期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
用多纵模半导体激光器测量单模光纤的基带频率响应
1
作者 陈李生 《光通信技术》 CSCD 北大核心 1997年第2期127-129,共3页
介绍了单模光纤基带频率响应的两种测量方法:一种是由光纤的色散和光源的光谱分布来确定基带频率响应;另一种是直接在频域测量得到基带频率响应。并对这两种方法的测量结果进行了比较。光源限于目前被广泛使用的多级模半导体激光器。
关键词 单模光纤 带宽 基带频率响应 半导体激光器
下载PDF
光纤参数、测试及设备
2
《中国光学》 EI CAS 1998年第4期54-54,共1页
TN25 98042481偏振保持光纤拍长的磁光调制法测量=Magnetoop-tic modulation measurement of polarizationmaintaining optical fiber beat length[刊,中]/宁鼎(电子部第46研究所.天津(300220))∥光通信技术.—1997,21(1).—42—45叙述... TN25 98042481偏振保持光纤拍长的磁光调制法测量=Magnetoop-tic modulation measurement of polarizationmaintaining optical fiber beat length[刊,中]/宁鼎(电子部第46研究所.天津(300220))∥光通信技术.—1997,21(1).—42—45叙述了利用磁光调制法测量偏振保持光纤拍长的基本原理,介绍了建立的测试系统和方法。 展开更多
关键词 偏振保持光纤 磁光调制 微孔光纤 单模光纤 光通信技术 测试系统 半导体激光器 基带频率响应 测量方法 拍长
下载PDF
频域带宽测试仪
3
作者 林扶 《电信科学》 1986年第11期61-,共1页
光纤频域带宽测试仪系用短波长频域法测量光纤传输特性的设备。邮电部北京仪表研究所研制的频域带宽测试仪达到国际上八十年代同类仪器的水平。该测试仪的动态范围广,接收灵敏度高,光开关盒设有可调衰减器。其主要技术指标:1.测试基带... 光纤频域带宽测试仪系用短波长频域法测量光纤传输特性的设备。邮电部北京仪表研究所研制的频域带宽测试仪达到国际上八十年代同类仪器的水平。该测试仪的动态范围广,接收灵敏度高,光开关盒设有可调衰减器。其主要技术指标:1.测试基带频率范围为5~500MHz;2.工作波长约0.85μm;3.光发送机输出功率≥-10 dBm;4. 展开更多
关键词 频域法 光发送机 光纤传输特性 工作波长 接收机灵敏度 可调衰减器 基带频率 输出功率 动态范围 光开关
下载PDF
Design of a fast-transient and high-stabilized GPS low dropout regulator
4
作者 胡正飞 Xue Shaojia 《High Technology Letters》 EI CAS 2014年第2期208-212,共5页
A high stabilized low dropout(LDO) voltage regulator fabricated for GPS radio frequency(RF) chip in SMIC 0.18μm CMOS technology is presented.The LDO mainly consists of bandgap reference,error amplifier,resistive feed... A high stabilized low dropout(LDO) voltage regulator fabricated for GPS radio frequency(RF) chip in SMIC 0.18μm CMOS technology is presented.The LDO mainly consists of bandgap reference,error amplifier,resistive feedback network and AC current path.A fast current path is added to improve the performance of LDO's transient response.Equivalent series resistance(ESR)compensation and internal Miller compensation are used to constitute the frequency compensation.The measurement results of the transient response of the output voltage show that it can recover within 2μs with less than 120 mV ripple when the load current is changed from 0 to 100 mA.The total quiescent current of LDO and bandgap reference(without load) is 260 μA. 展开更多
关键词 low dropout (LDO) bandgap reference error amplifier AC current path equivalent series resistance (ESR)
下载PDF
Giant magnetoimpedance effect in stress-joule-heated Co-based amorphous ribbons 被引量:3
5
作者 CHEN ShuangQin MAN QiKui +1 位作者 DUN ChaoChao SHEN BaoLong 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS 2012年第12期2372-2377,共6页
Co-based Co63Fe4B22.4Si5.6Nb5 amorphous ribbons with a width of 150 μm and a thickness of 50 μm were prepared by single-roller melt-spinning process.The giant magneto-impedance(GMI) effect of the stress-joule-heated... Co-based Co63Fe4B22.4Si5.6Nb5 amorphous ribbons with a width of 150 μm and a thickness of 50 μm were prepared by single-roller melt-spinning process.The giant magneto-impedance(GMI) effect of the stress-joule-heated ribbons under applied tensile stress ranging from 37 to 148 MPa was investigated.Experimental results show that the spectra of GMI ratio vs.external direct current(dc) field(Hex) of the samples changes dramatically with annealing tension() and driving frequency.The single-peak(SP) GMI curve with maximum GMI ratio of 260% and magnetic field sensitivity of 52%/Oe was obtained in the sample applied tensile stress of 74 MPa at frequency of 3.6 MHz.A three-peak behaviour appeared in the samples under σ of 111 and 148 MPa.The uncommon three-peak behaviour was attributed to several factors,which effectively originated from the balance between domain-wall movement and magnetization rotation. 展开更多
关键词 giant magnetoimpedance effect stress-joule-heated ribbon three-peak behaviour
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部