墨离军及其相关问题

墨离军是唐高宗晚期至武则天初期设在瓜州的一大军镇 ,其名称与吐谷浑国境内的墨离川、墨离海、墨离部落有关。“墨离”是吐谷浑语“狼”的意思 ,墨离军的主体原为投唐的吐谷浑人的蕃军 ,故以吐谷浑语词命名。文章还指出 ,由于东部天山和蒙古高原的葛逻禄人与吐谷浑人同源同种 ,所以也有谋剌部落和墨离军 ;归义军时期 ,瓜州的吐谷浑居民相当多。

敦煌吐蕃文书中的“色通(Se tong)”考

敦煌吐蕃文文书中出现地名色通(se tong),应该是敦煌汉文文书中的西同,即今甘肃省阿克塞哈萨克族自治县境内的苏干湖及其附近地区。吐蕃统治时期在该地设有敦煌通颊色通巴(tmhong kyab se tong phavi)军事部落,由吐蕃、吐谷浑、党项、汉等部族成员组成,西同(se tong)亦即敦煌吐鲁番文书中记载的墨离川、墨离海地区。

“笺释“使君”

“笺释“使君”方中“使君”一名，在历代文选中经常出现，是对州一级长官即刺史或太守的一种称呼，并非实际官职。如《全唐文》所收李峤《为杭州崔使君贺加尊号表》，崔某实际任职是杭州刺史，而作者在写作这篇表文时却尊称他为使君。又如《资治通鉴》卷５８所载汉末梁鹄...

晚唐五代宋初归义军外职军将研究

晚唐五代宋初归义军外职军将研究冯培红归义军建立于晚唐大中初年．敦煌人张议潮率众起事．逐蕃归唐，唐廷遂于沙州置节，成为唐王朝的一个边缘藩镇。归义军历经张、曹二氏，相继执掌政权，沿及五代、宋初．存在了一百八十余年。归义军建节沙州，但其势力活动在河西走廊西...

Effects of graphite content on microstructure and tribological properties of graphite/TiC/Ni-base alloy composite coatings

In order to reduce the friction coefficients and further improve the anti-wear properties of Ni-base alloy coatings reinforced by TiC particles,graphite/TiC/Ni-base alloy（GTN） coatings were prepared on the surface of 45 carbon steel.The effects of graphite content on the microstructure and tribological properties of the GTN coatings were investigated.The results show that the addition of graphite to the GTN coatings may greatly reduce the friction coefficients and improve their wear resistance.The 6.56GTN and 12.71GTN coatings exhibit excellent integrated properties of anti-friction and wear resistance under low and high loads,respectively.Under a low load,the wear mechanisms of the GTN coatings are mainly multi-plastic deformation with slight abrasive wear and gradually change into mixture of multi-plastic deformation,delamination and micro-cutting wear with the increase of graphite fraction.As the load increases,the main wear mechanisms gradually change from micro-cracks,micro-cutting and adhesive wear to micro-cutting and micro-fracture with the increase of graphite fraction.

关于《苦峪城断碑》的年代

关于《苦峪城断碑》的年代马雅伦《苦峪城断碑》已佚，没有留下碑拓及照片，亦没有留下任何文字性的辑录。目前学者引用碑文资料主要根据《甘州新志》及《陇右金石录》的部分文字记载摘录而成，李并成《唐代瓜州（晋昌郡）治所及其有关城址的调查与研究》一文认为碑为张议...

改变看法 还原水墨的真实存在

讨论水墨离不开文化,也离不开时代,更离不开一种新态度的艺术思维的开拓,而青年一代是无论如何都将承载水墨艺术发展与拓宽的责任和必然。整个20世纪对水墨以及另一种水墨命名的"中国画"有着复杂而不断的争议和讨论,至今这种纷争还没有停下来,特别是进入到全球化之后又增加了一层讨论的厚度。从实践的角度,水墨创作必然是以水墨为介质,但如何创作就因此成为观念、态度以及历史观的行为。

Tribological properties of Ni-base alloy composite coating modified by both graphite and TiC particles

In order to reduce the friction coefficient of Ni-base alloy coating and further improve its wear resistance,Ni-base alloy composite coatings modified by both graphite and TiC particles were prepared by plasma spray technology on the surface of 45 carbon steel.The results show that friction coefficient of the composite coating is 47.45% lower than that of the Ni-base alloy coating,and the wear mass loss is reduced by 59.1%.Slip lines and severe adhesive plastic deformation are observed on the worn surface of the Ni-base alloy coating,indicating that the wear mechanisms of the Ni-base alloy coating are multi-plastic deformation wear and adhesive wear.A soft transferred layer abundant in graphite and ferric oxide is developed on the worn surface of the composite coating,which reduces the friction coefficient and wear loss in a great deal.The main wear mechanism of the composite coating is fatigue delamination of the transferred layer.

Ultrasonic synthesis of CoO/graphene nanohybrids as high performance anode materials for lithium-ion batteries

A facile ultrasonic method was used to synthesize CoO/graphene nanohybrids by employing Co4（CO）12 as a cobalt precursor. The nanohybrids were characterized by SEM, TEM and XPS, and the results show that CoO nanoparticles （3-5 nm） distribute uniformly on the surface of graphene. The CoO/graphene nanohybrids display high performance as an anode material for lithium-ion battery, such as high reversible lithium storage capacity （650 mA-h/g after 50 cycles, almost twice that of commercial graphite anode）, high coulombic efficiency （over 95%） and excellent cycling stability. The extraordinary performance arises from the structure of the nanohybrids： the nanosized CoO particles with high dispersity on conductive graphene substrates are beneficial for lithium-ion insertion/extraction, shortening diffusion length for lithium ions and improving conductivity, thus the lithium storage performance was improved.

Molecular dynamics simulation of ion transportation through graphene nanochannels

The model of ion transportation through graphene nanochannels is established by the molecular dynamics simulation method. Statistics of the electric potential and charge distribution are made, respectively, on both sides of graphene nanopore with various diameters. Then, their changing relationship with respect to the nanopore diameter is determined. When applying a uniform electric field, polar water molecules are rearranged so that the corresponding relationship between the polarized degree of these molecules and the nanopore diameter can be created. Based on the theoretical model of ion transportation through nanochannels,the changing relationship between the concentration of anions/cations in nanochannels and bulk solution concentration is quantitatively analyzed. The results show that the increase of potential drop and charge accumulation, as well as a more obvious water polarization, will occur with the decrease of nanopore diameter. In addition, hydrogen ion concentration has a large proportion in nanochannels with a sodium chloride（NaCl） solution at a relative low concentration. As the NaCl concentration increases, the concentration appreciation of sodium ions tends to be far greater than the concentration drop of chloride ions. Therefore, sodium ion concentration makes more contribution to ionic conductance.

Light-induced ZnO/Ag/rGO bactericidal photocatalyst with synergistic effect of sustained release of silver ions and enhanced reactive oxygen species

Silver nanoparticles (Ag NPs) can effectively address the issue of antibiotic-resistant bacterial infections to reduce the potential toxicity of Ag NPs. Although challenging, it is, therefore, necessary to achieve the sustainable release of Ag+ ions from a finite amount of Ag NPs. This study aims at designing an efficient and benign antimicrobial silver-based ternary composite composed of photocatalysis zinc oxide (ZnO) and reduced graphene oxide (rGO) as a carrier, in which the reactive oxygen species (ROS) excited from ZnO and Ag+ ions released from the Ag NPs cooperate to realize an effective antibacterial activity against E. coli and S. aureus. The constant effective bacterial performance of the ternary photocatalyst with minimum Ag content can be attributed to the increase in the available quantity of ROS, which results from the enhanced separation efficiency of the photogenerated carriers. The proposed system notably realized the long-term sustainable release of Ag+ ions with low concentration for 30 days when compared with an equivalent amount of silver nitrate. Moreover, the use of the composite prevents biotoxicity and silver wastage, and imparts enhanced stability to the long-lasting antibacterial efficacy.

Electrochemically exfoliated graphene as high-performance catalyst support to promote electrocatalytic oxidation of methanol on Pt catalysts

Electrochemically exfoliated graphene(EEG)is a kind of high-quality graphene with few oxygen-containing functional groups and defects on the surface,and thereby is more suitable as catalyst support than other carbon materials such as extensively used reduced graphene oxide(rGO).However,it is difficult to grow functional materials on EEG due to its inert surface.In this work,ultra-small Pt nanocrystals(~2.6 nm)are successfully formed on EEG and show better electrocatalytic activity towards methanol oxidation than Pt catalysts on r GO.The outstanding catalytic properties of Pt catalysts on EEG can be attributed to the fast electron transfer through EEG and high quality of Pt catalysts such as small grain size,high dispersibility and low oxidation ratio.In addition,SnO2 nanocrystals are controllably generated around Pt catalysts on EEG to raise the poison tolerance of Pt catalysts through using glycine as a linker.Owing to its outstanding properties such as high electrical conductivity and mechanical strength,EEG is expected to be widely used as a novel support for catalysts.

Adsorption properties of a novel 3D graphene/MgO composite for heavy metal ions

A novel three-dimension(3D)graphene/MgO composite was synthesized through self-assembly and embedding MgO nanoparticle in reduced graphene in situ.Fourier transform infrared(FT-IR)spectroscopy,thermal gravimetric analysis(TGA),scanning electron microscopy(SEM),transmission electron microscope(TEM),powder X-raydiffraction(XRD)and X-rayphotoelectron spectroscopy(XPS)were employed to characterize the prepared 3D graphene/MgO composite.The adsorption performance of some metal ions on 3D graphene/MgO was investigated.The results showed that the adsorption capacity was greater than 3D graphene and the maximum adsorption capacity at 25℃was found to be 358.96 mg/g,388.4 mg/g and 169.8 mg/g for Pb^2+,Cd^2+and Cu^2+,respectively.The adsorption kinetic conformed to the pseudo-second-order kinetic model and the adsorption isotherm was well described by Langmuir model.The thermodynamic constants revealed that the sorption process was endothermic and spontaneous in nature.Based on the results of the removal of heavy metal ions from metal smelting wastewater,it can be concluded that the prepared 3D graphene/MgO composite is an effective and potential adsorbent.

Mild oxidation treatment of graphite anode for Li-ion batteries

The graphite was modified by mild oxidation, and the effects of modification temperature and soaking time on the characteristics of graphite were investigated. The structure and characteristics of the graphite were determined by X-ray diffraction, scanning electron microscopy, BET surface area, particle size analysis and electrochemical measurements. The results show that the modified graphite has a better-developed crystallite structure, larger average particle diameter, smaller surface area, and better electrochemical characteristics than the untrented graphite. The sample mild-oxidized at 600℃ for 3h has the best electrochemical performances with a reversible capacity of 304.5mA·h/g, a irreversible capacity of 66.4mA·h/g, and a initial coulombic efficiency of 82.1%. The charge/discharge properties and a cycling stability of the prototype lithium ion batteries with modified graphite as anodes are improved. Its capacity retention ratio at the 200th cycle is enhanced from 66.75% to 90.15%.

Atmospheric-pressure Air Plasma Treatment of Polyester Fabrics for Inkjet Printing with Pigment Inks

Without any preprocessing,polyester fabric has lower ability to hold on water and inks due to the smooth morphology of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and bleed easily. Pretreatments of polyester fabric were carried out with atmospheric air plasma under different experimental conditions. After plasma treatment the samples were printed with magenta pigment ink. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses indicated that the enhanced color performance was mainly contributed by not only the etching effect but also oxygen-containing polar groups induced onto fiber surfaces through plasma treatment. Thereby the surface modification of polyester fabrics using atmospheric-pressure air plasma offers a potential way to fabric pretreatment for pigment inkjet printing with the advantages of environmental friendly and energy saving over traditional pretreatment methods.

Preparation of N‐vacancy‐doped g‐C_3N_4 with outstanding photocatalytic H_2O_2 production ability by dielectric barrier discharge plasma treatment

Dielectric barrier discharge（DBD） plasma is considered to be a promising method to synthesize solid catalysts. In this work, DBD plasma was used to synthesize a nitrogen‐vacancy‐doped g‐C3N4 catalyst in situ for the first time. X‐ray diffraction, N2 adsorption, ultraviolet–visible spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectrosco‐py, electrochemical impedance spectroscopy, electron paramagnetic resonance, O2 tempera‐ture‐programmed desorption, and photoluminescence were used to characterize the obtained cat‐alysts. The photocatalytic H2O2 production ability of the as‐prepared catalyst was investigated. The results show that plasma treatment influences the morphology, structure, and optical properties of the as‐prepared catalyst. Nitrogen vacancies are active centers, which can adsorb reactant oxygen molecules, trap photoelectrons, and promote the transfer of photoelectrons from the catalyst to the adsorbed oxygen molecules for the subsequent reduction reaction. This work provides a new strat‐egy for synthesizing g‐C3N4‐based catalysts.

Construction of nitrogen and phosphorus co-doped graphene quantum dots/Bi5O7I composites for accelerated charge separation and enhanced photocatalytic degradation performance

Nitrogen and phosphorus co-doped graphene quantum dot-modified Bi5O7 I(NPG/Bi5O7 I)nanorods were fabricated via a simple solvothermal method.The morphology,structure,and optical properties of the as-prepared samples were investigated by X-ray diffraction,scanning electron microscopy,high-resolution transmission electron microscopy,X-ray photoelectron spectroscopy(XPS),and diffused reflectance spectroscopy.The photocatalytic performance was estimated by degrading the broad-spectrum antibiotics tetracycline and enrofloxacin under visible light irradiation.The photodegradation activity of Bi5O7 I improved after its surface was modified with NPGs,which was attributed to an increase in the photogenerated charge transport rate and a decrease in the electron-hole pair recombination efficiency.From the electron spin resonance spectra,XPS valence band data,and free radical trapping experiment results,the main active substances involved in the photocatalytic degradation process were determined to be photogenerated holes and superoxide radicals.A possible photocatalytic degradation mechanism for NPG/Bi5O7 I nanorods was proposed.

γ-Ray Irradiation-Derived MnO/rGO Composites for High Performance Lithium Ion Batteries

We report a γ-ray irradiation reduction method to prepare MnO/reduced graphene oxide （rCO） nanocomposite for the anode of lithium ion batteries. γ-Ray irradiation provides a clean way to generate homogeneously dispersed MnO nanoparticles with finely tuned size on rGO surface without the use of surfactant. The MnO/rGO composite enables a fully charge/discharge in 2 min to gain a reversible specific capacity of 546 （mA-h）/g which is 45 higher than the theoretical value of commercial graphite anode.

Enhanced Oxygen Reduction on Graphene via Y5Si3 Electride Substrate:a First-Principles Study

Manipulating the chemical reactivity of graphene toward oxygen reduced reduction(ORR)is of particular interest for both fundamental research and practical application in fuel cell.Deposing graphene on selected substrate provides a structure-intact strategy to enhance its chemical reactivity due to substrate-induced charge and interface effect.Here,we report the graphene deposited on one-dimensional electride Y5Si3 as an effective ORR catalyst in acidic media.Thermodynamic calculations suggest that depositing graphene on electride materials can facilitate the protonation of O2,which is the rate-determining step based on the four-electron reaction pathway and thus promote the ORR activity.Further electronic calculations reveal that low work function(3.5 eV),superior electrical conductivity and slight charge transfer from substrate to graphene result in the enhanced ORR performance of graphene.These findings shed light on the rational design of ORR catalysts based on graphitic materials and emphasize the critical role of substrates for energy-related electrochemical reactions.

Low Temperature Plasma CVD Grown Graphene by Microwave Surface-Wave Plasma CVD Using Camphor Precursor

Hydrocarbon precursor such as methane has been widely used to grow graphene films and the methods of growing quality graphene films are dominated by thermal CVD （chemical vapor deposition） system. Graphene films grown by plasma process are generally highly defective which in turns degrade the quality of the films. Here, using a green precursor, camphor we demonstrate a simple and economical method to get high-quality graphene film on copper substrate by micro wave surface-wave plasma CVD at relatively low temperature 550℃. Graphene film grown using camphor shows superior quality than that of the film grown using methane. Results revealed that camphor precursor is a good alternative to hydrocarbon precursors for graphene research.