期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
TEM测定α-Al_2O_3载体的二次粒子堆积孔大小及分布 被引量:2
1
作者 郭义 李毅 《石化技术与应用》 CAS 2003年第1期55-57,共3页
在两种近似情况下 ,建立了α-Al2 O3载体的二次粒子堆积孔模型 ;用TEM测定α -Al2 O3载体的二次粒子大小及分布 。
关键词 大小 分布 TEM 测定 堆积孔 二次粒子 载体 催化剂 Α-AL2O3
下载PDF
多孔陶瓷制备技术及其进展 被引量:28
2
作者 杨刚宾 蔡序珩 +1 位作者 乔冠军 金志浩 《河南科技大学学报(自然科学版)》 CAS 2004年第2期99-103,共5页
介绍了多孔陶瓷材料的基本特征、类型、应用前景及特性表征 ;阐述了当前多孔陶瓷的几种主要制备方法 ,并对相关制备工艺的特点进行了分析 ;讨论了多孔陶瓷目前存在的主要问题并指出了多孔陶瓷的主要发展趋势。
关键词 陶瓷 制备技术 工艺设计 渗透能力 挤出成型工艺 颗粒堆积工艺
下载PDF
多孔陶瓷的制备及应用 被引量:7
3
作者 蒲锡鹏 邱发贵 +1 位作者 刘学建 黄莉萍 《陶瓷科学与艺术》 CAS 2004年第1期37-42,共6页
根据成孔原理,多孔陶瓷成型工艺可分为七大类,对各种工艺进行了简要论述结合作者的工作对有机泡沫体浸渍工艺中的关键技术进行了较详细的探讨,并简要描述了两次离心挂浆工艺的过程及实验结果。最后,展望了多孔陶瓷的应用前景及尚待解决... 根据成孔原理,多孔陶瓷成型工艺可分为七大类,对各种工艺进行了简要论述结合作者的工作对有机泡沫体浸渍工艺中的关键技术进行了较详细的探讨,并简要描述了两次离心挂浆工艺的过程及实验结果。最后,展望了多孔陶瓷的应用前景及尚待解决的问题。 展开更多
关键词 陶瓷 制备 机械成 颗粒堆积 陶瓷发泡 模板法
下载PDF
3D characterization and analysis of pore structure of packed ore particle beds based on computed tomography images 被引量:12
4
作者 杨保华 吴爱祥 +1 位作者 缪秀秀 刘金枝 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2014年第3期833-838,共6页
Methods and procedures of three-dimensional (3D) characterization of the pore structure features in the packed ore particle bed are focused. X-ray computed tomography was applied to deriving the cross-sectional imag... Methods and procedures of three-dimensional (3D) characterization of the pore structure features in the packed ore particle bed are focused. X-ray computed tomography was applied to deriving the cross-sectional images of specimens with single particle size of 1-2, 2-3, 3-4, 4-5, 5-6, 6-7, 7-8, 8-9, 9-10 ram. Based on the in-house developed 3D image analysis programs using Matlab, the volume porosity, pore size distribution and degree of connectivity were calculated and analyzed in detail. The results indicate that the volume porosity, the mean diameter of pores and the effective pore size (d50) increase with the increasing of particle size. Lognormal distribution or Gauss distribution is mostly suitable to model the pore size distribution. The degree of connectivity investigated on the basis of cluster-labeling algorithm also increases with increasing the particle size approximately. 展开更多
关键词 packed ore particle bed 3D pore structure X-ray computed tomography image analysis
下载PDF
Influences of rainfall infiltration on stability of accumulation slope by in-situ monitoring test 被引量:9
5
作者 周中 王宏贵 +1 位作者 傅鹤林 刘宝琛 《Journal of Central South University》 SCIE EI CAS 2009年第2期297-302,共6页
In order to improve the understanding of the fundamental mechanism of rainfall infiltration induced landslides in accumulation slope and to clarify some important characteristics of slope performance,artificial rainfa... In order to improve the understanding of the fundamental mechanism of rainfall infiltration induced landslides in accumulation slope and to clarify some important characteristics of slope performance,artificial rainfall simulation tests and field synthetic monitoring were carried out on a typical accumulation slope of Shangrui Freeway in Guizhou Province,China.The monitoring results show that the most accumulation landslides caused by rainfall infiltration are shallow relaxation failure,whose deformation zone lies within the top 0-4 m soil layer.The deformation of slope gradually reduces from the surface,where the greatest deformation lies in,to the deep part of slope.The average percentage of infiltration during the first 2 h is 86%,and then it reduces gradually with time because of the increase of the surface runoff.The average percentage of infiltration drop to a relatively stable value(50%)after 6 h.Rainfall infiltration causes obvious increase of pore-water pressure,which may result in a reduction of shear strength due to a decrease in effective stress and wetting-induced softening.The double-effect of rainfall infiltration is the main reason of rainfall infiltration induced landslides in accumulation slope. 展开更多
关键词 accumulation slope STABILITY rainfall infiltration in-situ monitoring
下载PDF
Three-dimensional modeling and porosity calculation of coal rock pore structure
6
作者 Li-Qiong Chen-Zheng +3 位作者 Yue-Lin Zhang-Yu He Jian-Jun Li-Yong 《Applied Geophysics》 SCIE CSCD 2022年第2期161-172,306,共13页
Coal rock is a type of dual-porosity medium,which is composed of matrix pores and fracture-cutting matrix.They play different roles in the seepage and storage capacity of coal rock.Therefore,constructing the micropore... Coal rock is a type of dual-porosity medium,which is composed of matrix pores and fracture-cutting matrix.They play different roles in the seepage and storage capacity of coal rock.Therefore,constructing the micropore structure of coal rock is very important in the exploration and development of coalbed methane.In this study,we use a coal rock digital core and three-dimensional modeling to study the pore structure of coal rock.First,the micropore structure of coal rock is quantitatively analyzed using a two-dimensional thin-section image,and the quantitative information of the pore and fracture(cleat)structure in the coal rock is extracted.The mean value and standard deviation of the face porosity and pore radius are obtained using statistical analysis.The number of pores is determined using dichotomy and spherical random-packing methods based on compression.By combining with the results of the petrophysical analysis,the single-porosity structure model of the coal rock is obtained using a nonequal-diameter sphere to represent the pores of the coal rock.Then,an ellipsoid with an aspect ratio that is very much lesser than one is used to represent the fracture(cleat)in the coal rock,and a dual-pore structure model of the coal rock is obtained.On this basis,the relationship between the different pore aspect ratios and porosity is explored,and a fitting relationship is obtained.The results show that a nonlinear relationship exists between them.The relationship model can provide a basis for the prediction of coal rock pore structure and the pore structure parameters and provide a reference for understanding the internal structure of coalbed methane reservoirs. 展开更多
关键词 Coal rock 3D model of pore structures random-packing method POROSITY pore aspect ratio nonlinear-fitting relationship
下载PDF
Effect of rainfall on a colluvial landslide in a debris flow valley
7
作者 QIAO Liang MENG Xing-min +4 位作者 CHEN Guan ZHANG Yi GUO Peng ZENG Run-qiang LI Ya-jun 《Journal of Mountain Science》 SCIE CSCD 2017年第6期1113-1123,共11页
A colluvial landslide in a debris flow valley is a typical phenomena and is easily influenced by rainfall. The direct destructiveness of this kind of landslide is small, however, if failure occurs the resulting blocki... A colluvial landslide in a debris flow valley is a typical phenomena and is easily influenced by rainfall. The direct destructiveness of this kind of landslide is small, however, if failure occurs the resulting blocking of the channel may lead to a series of magnified secondary hazards. For this reason it is important to investigate the potential response of this type of landslide to rainfall. In the present paper, the Goulingping landslide, one of the colluvial landslides in the Goulingping valley in the middle of the Bailong River catchment in Gansu Province, China, was chosen for the study. Electrical Resistivity Tomography(ERT), Terrestrial Laser Scanning(TLS), together with traditional monitoring methods, were used to monitor changes in water content and the deformation of the landslide caused by rainfall. ERT was used to detect changes in soil water content induced by rainfall. The most significant findings were as follows:(1) the water content in the centralupper part(0~41 m) of the landslide was greaterthan in the central-front part(41~84 m) and(2) there was a relatively high resistivity zone at depth within the sliding zone. The deformation characteristics at the surface of the landslide were monitored by TLS and the results revealed that rainstorms caused three types of deformation and failure:(1) gully erosion at the slope surface;(2) shallow sliding failure;(3) and slope foot erosion. Subsequent monitoring of continuous changes in pore-water pressure, soil pressure and displacement(using traditional methods) indicated that long duration light rainfall(average 2.22 mm/d) caused the entire landslide to enter a state of creeping deformation at the beginning of the rainy season. Shear-induced dilation occurred for the fast sliding(30.09 mm/d) during the critical failure sub-phase(EF). Pore-water pressure in the sliding zone was affected by rainfall. In addition, the sliding L1 parts of the landslide exerted a discontinuous pressure on the L2 part. Through the monitoring and analysis, we conclude that this kind of landslide may have large deformation at the beginning and the late of the rainy season. 展开更多
关键词 Colluvial landslide Debris flow Rainfall Electrical resistivity tomography Terrestrial laser scanning Electrical resistivity tomography
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部