Flame heat transfer blockage occurs as fuel vapors, soot and products of combustion near a burning fuel surface block much of the heat feedbacks （including external radiative heat flux） to the fuel surface of a burn...Flame heat transfer blockage occurs as fuel vapors, soot and products of combustion near a burning fuel surface block much of the heat feedbacks （including external radiative heat flux） to the fuel surface of a burning object. Blockage clearly affects burning rates and heat release rates of fires. This needs to be included when calculating flame heat transfer in fire growth models. An understanding of bttrning of materials in small scale fires is of broad and vital importance for predicting their burning performance in large scale fires. The blockage phenomenon was clearly observed and quantitatively measured in experiments that took advantage of the unique capability of the Fire Propagation Apparatus （FPA） of being able to vary the ambient oxygen concentrations. An indirect measurement approach was established which provides an experimental understanding of the concept of the blockage. The measurements were further explained by a one-dimensional steady-state model of a diffusion flame, which focuses on the radiant absorption and emission by the gas-soot mixture of flames. The theoretical model provides a greater understanding of the fundamental knowledge of the blockage. The overall heat transfer blockage factor can be up to 0.3 -0.4 for PMMA and POM. The factor and its components are nearly independent of the external radiation, but increase as the ambient oxygen concentration rises. A comparison between experimental data and model prediction shows a good agreement.展开更多
文摘Flame heat transfer blockage occurs as fuel vapors, soot and products of combustion near a burning fuel surface block much of the heat feedbacks （including external radiative heat flux） to the fuel surface of a burning object. Blockage clearly affects burning rates and heat release rates of fires. This needs to be included when calculating flame heat transfer in fire growth models. An understanding of bttrning of materials in small scale fires is of broad and vital importance for predicting their burning performance in large scale fires. The blockage phenomenon was clearly observed and quantitatively measured in experiments that took advantage of the unique capability of the Fire Propagation Apparatus （FPA） of being able to vary the ambient oxygen concentrations. An indirect measurement approach was established which provides an experimental understanding of the concept of the blockage. The measurements were further explained by a one-dimensional steady-state model of a diffusion flame, which focuses on the radiant absorption and emission by the gas-soot mixture of flames. The theoretical model provides a greater understanding of the fundamental knowledge of the blockage. The overall heat transfer blockage factor can be up to 0.3 -0.4 for PMMA and POM. The factor and its components are nearly independent of the external radiation, but increase as the ambient oxygen concentration rises. A comparison between experimental data and model prediction shows a good agreement.
