Borehole acoustic reflection logging can provide high resolution images of nearborehole geological structure. However, the conventional seismic migration and imaging methods are not effective because the reflected wav...Borehole acoustic reflection logging can provide high resolution images of nearborehole geological structure. However, the conventional seismic migration and imaging methods are not effective because the reflected waves are interfered with the dominant borehole-guided modes and there are only eight receiving channels per shot available for stacking. In this paper, we apply an equivalent offset migration method based on wave scattering theory to process the acoustic reflection imaging log data from both numerical modeling and recorded field data. The result shows that, compared with the routine post-stack depth migration method, the equivalent offset migration method results in higher stack fold and is more effective for near-borehole structural imaging with low SNR acoustic reflection log data.展开更多
The existing methods for extracting the arrival time and amplitude of ultrasonic echo cannot eff ectively avoid the local interference of ultrasonic signals while drilling,which leads to poor accuracy of the echo arri...The existing methods for extracting the arrival time and amplitude of ultrasonic echo cannot eff ectively avoid the local interference of ultrasonic signals while drilling,which leads to poor accuracy of the echo arrival time and amplitude extracted by an ultrasonic imaging logging-while-drilling tool.In this study,a demodulation algorithm is used to preprocess the ultrasonic simulation signals while drilling,and we design a backpropagation neural network model to fit the relationship between the waveform data and time and amplitude.An ultrasonic imaging logging model is established,and the finite element simulation software is used for forward modeling.The response under diff erent measurement conditions is simulated by changing the model parameters,which are used as the input layer of the neural network model;The ultrasonic echo signal is considered as a low-frequency signal modulated by a high-frequency carrier signal,and a low-pass fi lter is designed to remove the high-frequency signal and obtain the low-frequency envelope signal.Then the amplitude of the envelope signal and its corresponding time are extracted as an output layer of the neural network model.By comparing the application eff ects of the various training methods,we fi nd that the conjugate gradient descent method is the most suitable method for solving the neural network model.The performance of the neural network model is tested using 11 groups of simulation test data,which verify the eff ectiveness of the model and lay the foundation for further practical application.展开更多
基金supported by the National Natural Science Foundation of China (Grant No.50674098)the 863 Program (Grant No.2006AA06Z207 & 2006AA06Z213)the 973 Program (Grant No.2007CB209601)
文摘Borehole acoustic reflection logging can provide high resolution images of nearborehole geological structure. However, the conventional seismic migration and imaging methods are not effective because the reflected waves are interfered with the dominant borehole-guided modes and there are only eight receiving channels per shot available for stacking. In this paper, we apply an equivalent offset migration method based on wave scattering theory to process the acoustic reflection imaging log data from both numerical modeling and recorded field data. The result shows that, compared with the routine post-stack depth migration method, the equivalent offset migration method results in higher stack fold and is more effective for near-borehole structural imaging with low SNR acoustic reflection log data.
基金funded by the Sinopec Engineering Technology Research InstituteThe name of the project is the Research and Development of Drilling Wall Ultrasonic Imaging System(No.PE19011-1)。
文摘The existing methods for extracting the arrival time and amplitude of ultrasonic echo cannot eff ectively avoid the local interference of ultrasonic signals while drilling,which leads to poor accuracy of the echo arrival time and amplitude extracted by an ultrasonic imaging logging-while-drilling tool.In this study,a demodulation algorithm is used to preprocess the ultrasonic simulation signals while drilling,and we design a backpropagation neural network model to fit the relationship between the waveform data and time and amplitude.An ultrasonic imaging logging model is established,and the finite element simulation software is used for forward modeling.The response under diff erent measurement conditions is simulated by changing the model parameters,which are used as the input layer of the neural network model;The ultrasonic echo signal is considered as a low-frequency signal modulated by a high-frequency carrier signal,and a low-pass fi lter is designed to remove the high-frequency signal and obtain the low-frequency envelope signal.Then the amplitude of the envelope signal and its corresponding time are extracted as an output layer of the neural network model.By comparing the application eff ects of the various training methods,we fi nd that the conjugate gradient descent method is the most suitable method for solving the neural network model.The performance of the neural network model is tested using 11 groups of simulation test data,which verify the eff ectiveness of the model and lay the foundation for further practical application.
