Qingshankou shale(Gulong area,China)exhibits strong acoustic anisotropy characteristics,posing significant challenges to its exploration and development.In this study,the five full elastic constants and multipole resp...Qingshankou shale(Gulong area,China)exhibits strong acoustic anisotropy characteristics,posing significant challenges to its exploration and development.In this study,the five full elastic constants and multipole response law of the Qingshankou shale were studied using experimental measurements.Analyses show that the anisotropy parametersϵandγin the study region are greater than 0.4,whereas the anisotropy parameterδis smaller,generally 0.1.Numerical simulations show that the longitudinal and transverse wave velocities of these strong anisotropic rocks vary significantly with inclination angle,and significant differences in group velocity and phase velocity are also present.Acoustic logging measures the group velocity in dipped boreholes;this differs from the phase velocity to some extent.As the dip angle increases,the longitudinal and SH wave velocities increase accordingly,while the qSV-wave velocity initially increases and then decreases,reaching its maximum value at a dip of approximately 40°.These results provide an effective guide for the correction and modeling of acoustic logging time differences in the region.展开更多
It is still argued whether we measure phase or group velocities using acoustic logging tools. In this paper, three kinds of models are used to investigate this problem by theoretical analyses and numerical simulations...It is still argued whether we measure phase or group velocities using acoustic logging tools. In this paper, three kinds of models are used to investigate this problem by theoretical analyses and numerical simulations. First, we use the plane-wave superposition model containing two plane waves with different velocities and able to change the values of phase velocity and group velocity. The numerical results show that whether phase velocity is higher or lower than group velocity, using the slowness-time coherence （STC） method we can only get phase velocities. Second, according to the results of the dispersion analysis and branch-cut integration, in a rigid boundary borehole model the results of dispersion curves and the waveforms of the first-order mode show that the velocities obtained by the STC method are phase velocities while group velocities obtained by arrival time picking. Finally, dipole logging in a slow formation model is investigated using dispersion analysis and real-axis integration. The results of dispersion curves and full wave trains show similar conclusions as the borehole model with rigid boundary conditions.展开更多
基金supported by Major Science and Technology Special Project of China National Petroleum Corporation"Research on Large scale Storage and Production Increase and Exploration and Development Technology of Continental Shale Oil"(2023ZZ15)。
文摘Qingshankou shale(Gulong area,China)exhibits strong acoustic anisotropy characteristics,posing significant challenges to its exploration and development.In this study,the five full elastic constants and multipole response law of the Qingshankou shale were studied using experimental measurements.Analyses show that the anisotropy parametersϵandγin the study region are greater than 0.4,whereas the anisotropy parameterδis smaller,generally 0.1.Numerical simulations show that the longitudinal and transverse wave velocities of these strong anisotropic rocks vary significantly with inclination angle,and significant differences in group velocity and phase velocity are also present.Acoustic logging measures the group velocity in dipped boreholes;this differs from the phase velocity to some extent.As the dip angle increases,the longitudinal and SH wave velocities increase accordingly,while the qSV-wave velocity initially increases and then decreases,reaching its maximum value at a dip of approximately 40°.These results provide an effective guide for the correction and modeling of acoustic logging time differences in the region.
基金supported by the National Natural Science Foundation of China (Grant No. 40774099, 10874202 and 11134011)National 863 Program of China (Grant No. 2008AA06Z205)
文摘It is still argued whether we measure phase or group velocities using acoustic logging tools. In this paper, three kinds of models are used to investigate this problem by theoretical analyses and numerical simulations. First, we use the plane-wave superposition model containing two plane waves with different velocities and able to change the values of phase velocity and group velocity. The numerical results show that whether phase velocity is higher or lower than group velocity, using the slowness-time coherence （STC） method we can only get phase velocities. Second, according to the results of the dispersion analysis and branch-cut integration, in a rigid boundary borehole model the results of dispersion curves and the waveforms of the first-order mode show that the velocities obtained by the STC method are phase velocities while group velocities obtained by arrival time picking. Finally, dipole logging in a slow formation model is investigated using dispersion analysis and real-axis integration. The results of dispersion curves and full wave trains show similar conclusions as the borehole model with rigid boundary conditions.
