In planning and executing marine controlled-source electromagnetic methods, seafloor electromagnetic receivers must overcome the problems of noise, clock drift, and power consumption. To design a receiver that perform...In planning and executing marine controlled-source electromagnetic methods, seafloor electromagnetic receivers must overcome the problems of noise, clock drift, and power consumption. To design a receiver that performs well and overcomes the abovementioned problems, we performed forward modeling of the E-field abnormal response and established the receiver＇s characteristics. We describe the design optimization and the properties of each component, that is, low-noise induction coil sensor, low-noise Ag/AgCI electrode, low-noise chopper amplifier, digital temperature-compensated crystal oscillator module, acoustic telemetry modem, and burn wire system. Finally, we discuss the results of onshore and offshore field tests to show the effectiveness of the developed seafloor electromagnetic receiver and its performance： typical E-field noise of 0.12 nV/m/rt（Hz） at 0.5 Hz, dynamic range higher than 120 dB, clock drift lower than 1 ms/day, and continuous operation of at least 21 days.展开更多
In this paper, an indoor environmental monitoring solution is proposed for the transformer sub- station system by using the ZigBee technology. It mainly analyzes the principle of sulfur hexafluoride sensor based on th...In this paper, an indoor environmental monitoring solution is proposed for the transformer sub- station system by using the ZigBee technology. It mainly analyzes the principle of sulfur hexafluoride sensor based on the acoustic method and puts forward a difference data processing method of single- channel and temperature compensation point at power consumption issues for sensor detection. The method not only reduces the sensor power consumption, but also ensures the accuracy and extends the lifetime of wireless sensor nodes effectively. This paper also analyzes the design of the base sta- tion mode, and demonstrates the running processes of routers and sensors. The feasibility of the pro- posed approach has been testified and proved.展开更多
Detecting/sensing targets underwater has very important applications in environmental study, civil engineering and national security. In this paper, an organic-film based triboelectric nanogenerator （TENG） has been ...Detecting/sensing targets underwater has very important applications in environmental study, civil engineering and national security. In this paper, an organic-film based triboelectric nanogenerator （TENG） has been successfully demonstrated for the first time as a self-powered and high sensitivity acoustic sensor to detect underwater targets at low frequencies around 100 Hz. This innovative, cost-effective, simple-design TENG consists of a thin-film-based Cu electrode and a polytetrafluoroethylene （PTFE） film with nanostructures on its surfaces. On the basis of the coupling effect between triboelectrification and electrostatic induction, the sensor generates electrical output signals in response to incident sound waves. Operating at a resonance frequency of 110 Hz, under an acoustic pressure of 144.2 dBspc, the maximum open-circuit voltage and short-circuit current of the generator can respectively reach 65 V and 32 ~A underwater. The directional dependence pattern has a bi-directional shape with a total response angle of 60~. Its sensitivity is higher than -185 dB in the frequency range from 30 Hz to 200 Hz. The highest sensitivity is -146 dB at resonance frequency. The three-dimensional coordinates of an acoustic source were identified by four TENGs, self-powered active sensors, and the location of the acoustic source was determined with an error about 0.2 m. This study not only expands the application fields of TENGs from the atmosphere to water, but also shows the TENG is a promising acoustic source locator in underwater environments.展开更多
基金sponsored by the 863 Program(No.2009AA09A2012012AA09A201)+1 种基金China Geological Survey Project(No.201100307)the Fundamental Research Funds of the Ministry of Education for the Central Universities(No.2652011249)
文摘In planning and executing marine controlled-source electromagnetic methods, seafloor electromagnetic receivers must overcome the problems of noise, clock drift, and power consumption. To design a receiver that performs well and overcomes the abovementioned problems, we performed forward modeling of the E-field abnormal response and established the receiver＇s characteristics. We describe the design optimization and the properties of each component, that is, low-noise induction coil sensor, low-noise Ag/AgCI electrode, low-noise chopper amplifier, digital temperature-compensated crystal oscillator module, acoustic telemetry modem, and burn wire system. Finally, we discuss the results of onshore and offshore field tests to show the effectiveness of the developed seafloor electromagnetic receiver and its performance： typical E-field noise of 0.12 nV/m/rt（Hz） at 0.5 Hz, dynamic range higher than 120 dB, clock drift lower than 1 ms/day, and continuous operation of at least 21 days.
基金Supported by the National Natural Science Foundation of China （ No. 10974044）, the Fundamental Research Funds for the Central Universities of Hohai University （No. 2009B31514） and the 2009 Jiangsu Province Graduate Education Reform and Practical Project （No. 2009-22）.
文摘In this paper, an indoor environmental monitoring solution is proposed for the transformer sub- station system by using the ZigBee technology. It mainly analyzes the principle of sulfur hexafluoride sensor based on the acoustic method and puts forward a difference data processing method of single- channel and temperature compensation point at power consumption issues for sensor detection. The method not only reduces the sensor power consumption, but also ensures the accuracy and extends the lifetime of wireless sensor nodes effectively. This paper also analyzes the design of the base sta- tion mode, and demonstrates the running processes of routers and sensors. The feasibility of the pro- posed approach has been testified and proved.
文摘Detecting/sensing targets underwater has very important applications in environmental study, civil engineering and national security. In this paper, an organic-film based triboelectric nanogenerator （TENG） has been successfully demonstrated for the first time as a self-powered and high sensitivity acoustic sensor to detect underwater targets at low frequencies around 100 Hz. This innovative, cost-effective, simple-design TENG consists of a thin-film-based Cu electrode and a polytetrafluoroethylene （PTFE） film with nanostructures on its surfaces. On the basis of the coupling effect between triboelectrification and electrostatic induction, the sensor generates electrical output signals in response to incident sound waves. Operating at a resonance frequency of 110 Hz, under an acoustic pressure of 144.2 dBspc, the maximum open-circuit voltage and short-circuit current of the generator can respectively reach 65 V and 32 ~A underwater. The directional dependence pattern has a bi-directional shape with a total response angle of 60~. Its sensitivity is higher than -185 dB in the frequency range from 30 Hz to 200 Hz. The highest sensitivity is -146 dB at resonance frequency. The three-dimensional coordinates of an acoustic source were identified by four TENGs, self-powered active sensors, and the location of the acoustic source was determined with an error about 0.2 m. This study not only expands the application fields of TENGs from the atmosphere to water, but also shows the TENG is a promising acoustic source locator in underwater environments.
