Chinese bamboo flour was chemically modified by acetylation with acetic anhydride by using trichloroacetic acid as an activation agent and the optimized condition for acetylation of bamboo flour was determined as the ...Chinese bamboo flour was chemically modified by acetylation with acetic anhydride by using trichloroacetic acid as an activation agent and the optimized condition for acetylation of bamboo flour was determined as the trichloroacetic acid amount 6.0 g per 1.5-g bamboo flour, ultrasosonication duration 40 min and the reaction time 1 h at 65℃. The composition, microstructure and thermal behavior of acetylated bamboo flour were preliminarily characterized by FT-IR, DSC and SEM etc. The acetylated bamboo flour can be molded into sheets at 130℃ and 10 MPa, indicating the modified bamboo flour possesses thermalplastic performance.展开更多
Thermoplastic starch is a kind of modified starch produced by mixing starch with additives and processing the mixture in an extruder. The mechanical properties, including tensile strength and elongation at break, biod...Thermoplastic starch is a kind of modified starch produced by mixing starch with additives and processing the mixture in an extruder. The mechanical properties, including tensile strength and elongation at break, biodegradability and rheological properties were studied. Glycerol and urea, to some extent, can both decrease the tensile strength and increase percentage elongation at break, because the former acts as a plasticizer and the latter can break down interactions among starch macromolecules. Thermoplastic starch shows thermoplasticity and its melt behaves as a pseudoplastic liquid at a low shear rate. Its biodegrading extent is slightly higher than that of native starch. The molecular weight of starch displays a decreasing tendency after thermoplastic modification.展开更多
The granular structure, crystal structure and gelatinization temp. of thermoplastic starch were studied with a polarized light microscope and a scanning electron microscope, and the crystallinity and crystalline patte...The granular structure, crystal structure and gelatinization temp. of thermoplastic starch were studied with a polarized light microscope and a scanning electron microscope, and the crystallinity and crystalline patterns were determined through X ray diffraction. The results indicate that the original granular structure and spherical crystalline structure of starch were disrupted by the action of pressure, heat and shear force with the help of additives. The starch can be melted during extrusion, and part of the spheric crystal was destroyed and changed into a continual amorphous with a few crystalline fractions dispersed in it. The configuration of starch molecules changed from double helices to single helix, which indicated the formation of the complex.展开更多
In-situ reactive compatibilization of high-density polyethylene （HDPE）/ground tire rubber （GTR） blends by dicumyl peroxide （DCP） and HY-2045 - a kind of thermoplastic phenolic resin without catalyst was inves...In-situ reactive compatibilization of high-density polyethylene （HDPE）/ground tire rubber （GTR） blends by dicumyl peroxide （DCP） and HY-2045 - a kind of thermoplastic phenolic resin without catalyst was investigated by studying the mor-phology, stress and strain behavior, dynamic mechanical properties and crystallization performance of the blends. Scanning e-lectron microscopy （SEM） results show that there are a lot of fibrous materials distributing in the interface, which connects the dispersed phase with the matrix and obtains better interfacial strength for prominent mechanical properties. The addition of compatibilizers results in the decrease of crystallinity of the blends and the disappearance of an obvious yield phenomenon, which was proved by the differential scanning calorimeter （DSC） test and X-ray diffraction （XRD） characterization Although the crystallinity of the blends decreases,the tensile strength and tensile strain of the blends significantly increases, especially for the HDPE/GTR/DCP/HY-2045 blends, which is possibly attributed to the good compatibility of the blends owing to the in-situ interface crosslinking. In addition, it is found that the compatibilizing HDPE/GTR blends shows a higher tan^ peak temperature and a broaden transition peak for GTR phase.展开更多
100%green carbon foam from the fibrous fruits of Platanus Orientalis-L(Plane)along with the tar oil as binder has been prepared using a powder molding technique.The objective was to develop a porous monolithic carbon ...100%green carbon foam from the fibrous fruits of Platanus Orientalis-L(Plane)along with the tar oil as binder has been prepared using a powder molding technique.The objective was to develop a porous monolithic carbon from biomaterials with a considerable strength necessary for various physical,thermal and electromagnetic shielding applications.Fast carbonization was carried out at1000°C under the cover of Plane tree pyrolyzed seeds without using any external protective gas.For comparative analysis,some samples were mixed with5%(mass fraction)iron chloride during the molding process.Iron chloride being a graphitization catalyst and activating agent helped in increasing the specific surface area from88to294m2/g with a25%decrease in flexural strength.Thermal stability was improved due to the incorporation of more graphitic phases in the sample resulting in a little higher thermal conductivity from0.22to0.67W/(m·K).The catalytic carbon foam exhibited shielding effectiveness of more than20dB over the X-band frequency.Absorption was dominant with only8.26%?10.33%reflectance,indicating an absorption dominant shielding mechanism.The new material is quite suitable for high temperature thermal insulation being lightweight,highly porous with interconnected porous morphology most of which is preserved from the original biomaterial.展开更多
Powder extrusion, which is based on the superplastic behavior of Zn-22%A1 eutectoid alloy, was proposed to reduce the forming load and promises to provide fine microstructures in the manufacture of miniature helical g...Powder extrusion, which is based on the superplastic behavior of Zn-22%A1 eutectoid alloy, was proposed to reduce the forming load and promises to provide fine microstructures in the manufacture of miniature helical gears. The specifications of the helical gears were as follows： module, 0.3; number of teeth, 12; and helix angle, 15°. Compacted powders were consolidated by sintering and solution heat treatment. The consolidated billets consisted of lamellar and fine-grained microstructures. Extrusion experiments were carried out under the following conditions： temperature, 250 ℃; strain rates, 2.36× 10-3 s^-1 and 1.18× 10^-1 s-1. The mechanical properties of the extruded helical gears were investigated by measurement of the Vickers hardness and extrusion load, and by scanning electron microscopy.展开更多
基金Fujian Province science and technology office (2007F5030)(in part) National Natural Scince Foundation of China (grant 50473063)
文摘Chinese bamboo flour was chemically modified by acetylation with acetic anhydride by using trichloroacetic acid as an activation agent and the optimized condition for acetylation of bamboo flour was determined as the trichloroacetic acid amount 6.0 g per 1.5-g bamboo flour, ultrasosonication duration 40 min and the reaction time 1 h at 65℃. The composition, microstructure and thermal behavior of acetylated bamboo flour were preliminarily characterized by FT-IR, DSC and SEM etc. The acetylated bamboo flour can be molded into sheets at 130℃ and 10 MPa, indicating the modified bamboo flour possesses thermalplastic performance.
文摘Thermoplastic starch is a kind of modified starch produced by mixing starch with additives and processing the mixture in an extruder. The mechanical properties, including tensile strength and elongation at break, biodegradability and rheological properties were studied. Glycerol and urea, to some extent, can both decrease the tensile strength and increase percentage elongation at break, because the former acts as a plasticizer and the latter can break down interactions among starch macromolecules. Thermoplastic starch shows thermoplasticity and its melt behaves as a pseudoplastic liquid at a low shear rate. Its biodegrading extent is slightly higher than that of native starch. The molecular weight of starch displays a decreasing tendency after thermoplastic modification.
文摘The granular structure, crystal structure and gelatinization temp. of thermoplastic starch were studied with a polarized light microscope and a scanning electron microscope, and the crystallinity and crystalline patterns were determined through X ray diffraction. The results indicate that the original granular structure and spherical crystalline structure of starch were disrupted by the action of pressure, heat and shear force with the help of additives. The starch can be melted during extrusion, and part of the spheric crystal was destroyed and changed into a continual amorphous with a few crystalline fractions dispersed in it. The configuration of starch molecules changed from double helices to single helix, which indicated the formation of the complex.
文摘In-situ reactive compatibilization of high-density polyethylene （HDPE）/ground tire rubber （GTR） blends by dicumyl peroxide （DCP） and HY-2045 - a kind of thermoplastic phenolic resin without catalyst was investigated by studying the mor-phology, stress and strain behavior, dynamic mechanical properties and crystallization performance of the blends. Scanning e-lectron microscopy （SEM） results show that there are a lot of fibrous materials distributing in the interface, which connects the dispersed phase with the matrix and obtains better interfacial strength for prominent mechanical properties. The addition of compatibilizers results in the decrease of crystallinity of the blends and the disappearance of an obvious yield phenomenon, which was proved by the differential scanning calorimeter （DSC） test and X-ray diffraction （XRD） characterization Although the crystallinity of the blends decreases,the tensile strength and tensile strain of the blends significantly increases, especially for the HDPE/GTR/DCP/HY-2045 blends, which is possibly attributed to the good compatibility of the blends owing to the in-situ interface crosslinking. In addition, it is found that the compatibilizing HDPE/GTR blends shows a higher tan^ peak temperature and a broaden transition peak for GTR phase.
基金Project(CX201627) supported by the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University,China
文摘100%green carbon foam from the fibrous fruits of Platanus Orientalis-L(Plane)along with the tar oil as binder has been prepared using a powder molding technique.The objective was to develop a porous monolithic carbon from biomaterials with a considerable strength necessary for various physical,thermal and electromagnetic shielding applications.Fast carbonization was carried out at1000°C under the cover of Plane tree pyrolyzed seeds without using any external protective gas.For comparative analysis,some samples were mixed with5%(mass fraction)iron chloride during the molding process.Iron chloride being a graphitization catalyst and activating agent helped in increasing the specific surface area from88to294m2/g with a25%decrease in flexural strength.Thermal stability was improved due to the incorporation of more graphitic phases in the sample resulting in a little higher thermal conductivity from0.22to0.67W/(m·K).The catalytic carbon foam exhibited shielding effectiveness of more than20dB over the X-band frequency.Absorption was dominant with only8.26%?10.33%reflectance,indicating an absorption dominant shielding mechanism.The new material is quite suitable for high temperature thermal insulation being lightweight,highly porous with interconnected porous morphology most of which is preserved from the original biomaterial.
基金Project (2010-0008-277) supported by the NCRC (National Core Research Center) Program through the National Research Foundation of Korea,funded by the Ministry of Education,Science,and TechnologyProject (NRF-2009-K20601000004-09E0100-00410) supported by PNU-IFAM JRC
文摘Powder extrusion, which is based on the superplastic behavior of Zn-22%A1 eutectoid alloy, was proposed to reduce the forming load and promises to provide fine microstructures in the manufacture of miniature helical gears. The specifications of the helical gears were as follows： module, 0.3; number of teeth, 12; and helix angle, 15°. Compacted powders were consolidated by sintering and solution heat treatment. The consolidated billets consisted of lamellar and fine-grained microstructures. Extrusion experiments were carried out under the following conditions： temperature, 250 ℃; strain rates, 2.36× 10-3 s^-1 and 1.18× 10^-1 s-1. The mechanical properties of the extruded helical gears were investigated by measurement of the Vickers hardness and extrusion load, and by scanning electron microscopy.
