The problems associated with vibrations of viaducts and low-frequency structural noise radiation caused by train excitation continue to increase in importance.A new floating-slab track vibration isolator-non-obstructi...The problems associated with vibrations of viaducts and low-frequency structural noise radiation caused by train excitation continue to increase in importance.A new floating-slab track vibration isolator-non-obstructive particle damping-phononic crystal vibration isolator is proposed herein,which uses the particle damping vibration absorption technology and bandgap vibration control theory.The vibration reduction performance of the NOPD-PCVI was analyzed from the perspective of vibration control.The paper explores the structure-borne noise reduction performance of the NOPD-PCVIs installed on different bridge structures under varying service conditions encountered in practical engineering applications.The load transferred to the bridge is obtained from a coupled train-FST-bridge analytical model considering the different structural parameters of bridges.The vibration responses are obtained using the finite element method,while the structural noise radiation is simulated using the frequency-domain boundary element method.Using the particle swarm optimization algorithm,the parameters of the NOPD-PCVI are optimized so that its frequency bandgap matches the dominant bridge structural noise frequency range.The noise reduction performance of the NOPD-PCVIs is compared to the steel-spring isolation under different service conditions.展开更多
By using the plane-wave-expansion method, the band structure of three-dimension phononic crystals was calculated, in which the cuboid scatterers were arranged in a host with a face-centered-cubic （FCC） structure.The...By using the plane-wave-expansion method, the band structure of three-dimension phononic crystals was calculated, in which the cuboid scatterers were arranged in a host with a face-centered-cubic （FCC） structure.The influences of a few factors such as the component materials, the filling fraction of scatterers and the ratio （RHL） of the scatterer＇s height to its length on the band-gaps of phononic crystals were investigated.It is found that in the three-dimension solid phononic crystals with FCC structure, the optimum case to obtain band-gaps is to embed high-velocity and high-density scatterers in a low-velocity and low-density host. The maximum value of band-gap can be obtained when the filling fraction is in the middle value. It is also found that the symmetry of the scatterers strongly influences the band-gaps. For RHL＞1, the width of the band-gap decreases as RHL increases. On the contrary, the width of the band-gap increases with the increase of RHL when RHL is smaller than 1.展开更多
We present a detailed theoretical study on the acoustic band structure of two-dimensional （2D） phononic crystal. The 2D pho- nonic crystal with parallelogram lattice structure is considered to be formed by rigid sol...We present a detailed theoretical study on the acoustic band structure of two-dimensional （2D） phononic crystal. The 2D pho- nonic crystal with parallelogram lattice structure is considered to be formed by rigid solid rods embedded in air. For the circu- lar rods, some of the extrema of the acoustic bands appear in the usual high-symmetry points and, in contrast, we find that some of them are located in other specific lines. For the case of elliptic rods, our results indicate that it is necessary to study the whole first Brillouin zone to obtain rightly the band structure and corresponding band gaps. Furthermore, we evaluate the first and second band gaps using the plane wave expansion method and find that these gaps can be tuned by adjusting the side lengths ratio R, inclined angle 0 and filling fraction F of the parallelogram lattice with circular rods. The results show that the largest value of the first band gap appears at θ=90° and F--0.7854. In contrast, the largest value of the second band gap is at θ=60° and F=0.9068. Our results indicate that the improvement of matching degree between scatterers and lattice pattern, ra- ther than the reduction of structural symmetry, is mainly responsible for the enhancement of the band gaps in the 2D phononic crystal.展开更多
基金Project(51978585)supported by the National Natural Science Foundation,ChinaProject(2022YFB2603404)supported by the National Key Research and Development Program,China+1 种基金Project(U1734207)supported by the High-speed Rail Joint Fund Key Projects of Basic Research,ChinaProject(2023NSFSC1975)supported by the Sichuan Nature and Science Foundation Innovation Research Group Project,China。
文摘The problems associated with vibrations of viaducts and low-frequency structural noise radiation caused by train excitation continue to increase in importance.A new floating-slab track vibration isolator-non-obstructive particle damping-phononic crystal vibration isolator is proposed herein,which uses the particle damping vibration absorption technology and bandgap vibration control theory.The vibration reduction performance of the NOPD-PCVI was analyzed from the perspective of vibration control.The paper explores the structure-borne noise reduction performance of the NOPD-PCVIs installed on different bridge structures under varying service conditions encountered in practical engineering applications.The load transferred to the bridge is obtained from a coupled train-FST-bridge analytical model considering the different structural parameters of bridges.The vibration responses are obtained using the finite element method,while the structural noise radiation is simulated using the frequency-domain boundary element method.Using the particle swarm optimization algorithm,the parameters of the NOPD-PCVI are optimized so that its frequency bandgap matches the dominant bridge structural noise frequency range.The noise reduction performance of the NOPD-PCVIs is compared to the steel-spring isolation under different service conditions.
基金This work was supported by the Natural Science Foundation of Hu＇nan Province （Grant No. 00JJY2072） the Foundation of Educational Committee of Hu＇nan Province （Grant No. 01B019）.
文摘By using the plane-wave-expansion method, the band structure of three-dimension phononic crystals was calculated, in which the cuboid scatterers were arranged in a host with a face-centered-cubic （FCC） structure.The influences of a few factors such as the component materials, the filling fraction of scatterers and the ratio （RHL） of the scatterer＇s height to its length on the band-gaps of phononic crystals were investigated.It is found that in the three-dimension solid phononic crystals with FCC structure, the optimum case to obtain band-gaps is to embed high-velocity and high-density scatterers in a low-velocity and low-density host. The maximum value of band-gap can be obtained when the filling fraction is in the middle value. It is also found that the symmetry of the scatterers strongly influences the band-gaps. For RHL＞1, the width of the band-gap decreases as RHL increases. On the contrary, the width of the band-gap increases with the increase of RHL when RHL is smaller than 1.
基金supported by the National Natural Science Foundation of China(Grant No.10974206)
文摘We present a detailed theoretical study on the acoustic band structure of two-dimensional （2D） phononic crystal. The 2D pho- nonic crystal with parallelogram lattice structure is considered to be formed by rigid solid rods embedded in air. For the circu- lar rods, some of the extrema of the acoustic bands appear in the usual high-symmetry points and, in contrast, we find that some of them are located in other specific lines. For the case of elliptic rods, our results indicate that it is necessary to study the whole first Brillouin zone to obtain rightly the band structure and corresponding band gaps. Furthermore, we evaluate the first and second band gaps using the plane wave expansion method and find that these gaps can be tuned by adjusting the side lengths ratio R, inclined angle 0 and filling fraction F of the parallelogram lattice with circular rods. The results show that the largest value of the first band gap appears at θ=90° and F--0.7854. In contrast, the largest value of the second band gap is at θ=60° and F=0.9068. Our results indicate that the improvement of matching degree between scatterers and lattice pattern, ra- ther than the reduction of structural symmetry, is mainly responsible for the enhancement of the band gaps in the 2D phononic crystal.
