Prediction and critical transition mechanism for granite fracture:Insights from critical slowing down theory

Rock fracture warning is one of the significant challenges in rock mechanics.Many true triaxial and synchronous acoustic emission(AE)tests were conducted on granite samples.The investigation focused on the characteristics of AE signals preceding granite fracture,based on the critical slowing down(CSD)theory.The granite undergoes a transition from the stable phase to the fracture phase and exhibits a clear CSD phenomenon,characterized by a pronounced increase in variance and autocorrelation coefficient.The variance mutation points were found to be more identifiable and suitable as the primary criterion for predicting precursor information related to granite fracture,compared to the autocorrelation coefficient.It is noteworthy to emphasize that the CSD factor holds greater potential in elucidating the underlying mechanisms responsible for the critical transition of granite fracture,in comparison to the AE timing parameters.Furthermore,a novel multi-parameter collaborative prediction method for rock fracture was developed by comprehensively analyzing predictive information,including abnormal variation modes and the CSD factor of AE characteristic parameters.This method enhances the understanding and prediction of rock fracture-related geohazards.

Modeling of rock failure based on physical cellular automata

To analyze the effects of heterogeneous material characteristics on rock failure,a micro-heterogeneous physical cellular automata （Mh-PCA） model is introduced according to the cellular automata theory from a general power view.In this model,the neighbor is the Moore pattern and the Weibull distribution is adopted to simulate the rock heterogeneousness.Using this model,the evolvements and acoustic emission of rock failure are simulated for four materials of different degree of homogeneousness （m＝1,5,10,15）.The results show that the heterogeneous characteristic has a great effect on the rock failure,the more the homogeneousness,the fewer the crack branches and the more concentrated acoustic emissions.The physical cellular automata theory gives a new idea for studying rock failure.

Effects of sonic speed on location accuracy of acoustic emission source in rocks

To quantitatively study the location errors induced by deviation of sonic speed, the line and plane location tests were carried out. A broken pencil was simulated as acoustic emission source in the rocks. The line and plane location tests were carried out in the granite rod using two sensors and the cube of marble using four sensors, respectively. To compare the position accuracy between line and plane positions, the line poison test was also carried out on the marble surface. The results show that for line positioning, the maximum error of absolute distance is about 0.8 cm. With the speed difference of 200 m/s, the average value of absolute difference from the position error is about 0.4 cm. For the plane positioning, in the case of the sensor array of 30 cm, the absolute positioning distance is up to 8.7 cm. It can be seen that the sonic speed seriously impacts on the plane positioning accuracy. The plane positioning error is lager than the line positioning error, which means that when the line position can satisfy the need in practical engineering, it is better to use the line position instead of the plane location. The plane positioning error with the diagonal speed is the minimum one.

指数图表

本周深综指开始大幡调整,前期得以支撑指数的小盘、次新、含权股开始全面走弱。

The application of stereo-video technology for the assessment on population change of black rockfish Sebastes schlegeli in a vessel reef area in Haizhou Bay,China

The assessment of population structure and abundance of fish assemblages associated with artificial reefs(ARs) is an important aspect of AR management.In the present study,we used a DiveOperated Stereo Video(stereo-DOV) technique to assess the population structure and abundance of Sebastes schlegeli associated with two metallic,and three wooden,vessel reefs in Haizhou Bay during 2012 and2013.The study used video systems to obtain length measurements and estimates of abundance.The size composition of S.schlegeli differed among reefs and individuals around vessel reefs were all adults,with total lengths(TL) of >20 cm.Juvenile fish were encountered by divers in a rocky area near the island away from the vessel reefs.The largest individual S.schlegeli(with the highest TL) among five reefs were found around a metallic vessel reef in both 2012 and 2013.TL of S.schlegeli from all reefs increased by an average of 3.2 cm(P<0.05) from 2012 to 2013,with an estimated mean weight increase of 250.4 g(P<0.05).The video survey also indicated a decrease in the biomass of schools near two metallic vessels between the years.Stereo-video technology was found to be suitable for rockfish surveys around the reefs.

Incidence of gallstone disease in Italy:Results from a multicenter,population-based Italian study (the MICOL project)

AIM:To evaluate gallstone incidence and risk factors in a large population-based study. METHODS: Gallstone incidence and risk factors, were evaluated by structured questionnaire and physical examination, respectively, in 9611 of 11 109 (86.5%) subjects who were gallstone-free at the cross-sectional study. RESULTS: Six centers throughout Italy enrolled 9611 subjects (5477 males, 4134 females, aged 30-79 years), 9517 of whom were included into analysis: 424 subjects (4.4%) had gallstones and 61 (0.6%) had been cholecystectomized yielding a cumulative incidence of 0.67% per year (0.66% in males, 0.81% in females). Increasing age, a high body mass index (BMI), a history of diabetes, peptic ulcer and angina, and low cholesterol and high triglyceride levels were identifi ed as risk factors in men while, in females, the only risk factors were increasing age and a high BMI.Increasing age and pain in the right hypocondrium in men and increasing age in females were identifi ed as predictors of gallstones. Pain in the epigastrium/ right hypocondrium was the only symptom related to gallstones; furthermore, some characteristics of pain (forcing to rest, not relieved by bowel movements) were significantly associated with gallstones. No correlation was found between gallstone characteristics and clinical manifestations, while increasing age in men and increasing age and BMI in females were predictors of pain. CONCLUSION:Increasing age and BMI represent true risk factors for gallstone disease (GD); pain in the right hypocondrium and/or epigastrium is confi rmed as the only symptom related to gallstones.

Experimental investigations on mechanical performance of rocks under fatigue loads and biaxial confinements

In this research,a series of biaxial compression and biaxial fatigue tests were conducted to investigate the mechanical behaviors of marble and sandstone under biaxial confinements.Experimental results demonstrate that the biaxial compressive strength of rocks under biaxial compression increases firstly,and subsequently decreases with increase of the intermediate principal stress.The fatigue failure characteristics of the rocks in biaxial fatigue tests are functions of the peak value of fatigue loads,the intermediate principal stress and the rock lithology.With the increase of the peak values of fatigue loads,the fatigue lives of rocks decrease.The intermediate principal stress strengthens the resistance ability of rocks to fatigue loads except considering the strength increasing under biaxial confinements.The fatigue lives of rocks increase with the increase of the intermediate principal stress under the same ratio of the fatigue load and their biaxial compressive strength.The acoustic emission(AE)and fragments studies showed that the sandstone has higher ability to resist the fatigue loads compared to the marble,and the marble generated a greater number of smaller fragments after fatigue failure compared to the sandstone.So,it can be inferred that the rock breaking efficiency and rock burst is higher or severer induced by fatigue loading than that induced by monotonous quasi-static loading,especially for hard rocks.

Debris flows monitoring and localization using infrasonic signals

Infrasonic waves （frequency 〈 2o Hz） are generated during the formation and movement of debris flows, traveling in air with a speed far higher than that of the debris-flow movement. Infrasound monitoring and localization of infrasonic waves can serve as warning properties for debris-flows. Based on the characteristics of infrasonic signals, this study presents a three-point array of infrasound sensors as time-synchronous multiple sensors for acquiring signals. In the meantime, the signals are sorted by mutual correlation of signals to figure out their latency, and by means of array coordinating to Locate the sound source to realize the monitoring and positioning of a debris-flows hazard. The method has been in situ tested and has been proven to be accurate in monitoring debris-flow occurrences and determining their positions, which is particularly effective for pre-event warning of debris-flow hazards.

A Physical Simulation Test for the RockBurst in Tunnels

According to the test results of the physical and mechanical properties of similar materials in various quality mixture, a type of material with obvious tendency of rockburst was selected to produce a large-size model to simulate rockburst phenomena in tunnels. The prototype model comes from a typical section of diversion tunnels in Jinping Hydropower Station in China. The simulation of excavating tunnels is carried out by opening a hole in the model after loading. The modeling results indicated that under the condition of normal stresses in the model boundaries the arch top, spandrel and side walls of the tunnel produced an obvious jump reaction of stress and strain and the acoustic emission counts of the surrounding rock also increased rapidly in a different time period after the "tunnel" excavation, showing the clear features of rockburst. The spalling, buckling and breaking occurred in the surrounding rock of model in conditions of over loading. It is concluded that the modeling tunnel segment in Jinping Hydropower Station is expected to form the tensile rockburst with the pattern of spalling, buckling and breaking.

Petrologic composition model of the upper crust in Bohai Bay basin,China,based on Lamé impedances

Seismic attributes, such as P- and S-wave velocity, Poisson＇s ratio, and acoustic impedances, all generally can be used for distinguishing different rock types. The nonuniqueness can be largely reduced using Lame impedances instead of acoustic impedances as additional constraints. We have followed this method to constitute a petrologic composition model of the upper crust in the Bohai Bay basin, China. We briefly review the seismic parameters used for discrimination of rock types and focus our attention on the sensitivity of different combinations of parameters to determine the composition of materials. Corrections for pressure and temperature are performed in order to compare elastic wave velocities and densities measured at room temperature and surface pressure in laboratory with those for representative rock parameters. In a second step, we find the rock classes in the tested area by contrasting known data to laboratory measurements on a variety of rock samples extracted in the area. The basic field data are P-wave velocity values collected along a seismic profile conducted in the Bozhong Depression. The different rock types belonging to a particular rock class are finally constrained by the seismic velocities, Poisson＇s ratio, density, acoustic impedance, and Lame imoedance related to the topmost 10 km of the Bohai Bav crust.

AE waveform characteristics of rock mass under uniaxial loading based on Hilbert-Huang transform

Acoustic Emission(AE)waveforms contain information on microscopic structural features that can be related with damage of coal rock masses.In this paper,the Hilbert-Huang transform(HHT)method is used to obtain detailed structural characteristics of coal rock masses associated with damage,at different loading stages,from the analyses of the characteristics of AE waveforms.The results show that the HHT method can be used to decompose the target waveform into multiple intrinsic mode function(IMF)components,with the energy mainly concentrated in the c1−c4 IMF components,where the c1 component has the highest frequency and the largest amount of energy.As the loading continues,the proportion of energy occupied by the low-frequency IMF component shows an increasing trend.In the initial compaction stage,the Hilbert marginal spectrum is mainly concentrated in the low frequency range of 0−40 kHz.The plastic deformation stage is associated to energy accumulation in the frequency range of 0−25 kHz and 200−350 kHz,while the instability damage stage is mainly concentrated in the frequency range of 0−25 kHz.At 20 kHz,the instability damage reaches its maximum value.There is a relatively clear instantaneous energy peak at each stage,albeit being more distinct at the beginning and at the end of the compaction phase.Since the effective duration of the waveform is short,its resulting energy is small,and so there is a relatively high value from the instantaneous energy peak.The waveform lasts a relatively long time after the peak that coincides with failure,which is the period where the waveform reaches its maximum energy level.The Hilbert three-dimensional energy spectrum is generally zero in the region where the real energy is zero.In addition,its energy spectrum is intermittent rather than continuous.It is therefore consistent with the characteristics of the several dynamic ranges mentioned above,and it indicates more clearly the low-frequency energy concentration in the critical stage of instability failure.This study well reflects the response law of geophysical signals in the process of coal rock instability and failure,providing a basis for monitoring coal rock dynamic disasters.

Study of electromagnetic and acoustic emission in creep experiments of water-containing rock samples

Based on biaxial shear creep tests conducted on rock samples with different water contents, we present the results of our study on the regularities of electromagnetic and acoustic emission during the process of creep experiments in which we have analyzed the contribution of water to the occurrence of electromagnetic radiation. The result shows that in the creep-fracturing course of rock samples, when the water content increases, the initial frequency and amplitude of electromagnetic and acoustic emission also increases, but at a decreasing growth rate caused by loading stress. This can be used as a criterion for the long-term stability of rock masses under conditions of repeated inundation and discharge of water.

Fracture evolution and localization effect of damage in rock based on wave velocity imaging technology

By utilizing wave velocity imaging technology,the uniaxial multi-stage loading test was conducted on siltstone to attain wave velocity imagings during rock fracture.Based on the time series parameters of acoustic emissions(AE),joint response characteristics of the velocity field and AE during rock fracture were analyzed.Moreover,the localization effect of damage during rock fracture was explored by applying wave velocity imagings.The experimental result showed that the wave velocity imagings enable three-dimensional(3-D)visualization of the extent and spatial position of damage to the rock.A damaged zone has a low wave velocity and a zone where the low wave velocity is concentrated tends to correspond to a severely damaged zone.AE parameters and wave velocity imagings depict the changes in activity of cracks during rock fracture from temporal and spatial perspectives,respectively:the activity of cracks is strengthened,and the rate of AE events increases during rock fracture;correspondingly,the low-velocity zones are gradually aggregated and their area gradually increases.From the wave velocity imagings,the damaged zones in rock were divided into an initially damaged zone,a progressively damaged zone,and a fractured zone.During rock fracture,the progressively damaged zone and the fractured zone both develop around the initially damaged zone,showing a typical localization effect of the damage.By capturing the spatial development trends of the progressively damaged zone and fractured zone in wave velocity imagings,the development of microfractures can be predicted,exerting practical significance for determining the position of the main fracture.

Efficacy of intraductal ultrasonography in the diagnosis of non-opaque choledocholith

AIM: To evaluate the efficacy of intraductal ultrasonography (IDUS) in the diagnosis of non-opaque, common bile duct stones. METHODS: A total of 183 patients (102 males, mean age 73 years; 81 females, mean age 70 years) with suspected common bile duct stones diagnosed through abdominal computed tomography (CT), magnetic resonance imaging (MRI), and abdominal Type-B ultrasound were included in the study. The diagnosis was confirmed through endoscopic retrograde cholangiopancreatography (ERCP) followed by IDUS. RESULTS: A total of 183 patients with suspected common bile duct (CBD) stones were included in the study as follows: 36 patients with high-density CBD stones, 68 patients with sand-like stones, 44 patients with low-density stones, 21 patients with ampullary cancer, and 14 patients with pancreatic cancer. Conventional imaging revealed 124 cases of choledochectasia, and only 36 cases of suspected CBD stones; ERCP revealed 145 cases of CBD stones with three missed diagnoses. IDUS revealed 148 cases of CBD stones, 21 cases of ampullary tumors, and 14 cases of pancreatic cancer. CONCLUSION: IDUS was more effective in the diagnosis of bile duct stones than ERCP, upper abdominal CT or upper abdominal MRI.

EXPERIMENTAL RESEARCH ON THE ULTRASONIC TECHNIQUE AND ITS APPLICATION IN STUDYING ROCK PROPERTIES

The experimental installation and measurement system of ultrasonic wave property in rocks during complete stress-strain process were established and perfected. The interrelations between ultrasonic wave property of muds tone, sands tone and limestone specimens during complete stress-strain process and their mechanic property were investigated. A new type of device for the observation of surrounding rock stability-borehole ultrasonic device with completely dry coupling was developed to get better coupling and more accurate measurement data comparing with those of water coupling situation. Preliminary study on the application of ultrasonic measurement technique at belt conveyor roadway of north wing in Baodian Coal Mine (Shandong province) was conducted. Based on the interrelations between the complete stress-strain properties of specimens and their wave properties, the structural properties of surrounding rocks, the range of yield zones, and the change of stresses within surrounding rocks when a longwall face was across over the roadway were analyzed.Therefore,a new and feasible way was found for the research on the deformation law of surrounding rock of roadway and rational selection of support parameters.

Potential of acoustic emissions from three point bending tests as rock failure precursors

Development of failure in brittle materials is associated with microcracks,which release energy in the form of elastic waves called acoustic emissions. This paper presents results from acoustic emission measurements obtained during three point bending tests on Nestos marble under laboratory conditions.Acoustic emission activity was monitored using piezoelectric acoustic emission sensors,and the potential for accurate prediction of rock damage based on acoustic emission data was investigated. Damage localization was determined based on acoustic emissions generated from the critically stressed region as scattered events at stresses below and close to the strength of the material.

Simultaneous endoscopic ultrasound fine needle aspiration and endoscopic retrograde cholangio-pancreatography:Evaluation of safety

AIM: To investigate the rate of complications of endoscopic retrograde cholangio-pancreatography (ERCP) performed immediately after endoscopic ultrasound fine needle aspiration (EUS-FNA) in a large series of patients. METHODS: Patients with the following conditions were considered candidates for EUS-FNA and ERCP: diagnosis of locally advanced or metastatic pancreatic lesion not eligible for surgery, and patients with pancreatic lesion of unknown nature causing jaundice. Data were prospectively collected on the following parameters: indication for FNA, EUS findings, pathological diagnosis, procedure duration of EUS-FNA and combined EUS-FNA and ERCP, and immediate and late complications. RESULTS: From January 2004 to October 2006, 72 patients were deemed eligible for combined EUS and ERCP. In 25/72 EUS-FNA was performed to obtain a pathology diagnosis of lesions causing biliary obstruction, and ERCP sequentially performed to drain the biliary system. No immediate complications occurred except for two mild bleeding episodes post sphincterotomy. No late complications were recorded except for one patient who experienced fever, promptly recovered with antibiotic therapy. CONCLUSION: Simultaneous approach appears to be feasible and safe. When possible, this can be considered the reference standard to avoid double sedation and reduce duration of the procedure and hospital stay.

Ultrasonic attenuation model for measuring particle size and inverse calculation of particle size distribution in mineral slurries

Based on various ultrasonic loss mechanisms, the formula of the cumulative mass percentage of minerals with different particle sizes was given, with which the particle size distribution was integrated into an ultrasonic attenuation model. And then the correlations between the ultrasonic attenuation and the pulp density, and the particle size were obtained. The derived model was combined with the experiment and the analysis of experimental data to determine the inverse model relating ultrasonic attenuation coefficient with size distribution. Finally, an optimization method of inverse parameter, genetic algorithm was applied for particle size distribution. The results of inverse calculation show that the precision of measurement was high.

Laparoscopic cholecystectomy in a patient with situs inversus totalis

Currently, laparoscopic cholecystectomy is an undoubtfully optimal treatment of cholelithiasis. What about performing this procedure on a patient with situs inversus totalis and what are the difficulties of this operation for a right-handed surgeon? We presented a 35-year-old man with unknown situs inversus totalis who was admitted with epigastric pain and digestive problems. Ultrasonography and computed tomography of the abdomen confirmed the diagnosis of a gallstone. Besides, the liver and gallbladder were on the left side and the spleen was on the right. All systems were left-right reversal as mirror image in all diagnostic studies. Laparoscopic cholecystectomy was safely performed, despite of difficulties of situs inversus. The patient was discharged on postoperative day 1. It should be considered that existence of other anomalies may easily cause uninvited injuries. In the patients with situs inversus, laparoscopic cholecystectomy can be safely managed by an experienced surgeon through laparoscopy, and also hepatobiliary surgery.