期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
基液氨浓度对卡琳娜循环不同目标参数的影响 被引量:4
1
作者 李惟毅 梁娜 +2 位作者 孟金英 贾向东 李志会 《化工进展》 EI CAS CSCD 北大核心 2015年第4期957-964,共8页
为了探究基液氨浓度a对卡琳娜循环综合性能的影响,提出了分别以系统热效率ef、换热器经济参数AP、汽轮机尺寸参数TP、系统经济性能参数ECO和系统综合性能参数Obj作为目标函数时,基液氨浓度对其的影响。在分析经济性能和综合性能的变化... 为了探究基液氨浓度a对卡琳娜循环综合性能的影响,提出了分别以系统热效率ef、换热器经济参数AP、汽轮机尺寸参数TP、系统经济性能参数ECO和系统综合性能参数Obj作为目标函数时,基液氨浓度对其的影响。在分析经济性能和综合性能的变化情况时,采用了最优化理论中的线性加权和法对其进行了讨论。结果表明:浓度变化对不同性能参数的影响不同,随着浓度的增大,热效率ef先增大后减小,汽轮机参数TP越来越大,而参数AP、ECO、Obj却随浓度的增大先降后升,存在最佳浓度使得各性能达到最优。同时通过对比得出不同目标函数下所对应的最佳浓度不同。汽轮机入口压力P1一定时,各目标函数所对应的最佳浓度之间的关系为aTP<aECO<aObj<aef<aAP,且压力越大,最佳浓度越大。当P1为1.5MPa、2MPa、2.5MPa时,系统综合性能最优,所对应的基液氨浓度分别为0.44、0.52、0.62。 展开更多
关键词 卡琳娜循环 浓度 热效率 经济性能 综合性能
下载PDF
压裂用纤维携砂性能影响因素分析 被引量:3
2
作者 盖玉叶 张贵玲 +3 位作者 宋时权 邵红云 牟英华 赵俊桥 《石油工业技术监督》 2021年第3期7-8,13,共3页
压裂用纤维是目前纤维压裂技术中所使用的主要材料,针对该材料携砂性能评价方法不完善,不能真实反映其携砂效果问题,开展了纤维加量、压裂液基液的浓度、陶粒的砂比、陶粒的密度等因素对携砂性能影响的实验研究。结果表明:当纤维加量在... 压裂用纤维是目前纤维压裂技术中所使用的主要材料,针对该材料携砂性能评价方法不完善,不能真实反映其携砂效果问题,开展了纤维加量、压裂液基液的浓度、陶粒的砂比、陶粒的密度等因素对携砂性能影响的实验研究。结果表明:当纤维加量在一定浓度范围内,随着纤维加量的增加,陶粒的沉降时间及沉降体积也在增加;当压裂液基液在一定的浓度范围内,随着浓度的增加,纤维的携砂能力增强;但随着陶粒砂比及密度的增大,降低了纤维的携砂能力。 展开更多
关键词 压裂用纤维 携砂性能 基液浓度 陶粒
下载PDF
Effect of Different Calcium Levels on Growth,Yield and Fruit Quality of Tomatoes in Substrate Culture 被引量:6
3
作者 Jing FENG Ruiping LIU Hongyi LUO 《Agricultural Science & Technology》 CAS 2015年第8期1704-1708,共5页
Tomato seedlings were grown in substrate culture with pots. The formulation of Holland Greenhouse Horticulture Research Institute was used(as CK) and the effects of different Ca concentrations(LCa, CK and HCa)on growt... Tomato seedlings were grown in substrate culture with pots. The formulation of Holland Greenhouse Horticulture Research Institute was used(as CK) and the effects of different Ca concentrations(LCa, CK and HCa)on growth, yield, and fruit quality(protein, Vitamin C, nitrates, organic acid and soluble sugar) of tomato were studied keeping concentrations of other nutrients unchanged in the nutrient solution. The results showed that parameters related to the growth of tomato(plant height and Stem diameter), changes of tomato yield per plant and quality of tomato fruits were the highest when the plants were grown at 20% Ca treatments. In the second study, increased EC concentrations of nutrient solution resulted in stronger plants with improved yields and quality. Four different concentration gradients of nutrient solution treatment were designed based on the results of the first research stage(EC=1.5, 2.5, 3.5, 4.5 m S/cm, respectively). The single tomato plant had the highest production which is 2 268.994 g/plant, when the nutrient solution strength was at EC=1.5 m S cm, whereas they have the best fruit quality when the solution strength at EC 4.5 m S/cm. This suggests the need for wide popularization of the nutrient solution formula in large areas to improve the tomato production. 展开更多
关键词 CALCIUM Substrate culture Nutrient solution TOMATO
下载PDF
Dynamics of liquid-phase catalytic oxidation of hydrogen sulfide removal in rural biogas
4
作者 贾丽娟 宁平 +2 位作者 王向宇 瞿广飞 熊向锋 《Journal of Central South University》 SCIE EI CAS 2014年第7期2843-2847,共5页
Hydrogen sulfide in rural biogas was removed with liquid-phase catalytic oxidation.By using rare earth as catalyst,and sulfosalicylic acid as stabilizer,H2S purification efficiency could increase as high as 96%,and su... Hydrogen sulfide in rural biogas was removed with liquid-phase catalytic oxidation.By using rare earth as catalyst,and sulfosalicylic acid as stabilizer,H2S purification efficiency could increase as high as 96%,and sulfur capacity of the composite solution was about 3 g/L.The results show that purification efficiency was affected by catalyst addition,pH,experimental temperature,and sulfur capacity.The parameters effects on catalytic oxidation were studied,and the optimized conditions were that Fe3+ concentration 0.08 mg/L,reaction temperature 70°C,pH 9.0,with a absorption solution volume of 50 mL,a gas flow rate 200 mL/min,and H2S mass concentration of 1.58-2.02 mg/m3. 展开更多
关键词 liquid phase catalytic oxidation hydrogen sulfide rural biogas purification efficiency RARE-EARTH
下载PDF
Ferronickel preparation using Ni-Fe co-deposition process
5
作者 王飞 李磊 +1 位作者 邱士伟 王华 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第12期3072-3078,共7页
Nucleation mechanism and technological process for Ni-Fe co-deposition with a relatively high Fe^(2+)concentration surrounded were described,and the effects of Fe^(2+) concentration,solution pH,temperature,and sodium ... Nucleation mechanism and technological process for Ni-Fe co-deposition with a relatively high Fe^(2+)concentration surrounded were described,and the effects of Fe^(2+) concentration,solution pH,temperature,and sodium dodecyl sulfonate concentration were investigated.Electrochemical experiments demonstrate that iron's electrodeposition plays a leading role in the Ni-Fe co-deposition process,and the co-deposition nucleation mechanism accords with a progressive nucleation.Temperature increase does favor in increasing nickel content in the ferronickel(Ni-Fe co-deposition products),while Fe^(2+) concentration increase does not.When solution pH is higher than 3.5,nickel content in the ferronickel decreases with pH because of the hydrolysis of Fe^(2+).With the current density of 180 A/m^2,Na_2SO_4 concentration of 100 g/L and Ni^(2+) concentration of 60 g/L,a smooth ferronickel deposit containing 96.21% Ni can be obtained under the conditions of temperature of 60 °C,Fe^(2+) concentration of 0.3 g/L,solution pH of 3 and sodium dodecyl sulfonate concentration of 40 mg/L. 展开更多
关键词 Fe concentration surrounded waste regenerationNi-Fe co-deposition nucleation mechanism high 2+
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部