A thickness strain model of aluminium alloy plate under plastic deformation,based on thin plate assumption was proposed.It is found that when ratio of stress fractions is constant during in-plane loading,ratios of str...A thickness strain model of aluminium alloy plate under plastic deformation,based on thin plate assumption was proposed.It is found that when ratio of stress fractions is constant during in-plane loading,ratios of strain components under various loading conditions are linearly related and these points of ratios form a η-η line.Under these simple loadings,strains in thickness direction can be easily calculated by the η-η line equation without integral and differential work.When the plate is under more complicated loading conditions,the thickness can be computed by the proposed optimization and piecewise calculation model.Validation computations indicate that the relative error of the results of the presented model is less than 0.75% compared with the proven theories and FE simulation.Therefore,the developed model can be applied to engineering calculation,e.g.pre-stretching analysis of aerospace aluminium thick plate,with acceptable accuracy.展开更多
Twenty-one square concrete columns were constructed and tested. The testing results indicate that bonded carbon fiber reinforced plastics(CFRP) sheets can be used to increase the strength and improve the serviceabilit...Twenty-one square concrete columns were constructed and tested. The testing results indicate that bonded carbon fiber reinforced plastics(CFRP) sheets can be used to increase the strength and improve the serviceability of damaged concrete columns at low temperatures. The failure of the specimens,in most cases,takes place within the middle half of the columns. And the failure of strengthened columns is sudden and explosive. The CFRP sheets increase both the axial load capacity and the ultimate concrete compressive strain of the columns. The ultimate loads of strengthened columns at-10,0 and 10 ℃ increase averagely by 9.09%,6.63% and 17.83%,respectively,as compared with those of the control specimens. The axial compressive strength of strengthened columns is related to the curing temperatures. The improvement of axial compressive strength decreases with reducing temperature,and when the temperature drops to a certain value,the improvement increases with falling temperature.展开更多
It has been proposed that the North China Craton(NCC)was thinned up to a thickness of>100 km during the Phanerozoic,and underwent an associated craton destruction.Evidently,it is an important topic worthy of future...It has been proposed that the North China Craton(NCC)was thinned up to a thickness of>100 km during the Phanerozoic,and underwent an associated craton destruction.Evidently,it is an important topic worthy of future study to understanding the mechanism of cratonic destruction and its role played in the continental evolution.After synthesized the global cratons of India,Brazil,South Africa,Siberia,East Europe(Baltic)and North America,we found that lithospheric thinning is common in the cratonic evolution,but it is not always associated with craton destruction.Most cratons was thinned by thermal erosion of mantle plume or mantle upwelling,which,however,may not cause craton destruction.Based on the studies of the North American and North China Cratons,we suggest that oceanic subduction plays an important role in caton destruction.Fluids or melts released by dehydration of the subducted slabs metasomatize the mantle wedge above and trigger extensive partial melting.More importantly,the metasomatized mantle lost its original rigidity and make craton easier to be deformed and then to be destoyed.Therefore,we suggest that the widespread crust-derived granite and large-scale ductile deformation within the continental crust can be regarded as the petrological and structural indicators of craton destruction,respectively.展开更多
基金Project(51475483)supported by the National Natural Science Foundation of ChinaProject(2014FJ3002)supported by Science and Technology Project of Hunan Province,ChinaProject supported by Aid Program for Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province,China
文摘A thickness strain model of aluminium alloy plate under plastic deformation,based on thin plate assumption was proposed.It is found that when ratio of stress fractions is constant during in-plane loading,ratios of strain components under various loading conditions are linearly related and these points of ratios form a η-η line.Under these simple loadings,strains in thickness direction can be easily calculated by the η-η line equation without integral and differential work.When the plate is under more complicated loading conditions,the thickness can be computed by the proposed optimization and piecewise calculation model.Validation computations indicate that the relative error of the results of the presented model is less than 0.75% compared with the proven theories and FE simulation.Therefore,the developed model can be applied to engineering calculation,e.g.pre-stretching analysis of aerospace aluminium thick plate,with acceptable accuracy.
基金Project(04043076) supported by the Outstanding Youth Foundation for Scientific and Technological Research of Anhui Province, ChinaProject(2007jq1035) supported by the Scientific Research Projects for Young College Teachers of Anhui Province, China
文摘Twenty-one square concrete columns were constructed and tested. The testing results indicate that bonded carbon fiber reinforced plastics(CFRP) sheets can be used to increase the strength and improve the serviceability of damaged concrete columns at low temperatures. The failure of the specimens,in most cases,takes place within the middle half of the columns. And the failure of strengthened columns is sudden and explosive. The CFRP sheets increase both the axial load capacity and the ultimate concrete compressive strain of the columns. The ultimate loads of strengthened columns at-10,0 and 10 ℃ increase averagely by 9.09%,6.63% and 17.83%,respectively,as compared with those of the control specimens. The axial compressive strength of strengthened columns is related to the curing temperatures. The improvement of axial compressive strength decreases with reducing temperature,and when the temperature drops to a certain value,the improvement increases with falling temperature.
基金supported by National Natural Science Foundation of China(Grant Nos.41130313 and 91014007)
文摘It has been proposed that the North China Craton(NCC)was thinned up to a thickness of>100 km during the Phanerozoic,and underwent an associated craton destruction.Evidently,it is an important topic worthy of future study to understanding the mechanism of cratonic destruction and its role played in the continental evolution.After synthesized the global cratons of India,Brazil,South Africa,Siberia,East Europe(Baltic)and North America,we found that lithospheric thinning is common in the cratonic evolution,but it is not always associated with craton destruction.Most cratons was thinned by thermal erosion of mantle plume or mantle upwelling,which,however,may not cause craton destruction.Based on the studies of the North American and North China Cratons,we suggest that oceanic subduction plays an important role in caton destruction.Fluids or melts released by dehydration of the subducted slabs metasomatize the mantle wedge above and trigger extensive partial melting.More importantly,the metasomatized mantle lost its original rigidity and make craton easier to be deformed and then to be destoyed.Therefore,we suggest that the widespread crust-derived granite and large-scale ductile deformation within the continental crust can be regarded as the petrological and structural indicators of craton destruction,respectively.
