulating the traditional painting art by computer graphics is a challenging and attractive subject. Basing on the experience in the ink wash drawing, in this paper, we expound the artistic characters of ink wash painting and particularly analyze the characteristics of the materials used in the ink wash drawing and the relationships between them. A simulation model is presented and some typical visual effects of the ink wash painting are realized.

Effects of Gel-based Controlled Release Fertilizers on Agronomic Characteristics and Physiological Indices of Corn

[Objective] This study aimed to investigate the effects of gel-based controlled release fertilizers （CRFs） on agronomic characteristics and physiological indices of corn. [Method] Pot experiment was carried out to investigate the agronomic characteristics and physiological indices of corn fertilized with controlled release fertilizers compared with conventional fertilizer （CF）. [Result] Plant height, stem girth, leaf area and root volume of corn were significantly increased under the CRF treatments; photosynthetic rate and soluble protein content were also improved. Dry matter accumulations under the two CRF treatments were increased by 21.3% and 17.0% compared with CF application at one time （CF1）, and 19.6% and 15.4% with CF application at two times （CF2）, respectively. Accumulation amounts of N, P and K in whole plant under the two CRF treatments were increased by 44.0% -24.7% , 40.0%-25.9% and 20.1% -13.9% ; and the nutrient use efficiencies of N, P and K were improved by 22.9% -13.4% , 11.2% -9.6% and 17.5% -12.1% , respectively. [Conclusion] The results implied that the CRFs could significantly improve nutrient use efficiency and plant yield.

Effects of process parameters on microstructure and wear resistance of TiN coatings deposited on TC11 titanium alloy by electrospark deposition

In the present study,the effects of process parameters(output voltage x,nitrogen flux l and specific strengthening time s)on the microstructure and wear resistance properties of TiN coatings prepared by electrospark deposition(ESD)were investigatedsystematically.The microstructure of the coatings was characterized for thickness(TOC),content of TiN(CON)and porosity(POC).A statistical model was developed to identify the significant factors affecting the microstructure and wear resistance of the coatings.The results show that the output voltage x and nitrogen flux l present significant effects on majority of the evaluation indexes such asTOC,friction coefficient(COF)and wear mass loss(Id),while the specific strengthening time s has a significant effect on POC and asmall effect on the other indexes.The optimal process parameters were obtained as follows:output voltage(x,60V),nitrogen flux(l,15L/min)and specific strengthening time(s,3min/cm2).The variation of wear mass loss(Id)by the variation of the outputvoltage(x)and nitrogen flux(l)is attributed to the change of wear mechanisms of TiN coatings.The main wear mechanism of TiNcoating prepared under optimal process parameters is micro-cutting wear accompanied by micro-fracture wear.

Numerical simulation method for weld line development in micro injection molding process

In order to reduce the "trial-mold" risk and cost,numerical simulation method was applied to micro injection molding weld line development investigation. The micro tensile specimen which has the size of 0.1 mm(depth) ×0.4 mm(width) ×12 mm(length) in test area was selected as the objective part,and polypropylene(PP) as the experimental material. Respectively with specific commercial software(Mold Flow) and general computational fluid dynamic(CFD) software(Comsol Multiphysics) ,the simulation experiments for development of weld line in micro injection molding process were executed and the real comparison experiments were also carried out. The results show that during micro injection molding process,the specific commercial software for normal injection molding process is not valid to describe the micro flow process,the shape of flow front in micro cavity flowing which is important in weld line developing study and the contact angle due to surface tension are not able to be simulated. In order to improve the simulation results for micro weld line development,the general CFD software,which is more flexible in user defining function,is applied. The results show better effects in describing micro fluid flow behavior. As a conclusion,as for weld line forming process,the numerical simulation method can give a characteristic analysis results for processing parameters optimizing in micro injection molding process;but for both kinds of softwares quantitative analysis cannot be obtained unless the boundary condition and micro fluid mathematic model are improved in the future.

Simulation of Non-isothermal Injection Molding for a Non-Newtonian Fluid by Level Set Method

A non-isothermal injection molding process for a non-Newtonian viscous pseudoplastic fluid is simulated.A conservative interface capturing technique and the flow field solving method are coupled to perform a dynamic simulation.The validity of the numerical method is verified by a benchmark problem.The melt interface evolution versus time is captured and the physical quantities such as temperature,velocity and pressure at each time step are obtained with corresponding analysis.A"frozen skin"layer with the thickness increasing versus time during the injection process is found.The fact that the"frozen skin"layer can be reduced by increasing the injection velocity is numerically verified.The fountain flow phenomenon near the melt interface is also captured.Moreover,comparisons with the non-isothermal Newtonian case show that the curvatures of the interface arcs and the pressure contours near the horizontal mid-line of the cavity for the non-Newtonian pseudoplastic case is larger than that for the Newtonian case.The velocity profiles are different at different positions for the non-Newtonian pseudoplastic case,while in the case of Newtonian flow the velocity profiles are parabolic and almost the same at different positions.

Phase Transition Analysis Based Quality Prediction for Multi-phase Batch Processes

Batch processes are usually involved with multiple phases in the time domain and many researches on process monitoring as well as quality prediction have been done using phase information. However, few of them consider phase transitions, though they exit widely in batch processes and have non-ignorable impacts on product qualities. In the present work, a phase-based partial least squares (PLS) method utilizing transition information is proposed to give both online and offline quality predictions. First, batch processes are divided into several phases using regression parameters other than prior process knowledge. Then both steady phases and transitions which have great influences on qualities are identified as critical-to-quality phases using statistical methods. Finally, based on the analysis of different characteristics of transitions and steady phases, an integrated algorithm is developed for quality prediction. The application to an injection molding process shows the effectiveness of the proposed algorithm in comparison with the traditional MPLS method and the phase-based PLS method.

Constitutive model and numerical simulation for injection molding of MgTiO_(3) ceramic parts

In order to predict the powder flow law of the injection molding process of MgTiO3 ceramic parts with complex structures,a constitutive model and numerical simulation method for MgTiO3 ceramic injection molding were established based on the Hunt method.The material parameters of MgTiO3 such as elastic modulus,Poisson ratio,glass transition temperature,thermal conductivity and specific heat capacity were measured.Based on the fitting curve and the material parameters measured,the cross-WLF viscosity model and P-V-T model required for MgTiO3 ceramic injection molding were optimized.Furthermore,the influence of process parameters on mold filling flow and distribution of parts defects was researched.It was found that the gate position,injection speed and melt temperature have greater influence on mold filling flow and the packing process has an obvious effect on parts’defects.On this basis,the MgTiO3 ceramic parts injection molding experiment verification was carried out.By comparing the experimental results with the simulated results,it is found that the deformation error is within 1.5%and the density error is within 1%.Therefore,this research provided theoretical guidance for the engineering application of MgTiO3 ceramic parts fabricated by injection molding.

Optimization on springback reduction in cold stretch forming of titanium-alloy aircraft skin

An optimization method was presented for cold stretch forming of titanium-alloy aircraft skin to determine process parameters and to reduce springback.In the optimization model,a mathematical formulation of stress difference was developed as an indicator of the degree of springback instead of implicit springback analysis.Explicit finite element method(FEM)was used to analyze the forming process and to provide the stress distribution for calculating the amount of the stress indicator.In addition,multi-island genetic algorithm(MGA)was employed to seek the optimal loading condition.A case study was performed to demonstrate the potential of the suggested method.The results show that the optimization design of process parameters effectively reduces the amount of springback and improves the part shape accuracy.It provides a guideline for controlling springback in stretch forming of aircraft skin.