期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
冷氦直接增压排放推进剂试验系统的研制及性能调试 被引量:1
1
作者 邹震峰 任枫 +3 位作者 程光平 黄永华 李晓慈 汪彬 《低温工程》 CAS CSCD 北大核心 2020年第3期5-10,共6页
针对在液氧贮箱内贮存冷氦气并用于增压煤油贮箱排放的技术方案,研制了一套以液氮为冷源,借助换热器冷却常温氦气获得冷氦,继而送入煤油贮箱进行挤压排放的地面模拟试验系统。对该试验系统的主要功能进行了调试,包括流量调控测试,以及... 针对在液氧贮箱内贮存冷氦气并用于增压煤油贮箱排放的技术方案,研制了一套以液氮为冷源,借助换热器冷却常温氦气获得冷氦,继而送入煤油贮箱进行挤压排放的地面模拟试验系统。对该试验系统的主要功能进行了调试,包括流量调控测试,以及最大排液流量、制冷能力和贮箱内部温度分布测量等。结果表明,该试验系统能够安全可靠地模拟箭上冷氦增压系统的工作过程,可用于相关原理性验证试验和机理研究。 展开更多
关键词 液体火箭 冷氦 增压排放 煤油 试验系统
下载PDF
卧式低温液体贮罐电加热增压排放数值模拟
2
作者 陈虹 谢小树 +1 位作者 常华伟 舒水明 《低温与超导》 CAS 北大核心 2017年第4期13-16,33,共5页
针对卧式液氧贮罐电加热排放过程,对其内部的物理场进行了数值模拟,分析了流体的流动对温度分层的影响以及温度分层现象的成因。研究结果表明,在电加热增压排放过程中,贮罐内部在竖直方向上存在明显的温度分层现象,大体上呈现出了平缓... 针对卧式液氧贮罐电加热排放过程,对其内部的物理场进行了数值模拟,分析了流体的流动对温度分层的影响以及温度分层现象的成因。研究结果表明,在电加热增压排放过程中,贮罐内部在竖直方向上存在明显的温度分层现象,大体上呈现出了平缓的递增趋势,但是由于加热壁面的扰动及冷热流体之间的换热影响,中间区域出现了比较大的梯度分布,导致了贮罐内部压力的上升。在浮升力的驱动下,贮罐内壁和加热壁面之间的液氧呈现出了近似于封闭腔内自然对流的流动状态,并且随着排放的进行,加热壁面和贮罐内壁之间的漩涡会进一步分裂成更小更复杂的漩涡,呈现出复杂的流动状态。 展开更多
关键词 低温流体 增压排放 自然对流 电加热 数值模拟
原文传递
不同激励幅值下液态甲烷贮箱增压过程压力波动特性研究
3
作者 袁晨 金滔 魏健健 《低温工程》 CAS CSCD 北大核心 2023年第1期13-19,共7页
通过动网格模型与VOF模型的耦合,建立了晃动激励工况下液态甲烷贮箱增压排放过程三维计算模型。针对一直径为1.0 m,筒段长度为2.0 m的液态甲烷贮箱,研究了不同激励幅值下贮箱气枕压力变化特性,并对环形防晃板的控压性能进行评估。结果表... 通过动网格模型与VOF模型的耦合,建立了晃动激励工况下液态甲烷贮箱增压排放过程三维计算模型。针对一直径为1.0 m,筒段长度为2.0 m的液态甲烷贮箱,研究了不同激励幅值下贮箱气枕压力变化特性,并对环形防晃板的控压性能进行评估。结果表明:对于激励幅值为0.020 m和0.025 m的工况,液面未出现破碎现象,气枕压降曲线较为平稳。添加防晃板后,液面发生破碎,气枕压降曲线产生明显波动。当激励幅值达到0.030 m和0.035 m时,液面发生破碎,气枕能量占比显著降低,气枕压力出现大幅下降。防晃板的添加可有效减缓气枕压力的下降。 展开更多
关键词 液态甲烷 增压排放 激励幅值 防晃板 压力波动
下载PDF
超临界氦的储存及排放 被引量:3
4
作者 沈漪 蒋宁 +3 位作者 余建平 陈国邦 张福忠 张化照 《低温工程》 CAS CSCD 北大核心 2001年第4期48-53,共6页
叙述了超临界氦储存过程中存在的热分层现象 ,研究了超临界氦储槽的有效容积、日蒸发率、填充率对储槽气枕空间内压力和温度变化的影响 。
关键词 超临界氦 热分层 储存 增压排放 氦气量 估算 液氦
下载PDF
不同增压方式对火箭燃料贮箱冷氦增压效果的影响
5
作者 邹震峰 任枫 +3 位作者 李晓慈 段海洋 杜海浪 黄永华 《上海交通大学学报》 EI CAS CSCD 北大核心 2022年第3期386-394,共9页
针对液氧/煤油火箭燃料贮箱采用的冷氦增压方案,搭建试验系统并进行地面模拟试验.探究不同增压方式,包括增压位置、扩散器形式和增压气体流量对增压排液过程的控压稳定性、贮箱气枕区温度分布、氦气消耗率、气液混合以及液体结冰状态的... 针对液氧/煤油火箭燃料贮箱采用的冷氦增压方案,搭建试验系统并进行地面模拟试验.探究不同增压方式,包括增压位置、扩散器形式和增压气体流量对增压排液过程的控压稳定性、贮箱气枕区温度分布、氦气消耗率、气液混合以及液体结冰状态的影响.结果表明:与气枕区增压相比,气体在液体区增压时换热充分,同等条件下气体消耗率降低33.1%,但控压稳定性较差;扩散器形式对气体消耗率和贮箱气枕区温度分布影响不大;小流量增压更加节约氦气,与40 L/s排液相比,10 L/s排液可以节约20%氦气;各工况中均未发现液体介质局部过冷结冰现象,且无气泡随液体进入排液管路.试验结果验证了煤油贮箱采用冷氦增压方案的可行性,并为箭上冷氦增压系统的结构设计和工况调节提供参考. 展开更多
关键词 燃料贮箱 冷氦 增压排放 液氧/煤油 地面试验
下载PDF
Combustion and pollutant emission characteristics of coal in a pressurized fluidized bed under O_2/ CO_2 atmosphere 被引量:4
6
作者 段元强 段伦博 +1 位作者 胡海华 赵长遂 《Journal of Southeast University(English Edition)》 EI CAS 2015年第2期188-193,共6页
The pressurized combustion experiments of bituminous coal and lignite under air and O2/CO2 atmospheres were conducted to study the influences of pressure and atmosphere on combustion and the CO, NO, SO2 release proces... The pressurized combustion experiments of bituminous coal and lignite under air and O2/CO2 atmospheres were conducted to study the influences of pressure and atmosphere on combustion and the CO, NO, SO2 release process. Two indices, the maximum concentration and the total emission, were applied to quantitatively evaluate the influence of several different operating parameters such as pressure, atmosphere and temperature on the formation of NO and SO2 during coal combustion in the fluidized bed. The experimental results show that the releasing profiles of CO, NO and SO2 during coal combustion under a pressurized oxy- fuel atmosphere are similar to those under a pressurized air atmosphere, and the curves of measured gas components are all unimodal. Under the oxy-fuel condition, pressure increasing from 0.1 to 0.7 MPa can cause the inhibition of NO and SO2 emission. The elevation of temperature can lead to an increase in the maximum concentration and the total production of NO and SO2, and the increase under atmospheric pressure is higher than that under high pressure. 展开更多
关键词 pressurized oxy-fuel combustion fluidized bed SO2 emission NO emission
下载PDF
Collaborative optimization of exhaust gas recirculation and Miller cycle of two-stage turbocharged marine diesel engines based on particle swarm optimization 被引量:1
7
作者 TANG Xu-yang WANG Peng +3 位作者 ZHANG Zhong-yuan ZHANG Feng-li SHI Lei DENG Kang-yao 《Journal of Central South University》 SCIE EI CAS CSCD 2022年第7期2142-2156,共15页
To meet increasingly stringent emission standards and lower the brake-specific fuel consumption(BSFC)of marine engines,a collaborative optimization study of exhaust gas recirculation(EGR)and a Miller cycle coupled tur... To meet increasingly stringent emission standards and lower the brake-specific fuel consumption(BSFC)of marine engines,a collaborative optimization study of exhaust gas recirculation(EGR)and a Miller cycle coupled turbocharging system was carried out.In this study,a one-dimensional numerical model of the EGR,Miller cycle,and adjustable two-stage turbocharged engine based on WeiChai 6170 marine diesel engine was established.The particle swarm optimization algorithm was used to achieve multi-input and multi-objective comprehensive optimization,and the effects of EGR-coupled Miller regulation and high-pressure turbine bypass regulation on NO_(x)and BSFC were investigated.The results showed that a medium EGR rate-coupled medium Miller degree was better for the comprehensive optimization of NO_(x)and BSFC.At medium EGR rate and low turbine bypass rates,NO_(x)and BSFC were relatively balanced and acceptable.Finally,an optimal steady-state control strategy under full loads was proposed.With an increase in loads,the optimized turbine bypass rate and Miller degree gradually increased.Compared with the EGRonly system,the optimal system of EGR and Miller cycle coupled turbine bypass reduced NO_(x)by 0.87 g/(kW·h)and BSFC by 17.19 g/(kW·h)at 100%load.Therefore,the EGR and Miller cycle coupled adjustable two-stage turbocharging achieves NO_(x)and BSFC optimization under full loads. 展开更多
关键词 exhaust gas recirculation(EGR) Miller cycle NO_(x)emissions adjustable two-stage turbocharging particle swarm optimization
下载PDF
Experimental study on the effects of HP and LP EGR on thermal efficiency and emissions of a two-stage turbocharged diesel engine 被引量:7
8
作者 WU BinYang PU YouZhe +1 位作者 YU XiaoYang SU WanHua 《Science China(Technological Sciences)》 SCIE EI CAS 2014年第2期379-389,共11页
An experimental study was performed to compare the effects of high-and low-pressure exhaust gas recirculation loops(HP and LP EGR loops)on thermal efficiency and emissions of a diesel engine.Tests were conducted on a ... An experimental study was performed to compare the effects of high-and low-pressure exhaust gas recirculation loops(HP and LP EGR loops)on thermal efficiency and emissions of a diesel engine.Tests were conducted on a 12-L six-cylinder turbocharged diesel engine under various operating conditions.We found that at a low speed of 1100 r/min,1 MPa BMEP,the LP EGR loop could achieve higher brake thermal efficiency and lower emissions than the HP EGR.This is because the lower enthalpy available at the turbine inlet of the HP EGR loop increased the fuel/oxygen equivalence ratio.For the HP EGR,the gross indicated thermal efficiency was reduced by 1%,but pumping losses were only reduced by 0.5%,compared to the LP EGR loop.At a higher speed of 1600 r/min,1 MPa BMEP,the HP EGR loop attained a higher brake thermal efficiency and lower emissions because of the relatively sufficient flow through the turbocharger.For the HP EGR loop,the gross indicated thermal efficiency was only reduced by 0.5%and pumping losses were reduced by 1.5%,compared to the LP EGR loop.Lower fuel consumption and a longer ignition delay made the distribution of fuel/oxygen equivalence ratio more homogeneous,leading to lower emissions.Our data also showed that at the high speed of 1600 r/min,0.55 MPa BMEP,the brake thermal efficiency of the HP EGR loop first increased,then decreased as the EGR rate increased.Therefore,under all conditions,a reasonable match of both EGR loops could achieve a good balance between fuel consumption and emissions of NOx and soot. 展开更多
关键词 HP EGR LP EGR two-stage turbocharger system thermal efficiency EMISSIONS
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部