3D numerical simulations of dynamical tensile response of hybrid carbon nanotube(CNT)and SiC nanoparticle reinforced AZ91D magnesium(Mg)based composites considering interface cohesion over a temperature range from 25 ...3D numerical simulations of dynamical tensile response of hybrid carbon nanotube(CNT)and SiC nanoparticle reinforced AZ91D magnesium(Mg)based composites considering interface cohesion over a temperature range from 25 to 300℃ were carried out using a 3D representative volume element(RVE)approach.The simulation predictions were compared with the experimental results.It is clearly shown that the overall dynamic tensile properties of the nanocomposites at different temperatures are improved when the total volume fraction and volume fraction ratio of hybrid CNTs to SiC nanoparticles increase.The overall maximum hybrid effect is achieved when the hybrid volume fraction ratio of CNTs to SiC nanoparticles is in the range from 7:3 to 8:2 under the condition of total volume fraction of 1.0%.The composites present positive strain rate hardening and temperature softening effects under dynamic loading at high temperatures.The simulation results are in good agreement with the experimental data.展开更多
Flow visualization and hot-wire measurement techniques were combined to investigate the influence of the size and number of tabs on jet flow field and vortex structure generation mechanism. Streamwise vortices generat...Flow visualization and hot-wire measurement techniques were combined to investigate the influence of the size and number of tabs on jet flow field and vortex structure generation mechanism. Streamwise vortices generated by the tabs of different sizes and numbers were observed from the flow visualization images. Combined with flow visualization, hot-wire measurement gave a quantitative insight of the effect of various tabbed jet flows. Instantaneous two-component velocity signals (longitudinal and transverse velocity components) at different cross sections along radius direction and streamwise direction with different tabbed jet nozzles were measured using hot-wire anemometer. Average flow field parameters of tabbed jet flow such as mean velocity, tur-bulence intensity, vorticity were analyzed and the effects of tabs with different sizes and numbers were compared with that of circular no-tab jet flow. It is revealed that the generation of a series of counter-rotating quasi-streamwise vortices, azimuthal vortices and double-row azi-muthal vortex are the reasons for mixing enhancement of tabbed turbulent jet flow.展开更多
In order to study the dynamic characteristics of multilayer fiber reinforced plastic(MFRP)shaft,the coupling model of three-dimensional equivalent bending stiffness theory and transfer matrix method is established,and...In order to study the dynamic characteristics of multilayer fiber reinforced plastic(MFRP)shaft,the coupling model of three-dimensional equivalent bending stiffness theory and transfer matrix method is established,and the influence of thickness-radius ratio,length-radius ratio,layer angles,layer proportion,and stacked approaches on MFRP shaft dynamic characteristics is investigated.The result shows that the proposed coupling model has high accuracy in MFRP shaft dynamic performance prediction.The proportion of small-angle layers is the decisive factor of MFRP shaft natural frequency.With the increase of thickness-radius ratio and length-radius ratio,the natural frequency of MFRP shaft decreases.The natural frequency of MFRP shaft with the angle layers combination of±45°and±90°is smaller compared with the metal shaft no matter in simple/free boundary condition or simple/simple supported boundary condition.展开更多
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(11672055,11272072).
文摘3D numerical simulations of dynamical tensile response of hybrid carbon nanotube(CNT)and SiC nanoparticle reinforced AZ91D magnesium(Mg)based composites considering interface cohesion over a temperature range from 25 to 300℃ were carried out using a 3D representative volume element(RVE)approach.The simulation predictions were compared with the experimental results.It is clearly shown that the overall dynamic tensile properties of the nanocomposites at different temperatures are improved when the total volume fraction and volume fraction ratio of hybrid CNTs to SiC nanoparticles increase.The overall maximum hybrid effect is achieved when the hybrid volume fraction ratio of CNTs to SiC nanoparticles is in the range from 7:3 to 8:2 under the condition of total volume fraction of 1.0%.The composites present positive strain rate hardening and temperature softening effects under dynamic loading at high temperatures.The simulation results are in good agreement with the experimental data.
基金National Natural Science Foundation of China (No.10472081)Program for New Century Excellent Talents in Universities of Minis-try of Education of China and Plan of Tianjin Science and Technology Development (No.06TXTJJC13800)
文摘Flow visualization and hot-wire measurement techniques were combined to investigate the influence of the size and number of tabs on jet flow field and vortex structure generation mechanism. Streamwise vortices generated by the tabs of different sizes and numbers were observed from the flow visualization images. Combined with flow visualization, hot-wire measurement gave a quantitative insight of the effect of various tabbed jet flows. Instantaneous two-component velocity signals (longitudinal and transverse velocity components) at different cross sections along radius direction and streamwise direction with different tabbed jet nozzles were measured using hot-wire anemometer. Average flow field parameters of tabbed jet flow such as mean velocity, tur-bulence intensity, vorticity were analyzed and the effects of tabs with different sizes and numbers were compared with that of circular no-tab jet flow. It is revealed that the generation of a series of counter-rotating quasi-streamwise vortices, azimuthal vortices and double-row azi-muthal vortex are the reasons for mixing enhancement of tabbed turbulent jet flow.
文摘In order to study the dynamic characteristics of multilayer fiber reinforced plastic(MFRP)shaft,the coupling model of three-dimensional equivalent bending stiffness theory and transfer matrix method is established,and the influence of thickness-radius ratio,length-radius ratio,layer angles,layer proportion,and stacked approaches on MFRP shaft dynamic characteristics is investigated.The result shows that the proposed coupling model has high accuracy in MFRP shaft dynamic performance prediction.The proportion of small-angle layers is the decisive factor of MFRP shaft natural frequency.With the increase of thickness-radius ratio and length-radius ratio,the natural frequency of MFRP shaft decreases.The natural frequency of MFRP shaft with the angle layers combination of±45°and±90°is smaller compared with the metal shaft no matter in simple/free boundary condition or simple/simple supported boundary condition.
