环空超声波技术发展前景探讨

本文针对热洗清蜡存在压产、易地油层造成损害、影响油井时率等问题。阐述了环空超声叔技术的原理及现场试验情况。对偏心井来讲，环空超声波技术可以代替热洗清蜡，达到清蜡时不污染油层、不压产的目的。另外，本文还探讨了环空超声波技术新的发展前景使环空超声波技术更趋完善，范围更加广泛。

由建筑生长出来的环境空间——安徽广播电视新中心环境概念设计

在现有建筑条件的基础上,尊重原有建筑的风格和空间场所是景观设计的基本原则。环境的形式和肌理与建筑的文化和自然双重属性相关,并且能够反映其特征,将环境设计融合建筑,让环境由建筑生长出来。

SPEECH ENHANCEMENT METHOD FOR LPC AUTOREGRESSIVE MODEL AND SYSTEM IMPLEMENTATION OF COMMAND WORD RECOGNITION USED IN NOISY ENVIRONMENT

At present, almost all the systems and products for speech recognition are working in quiet environment and their performances are degraded or even can′t work when they are operated in high noisy environment. In this paper, after analyzing the features of speech and noise, a speech enhancement method for LPC autoregressive model for command words recognition used in noisy environment is proposed, and an experimental system is realized. In different background noisy environments, we conduct experiments about SNR, basic accuracy, noise resistant ability and system environment adaptability with different microphones. The experimental results show that the system has good recognition performance in high noisy environments. The system can resist many kinds of noises and meet the needs of application areas on the whole such as military, traffic, marketplace and factory etc.

Roller Profile Online Measurement Based on Ultrasonic Circulation Pulse-echo Technology

In order to meet the high precision requirement of wide steel strip in industry field, a novel online measurement of roller profile based on sonic circulation and pulse-echo technology was introduced. All kinds of the factors influencing the accuracy of roller profile online measurement were analyzed in detail and error compensation analysis of system was accordingly presented. In order to reduce count error, field program gate array(FPGA) was introduced and a highprecision data acquisition system was designed based on digital phase-shift technology. Experiments indicate that the standard deviation of measure data was 7.27 μm, which showed the feasibility and validity of the proposed method, and realized the roll profile measurement with high precision.

Time exposure acoustics in seismic exploration

An analysis of a passive seismic method for subsurface imaging is presented in which ambient seismic noise is employed as the source of illumination of subsurface scatterers. The imaging algorithm can incorporate new data into the image in a recursive fashion which causes image background noise to diminish over time. Under the assumption of spatially-incoherent ambient noise, an analytical expression for the point-spread function of the imaging algorithm is derived. The point-spread function （PSF） characterizes the resolution of the image, which is a function of the receiving array length and the ambient bandwidth.

Ultrasonic testing and microscopic analysis on concrete under sulfate attack and cyclic environment

The damage process of concrete exposed to sodium sulfate attack and drying-wetting cycles was investigated. The water to binder(W/B) ratio and the concentration of sulfate solution were taken as variable parameters. Through the experiment, visual change, relative dynamic modulus of elasticity(RDME) and the surface damage layer thickness of concrete were measured.Furthermore, SEM and thermal analysis were used to investigate the changing of microstructure and corrosion products of concrete.The test results show that the ultrasonic velocity is related to the damage layer of concrete. It approves that an increase in damage layer thickness reduces the compactness and the ultrasonic velocity. The deterioration degree of concrete could be estimated effectively by measuring the surface damage layer and the RDME of concrete. It is also found that the content of gypsum in concrete is less than that of ettringite in test, and some gypsum is checked only after a certain corrosion extent. When the concrete is with high W/B ratio or exposed to high concentration of sulfate solution, the content of ettringite first increases and then decreases with corrosion time. However, the content of gypsum increases at a steady rate. The content of corrosion products does not correspond well with the observations of RDME change, and extensive amount of corrosion products can be formed before obvious damage occurs.

Processing Seismic Ambient Noise Data to Obtain Reliable Surface Wave Dispersion Measurements

Ambient noise tomography is a rapidly emerging field of seismological research. This paper presents the current status of ambient noise data processing and its development history over the past several years, with the intention to explain and justify this development through salient examples. The ambient noise data processing procedure can be divided into four principal phases： ① single station data preparation; ② cross- correlation and temporal stacking; ③ measurements of dispersion curves （ performed with frequency-time analysis for both group and phase speeds） ; ④ quality control, including SNR analysis and selection of the acceptable measurements. In addition, we provide a specific solution for a better use of the seismic station data to ambient noise study.

A Model Based Study for Echo Cancelling in Fluid Filled Pipelines

This paper uses a reduced model for simulating propagation of acoustic signals in fluid filled pipelines. The study allows a better understanding of the multipath environment found in a pipeline system with the goal of finding optimum solutions for monitoring the pipeline integrity. Data provided both from the simplified model and from an equivalent experimental test rig are implemented using classical time delay estimation algorithms. It is observed an improved accuracy when closing gradually the pipeline end as a result of cancelling the multipath effect at the system＇s terminal.

Damage Analysis of Circulating Soaked Rock Sample Based on Sonic-test Trials

Circulating soaked sandstone and mudstone samples sonic parameters were tested and analyzed, using RSM-SY5 sonic instrument, the variation between soaked times and the velocity of longitudinal wave and shear wave was studied, calculation and analysis of the damage variable of circulating soaked rock samples were taken, with sonic measurement results and the empirical formula, the damage variable formulas associated with cycle times was established. The results showed that： the attenuation of sonic velocity basically in line with the exponential relationship, with cycle times increasing; The results of the critical calculation of damage variables and the strength test are well matched, which further confirms that the occurrence and expansion of new crack inside the rock mass resulted from circulating soaked lead to the decrease of the rock strength; The trend of sonic parameters attenuation and damage variable growth are good correspondence.

Development of an Accurate Low-cost Ultrasonic Localization System for Autonomous Mobile Robots in Indoor Environments

An accurate low-cost ultrasonic localization system is de- veloped for automated mobile robots in indoor environments, which is essential for automatic navigation of mobile robots with various tasks. Although ultrasenic sensors are more cost-effective than other sensors such as Laser Range Finder （LRF） and vision, but they are inaccurate and directionally ambiguons. First, the matched filter is used to measure the distance accurately. For resolving the computational complexity of the matched filter, a new matched filter algorithm with simple compution is proposed. Then, an ultrasonic localization system is proposed which consists of three ultrasonic receivers and two or mote transmitters for improving position and orientation accuracy was developed. Finally, an extended Kalman filter is designed to estimate both the static and dynamic positions and orientations. Various simu lations and experimental results show that the proposed system is effective.

Using Ambient Noise to Study the Seismic Velocity Changes Caused by the Rise and Fall of the Water Level in the Zipingpu Reservoir Region

We study the feature of media changes beneath the Zipingpu reservoir and discuss the process of permeation with the water level rise and fall of the reservoir from January 2005 to January 2008 from ambient noise cross correlation by using continuous seismic data recorded by the stations of Zipingpu seismic network and YZP station. A moving-window cross-spectrum technique has been used to calculate the relative seismic velocity changes between station pairs. Results revealed an obvious relationship between relative seismic velocity, and the water level changes with a time delay that may be caused by permeation during three main impoundments and two large scale disemboguements. Impoundment generates a fast and large impact on the superficial layer, and the changes of seismic velocity is the result of increased pressure and permeation during the impoundment. At the first impoundment, the main effect factor is pressure. During the next two process of impoundment, permeation becomes the main effect factor, affecting the fault at a depth of about 8kin.

Rayleigh Wave Group Velocity Maps of East Guangdong and Its Surrounding Regions from Ambient Seismic Noise Tomography

We perform Rayleigh wave tomography in east Guangdong and its surrounding regions by applying the ambient noise method to broadband data recorded at 26 stations from Guangdong,Fujian and Jiangxi Digital Seismic Networks.Cross-correlations of verticalcomponent ambient noise data are computed in one-day segments and stacked over seven months from March to September,2011.Then Rayleigh wave group dispersion curves are measured using the frequency-time analysis method.Group velocity maps at periods from5s to 15s are inverted.The resulting group velocity maps generally show good correlation with tectonic features,reflecting the velocity variations in the shallow crust.The basin areas are clearly resolved with lower group velocities at the short periods due to thick sedimentary layers,and the mountain areas with higher group velocities due to thin sedimentary layers.The variations of group velocity on the map can draw out the distribution of basins and mountains in study areas.The geothermal field can change the group velocity obviously,and lower group velocities are always found in high geothermal areas.The velocity maps indicate that a low-velocity layer may be found in the study areas.

Rayleigh Wave Tomography of Ningxia and Its Adjacent Areas Based on Ambient Noise

In this article,the vertical components of the continuous waveform data of 90 seismic stations in Ningxia and its adjacent regions recorded from January 2012 to December 2013 are used to obtain the Rayleigh surface wave group velocity dispersion images in the study area( 101°- 112°E,31°-42°N) according to the method of noise imaging,with period between 6s - 50s and resolution of 0.5°. The Yinchuan basin in the 6s - 26 s period obviously shows a low velocity anomaly,which is not uniform and has a tendency to gradually weaken; the Guanzhong Basin in 6 s-22s shows a strip of low velocity anomaly and demonstrates a transverse inhomogeneity,where velocity in the southeast is slightly faster than that in the northwest. In the 30s - 50s period it shows that in the Yinchuan graben basin and its southern area,there is a large low velocity anomaly area,which moves from northeast to southwest. It shows that between the main active tectonic zones,like mountains and basins,there are obvious geomorphologic boundaries. For example,the deep fault near Liupan Mountain is the dividing line between two large tectonic units of eastern and western of China. The inversion results have good correlation with the geological structure and the stratigraphic landform. The results are consistent with the results of artificial seismic section tomography across the basin. It provides an important basis for the dynamics of active tectonic zones and the mechanism of earthquake occurrence in this area.

Low phase noise millimeter wave monolithic integrated phase locked-loop

A Monolithic integrated phase locked-loop （PLL） with a low phase noise is proposed in this paper. Several techniques are utilized to improve the performance of the PLL which works at the milli- meter-wave band. The on-chip high-Q eoplanar waveguides （CPWs） are utilized in the resonant tank and the differential current amplifier with a resonator is used to realize the VCO. In the output buffer circuit, several stages of cascaded source-followers connect and differential amplifiers are adopted to improve the driving capability of the PLL＇ s output signals. An improved analog multiplier topology is also used in the PD circuit to improve the gain of the PD. The proposed PLL is realized with a 0.2p, m GaAs pseudomorphie high electron mobility transistor （PHEMT） process. At 10 kHz offset from the center frequency, the measured output phase noise of the PLL output is only -88.83dBc/Hz. The circuit exhibits a low root mean sauare （RMS） litter of 1.68Ds.

Ultrasonic frogs call at a higher pitch in noisier ambiance

The ultrasonic communication in Concave-eared torrent flogs Odorrana tormota is believed to be an adaptation to avoid masking by the intense low-frequency noise of the rushing stream in their habitat. The acoustic adaptation hypothesis for ultrasonic origin predicts that some organisms subjecting to persistent acoustic interference from broadband, low-frequency en- vironmental noise, might shift their signal frequency upward into frequency bands with lower noise energy. In other words, low-frequency environmental noise might cause upward shifts of species＇ vocalization frequencies making their signals more conspicuous. Presently, it is unclear whether male O. tormota adjust their signal features in response to a change in the ambient noise level. We tested the prediction of the acoustic adaptation hypothesis by recording the vocalizations of male O. tormota in- habiting two streams with different background noise levels in Huangshan in central China and comparing their call features in- cluding the fundamental frequency （F0）. Results showed that the spectrotemporal characteristics of the vocal signals of males in the two habitats were indifferent, except the duration of the call harmonic segments and three parameters related to the call fun- damental frequency （F0）. In terms of the F0, the pooled and individual frog data showed that flogs inhabiting the noisier habitat tended to emit calls having higher F0. The higher F0 increases the signal-to-noise ratio, thus benefiting the detection of vocaliza- tion. Thus, similar to several anuran species, concave-eared torrent frogs also display noise-dependent adjustment of vocal pitch in their vocalizations for making them more audible

Research on transmission performance of a surface acoustic wave sensing system used in manufacturing environment monitoring

Surface acoustic wave （SAW） sensors show great promise in monitoring fast-rotating or moving machinery in manufacturing environments, and have several advantages in the measurement of temperature, torque, pressure, and strain because of their passive and wireless capability. However, very few studies have systematically attempted to evaluate the characteristics of SAW sensors in a metal environment and rotating structures, both of which are common in machine tools. Simulation of the influence of the metal using CST software and a series of experiments with an SAW temperature sensor in real environments were designed to investigate the factors that affect transmission pertbrmance, including antenna angles, orientations, rotation speeds, and a metallic plate, along with the interrogator antenna-SAW sensor antenna separation distance. Our experimental measure- ments show that the sensor＇s optimal placement in manufacturing environments should take into account all these factors in order to maintain system measurement and data transmission capability. As the first attempt to systematically investigate the transmis- sion characteristics of the SAW sensor used in manufacturing environment, this study aims to guide users of SAW sensor appli- cations and encourage more research in the field of wireless passive SAW sensors in monitoring applications.