A carbon solid acid catalyst was prepared by the sulfonation of partially carbonized peanut shell with concentrated H2SO4. The structure and acidity of the catalyst were characterized by Fourier transform infrared spe...A carbon solid acid catalyst was prepared by the sulfonation of partially carbonized peanut shell with concentrated H2SO4. The structure and acidity of the catalyst were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, thermogravimetric analysis, X‐ray photoelectron spectroscopy, and elemental analysis, which showed that it was an amorphous carbon material composed of aromatic carbon sheets in random orientations. Sulfonic acid groups were present on the surface at a density of 0.81 mmol/g. The carbon solid acid catalyst showed better performance than HZSM‐5 for the esterification of cyclohexene with formic acid. At a3：1 molar ratio of formic acid to cyclohexene, catalyst loading of 0.07 g/mL of cyclohexene, and reaction time of 1 h at 413 K, the cyclohexene conversion was 88.4% with 97.3% selectivity to cyclohexyl formate. The carbon solid acid catalyst showed better reusability than HZSM‐5 because its large pores were minimally affected by the accumulation of oligomerized cyclohexene, which deactivated HZSM‐5. The activity of the carbon solid acid catalyst decreased somewhat in the first two recycles due to the leaching of polycyclic aromatic hydrocarbon containing –SO3H groups and then it remained constant in the following reuse.展开更多
A dynamic measuring apparatus was developed to investigate the infiltration process of liquid metal into the fibrous preform. 10% （volume fraction） chopped carbon fiber preforms were infiltrated with magnesium alloy...A dynamic measuring apparatus was developed to investigate the infiltration process of liquid metal into the fibrous preform. 10% （volume fraction） chopped carbon fiber preforms were infiltrated with magnesium alloy under different infiltration pressures. The threshold pressure and flow behavior of liquid metal infiltrating into the preforms were calculated and measured. The microstructure of obtained Ct4Mg composites was observed. The results indicate that the measured threshold pressure for infiltration was 0.048 MPa, which was larger than the calculated value. The infiltration rate increased with the increase of infiltration pressure, but the increase amplitude decreased gradually. The tiny pores in the composites could be eliminated by increasing the infiltration pressure. When the infiltration pressure rose to 0.6 MPa, high quality C1/Mg composite was obtained.展开更多
文摘在碳纤维/石墨基体上通过毛细化学沉积法制备出具有高离子交换容量与高稳定性的铁氰化镍(nickel hexacyanoferrate,NiHCF)薄膜电极。采用循环伏安法考察了在石墨颗粒粒径100μm、PTFE含量0.05g/g石墨、乙醇量4ml/g石墨、制膜液浓度0.1mol/L(含1.07mol/L乙醇)条件下得到碳纤维/石墨基膜电极的离子交换容量、循环寿命与再生能力;并通过SEM、XPS分析了膜电极表面形貌、组成。研究结果表明,此多孔石墨基体电极比表面积大,沉积得到的NiHCF膜具有较大的离子分离能力、良好的循环稳定性与再生能力,可用于电化学控制离子分离(electro-chemically controlled ion separation,ECIS)过程。
基金supported by the National Natural Science Foundation of China(2123600121176056)+1 种基金the Programme for 100 Excellent Talents in Universities of Hebei Province(II)(BR2-208)the Natural Science Foundation of Hebei Province(B2015202228)~~
文摘A carbon solid acid catalyst was prepared by the sulfonation of partially carbonized peanut shell with concentrated H2SO4. The structure and acidity of the catalyst were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, thermogravimetric analysis, X‐ray photoelectron spectroscopy, and elemental analysis, which showed that it was an amorphous carbon material composed of aromatic carbon sheets in random orientations. Sulfonic acid groups were present on the surface at a density of 0.81 mmol/g. The carbon solid acid catalyst showed better performance than HZSM‐5 for the esterification of cyclohexene with formic acid. At a3：1 molar ratio of formic acid to cyclohexene, catalyst loading of 0.07 g/mL of cyclohexene, and reaction time of 1 h at 413 K, the cyclohexene conversion was 88.4% with 97.3% selectivity to cyclohexyl formate. The carbon solid acid catalyst showed better reusability than HZSM‐5 because its large pores were minimally affected by the accumulation of oligomerized cyclohexene, which deactivated HZSM‐5. The activity of the carbon solid acid catalyst decreased somewhat in the first two recycles due to the leaching of polycyclic aromatic hydrocarbon containing –SO3H groups and then it remained constant in the following reuse.
基金Projects(51221001,51275417)supported by the National Natural Science Foundation of ChinaProject(2013AA8011004B)supported by National High Technology Research and Development Program of ChinaProject(CX201011)supported by the Doctorate Foundation of Northwestern Polytechnical University,China
文摘A dynamic measuring apparatus was developed to investigate the infiltration process of liquid metal into the fibrous preform. 10% （volume fraction） chopped carbon fiber preforms were infiltrated with magnesium alloy under different infiltration pressures. The threshold pressure and flow behavior of liquid metal infiltrating into the preforms were calculated and measured. The microstructure of obtained Ct4Mg composites was observed. The results indicate that the measured threshold pressure for infiltration was 0.048 MPa, which was larger than the calculated value. The infiltration rate increased with the increase of infiltration pressure, but the increase amplitude decreased gradually. The tiny pores in the composites could be eliminated by increasing the infiltration pressure. When the infiltration pressure rose to 0.6 MPa, high quality C1/Mg composite was obtained.
