设计1种可实现自给基准参考电压的前置稳压器.提出1种新的电路结构,该电路结构由前置稳压电路和基准参考电压产生电路组成.前置稳压电路输出稳定电压为芯片其他模块提供稳定电压,基准参考电压产生电路输出与电源无关的基准参考电压,作...设计1种可实现自给基准参考电压的前置稳压器.提出1种新的电路结构,该电路结构由前置稳压电路和基准参考电压产生电路组成.前置稳压电路输出稳定电压为芯片其他模块提供稳定电压,基准参考电压产生电路输出与电源无关的基准参考电压,作为前置稳压电路的参考电压,通过反馈机制,实现稳定输出,从而为芯片在供电电压波动较大的情况下,提供稳定电压.采用BCD工艺模型对电路进行仿真,仿真结果证明此种稳压器的线性调整率为0.008%,负载电流由0上升至100 m A时,负载调整率是1.18%,当频率为10 k Hz时,电源纹波抑制比为-58 d B,频率为40 k Hz时,抑制比为-29.7 d B.展开更多
This paper proposes a resistorless CMOS bandgap reference (BGR) circuit capable of generating a voltage less than 1V and presents a high performance start up circuit that can make the BGR circuit achieve the correct ...This paper proposes a resistorless CMOS bandgap reference (BGR) circuit capable of generating a voltage less than 1V and presents a high performance start up circuit that can make the BGR circuit achieve the correct operation point at power on. The simulation with Hspice was carried out using a 0 25 μm CMOS process. The results indicate that the proposed BGR circuit can operate on a 2 2 to 3 3 V power supply and its output voltage has a variation of 11 mV at -10 to 80 ℃.展开更多
文摘设计1种可实现自给基准参考电压的前置稳压器.提出1种新的电路结构,该电路结构由前置稳压电路和基准参考电压产生电路组成.前置稳压电路输出稳定电压为芯片其他模块提供稳定电压,基准参考电压产生电路输出与电源无关的基准参考电压,作为前置稳压电路的参考电压,通过反馈机制,实现稳定输出,从而为芯片在供电电压波动较大的情况下,提供稳定电压.采用BCD工艺模型对电路进行仿真,仿真结果证明此种稳压器的线性调整率为0.008%,负载电流由0上升至100 m A时,负载调整率是1.18%,当频率为10 k Hz时,电源纹波抑制比为-58 d B,频率为40 k Hz时,抑制比为-29.7 d B.
文摘This paper proposes a resistorless CMOS bandgap reference (BGR) circuit capable of generating a voltage less than 1V and presents a high performance start up circuit that can make the BGR circuit achieve the correct operation point at power on. The simulation with Hspice was carried out using a 0 25 μm CMOS process. The results indicate that the proposed BGR circuit can operate on a 2 2 to 3 3 V power supply and its output voltage has a variation of 11 mV at -10 to 80 ℃.
