Feather, as a by-product of the poultry industry, has long been treated as a solid waste, which causes environ- mental and economic problems. In this work, the hydrolyzed feather keratin （HFK） was extracted from the...Feather, as a by-product of the poultry industry, has long been treated as a solid waste, which causes environ- mental and economic problems. In this work, the hydrolyzed feather keratin （HFK） was extracted from the chicken feather using a cost-effective method of alkali-extraction and acid-precipitation by applying urea and sodium sulfide. The aim was development and characterization of the eco-friendly films based on the HFK with variable glycerol contents by a thermoplastic process. The thermal analysis showed that high temperature and high pres- sure improved the compatibility between the glycerol and the HFI（ molecules. Also it was shown that the addi- tion of water is necessary in the hot-pressing process of films, The FT-IR analysis indicated that the formation of the new hydrogen bonds between HFK and glycerol. By increasing the glycerol content, the film tensile strength （orb ） decreases from 10,5 MPa to 5.7 MPa and the solubility increases from 15.3% to 20.9%, while the elongation at break （εb） achieves the maximum value of 63,8% for the film with 35% glycerol. The swelling was just below 16.9% at 25 ℃ for 24 h, suggesting a good stability of the films in water. The water vapor permeability （WVP） varied between 3.02 x 10 ^10g. m 2. s-1 . pa-1 and 4.11 x 10-10g · m-2 · s-1 · Pa-1 for the films with 20%and 40% glycerol, respectively. The HFK film was uniform, translucent and tough, which could be used in packaging and agricultural field.展开更多
Reference materials for quantitative determination of regulated heavy metals, such as Pb and Cd in electronic components, were designed and investigated in terms of stability and homogeneity. Reference materials with ...Reference materials for quantitative determination of regulated heavy metals, such as Pb and Cd in electronic components, were designed and investigated in terms of stability and homogeneity. Reference materials with two concentration levels of heavy metals were prepared by spiking Pb and Cd compounds to epoxy molding compounds made by mixing silica powders and epoxy resin. The concentration changes of the reference materials during stability test for 1 a were not observed. In the homogeneity assessment, the as-prepared reference materials were studied by using three different analytical tools, inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluoroescence spectrometry (XRF) and laser ablation ICP mass. The results show different homogeneities by the characteristics of analytical tools and the materials.展开更多
Most species evolve within fluctuating environments, and have developed adaptations to meet the challenges posed by environmental heterogeneity. One such adaptation is phenotypic plasticity, or the ability of a single...Most species evolve within fluctuating environments, and have developed adaptations to meet the challenges posed by environmental heterogeneity. One such adaptation is phenotypic plasticity, or the ability of a single genotype to produce multiple environmentally-induced phenotypes. Yet, not all plasticity is adaptive. Despite the renewed interest in adaptive phenotypic plas- ticity and its consequences for evolution, much less is known about maladaptive plasticity. However, maladaptive plasticity is likely an important driver of phenotypic similarity among populations living in different environments. This paper traces four strategies for overcoming maladaptive plasticity that result in phenotypic similarity, two of which involve genetic changes （standing genetic variation, genetic compensation） and two of which do not （standing epigenetic variation, plastic compensation）. Plastic compensation is defined as adaptive plasticity overcoming maladaptive plasticity. In particular, plastic compensation may increase the likelihood of genetic compensation by facilitating population persistence. We provide key terms to disentangle these aspects of phenotypic plasticity and introduce examples to reinforce the potential importance of plastic compensation for under- standing evolutionary change展开更多
基金Supported by the National Natural Science Foundation of China(21176269,31371880,31401526)Higher School Science and Technology Innovation Project of Guangdong Province(2013KJCX0102)Science and Technology Plan Project of Guangdong Province(2013B010403029)
文摘Feather, as a by-product of the poultry industry, has long been treated as a solid waste, which causes environ- mental and economic problems. In this work, the hydrolyzed feather keratin （HFK） was extracted from the chicken feather using a cost-effective method of alkali-extraction and acid-precipitation by applying urea and sodium sulfide. The aim was development and characterization of the eco-friendly films based on the HFK with variable glycerol contents by a thermoplastic process. The thermal analysis showed that high temperature and high pres- sure improved the compatibility between the glycerol and the HFI（ molecules. Also it was shown that the addi- tion of water is necessary in the hot-pressing process of films, The FT-IR analysis indicated that the formation of the new hydrogen bonds between HFK and glycerol. By increasing the glycerol content, the film tensile strength （orb ） decreases from 10,5 MPa to 5.7 MPa and the solubility increases from 15.3% to 20.9%, while the elongation at break （εb） achieves the maximum value of 63,8% for the film with 35% glycerol. The swelling was just below 16.9% at 25 ℃ for 24 h, suggesting a good stability of the films in water. The water vapor permeability （WVP） varied between 3.02 x 10 ^10g. m 2. s-1 . pa-1 and 4.11 x 10-10g · m-2 · s-1 · Pa-1 for the films with 20%and 40% glycerol, respectively. The HFK film was uniform, translucent and tough, which could be used in packaging and agricultural field.
基金Project(2010-0008-276) supported by NCRC (National Core Research Center) program through the National Research Foundation of Korea funded by the Ministry of Education, Science and Technology
文摘Reference materials for quantitative determination of regulated heavy metals, such as Pb and Cd in electronic components, were designed and investigated in terms of stability and homogeneity. Reference materials with two concentration levels of heavy metals were prepared by spiking Pb and Cd compounds to epoxy molding compounds made by mixing silica powders and epoxy resin. The concentration changes of the reference materials during stability test for 1 a were not observed. In the homogeneity assessment, the as-prepared reference materials were studied by using three different analytical tools, inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluoroescence spectrometry (XRF) and laser ablation ICP mass. The results show different homogeneities by the characteristics of analytical tools and the materials.
文摘Most species evolve within fluctuating environments, and have developed adaptations to meet the challenges posed by environmental heterogeneity. One such adaptation is phenotypic plasticity, or the ability of a single genotype to produce multiple environmentally-induced phenotypes. Yet, not all plasticity is adaptive. Despite the renewed interest in adaptive phenotypic plas- ticity and its consequences for evolution, much less is known about maladaptive plasticity. However, maladaptive plasticity is likely an important driver of phenotypic similarity among populations living in different environments. This paper traces four strategies for overcoming maladaptive plasticity that result in phenotypic similarity, two of which involve genetic changes （standing genetic variation, genetic compensation） and two of which do not （standing epigenetic variation, plastic compensation）. Plastic compensation is defined as adaptive plasticity overcoming maladaptive plasticity. In particular, plastic compensation may increase the likelihood of genetic compensation by facilitating population persistence. We provide key terms to disentangle these aspects of phenotypic plasticity and introduce examples to reinforce the potential importance of plastic compensation for under- standing evolutionary change
